Evaluation of Enzymatic Kinetics of GOx‐based Electrodes by Scanning Electrochemical Microscopy at Redox Competition Mode

Glucose oxidase (GOx) is an enzyme, which is used for the development of enzymatic biofuel cells. Therefore in this research redox competition mode of scanning electrochemical microscopy (RC‐SECM) was applied for the investigation of glucose oxidase (GOx) catalyzed reaction kinetics. The GOx was immobilized by glutaraldehyde on substrates of different electrical conductivity: (i) gold covered glass was used as conducting substrate and (ii) plastic poly(methyl methacrylate) was used as non‐conducting substrate. Current vs distance dependencies were registered by SECM at different concentrations of glucose in the absence of redox mediator. The potential of −750 mV vs Ag/AgCl(3 M KCl) was applied to the microelectrode (ME), which was used as a probe in SECM, in order to register oxygen reduction current. Consumption of oxygen by the GOx based layer was evaluated according to principles determined by Michaelis‐Menten kinetics. Apparent Michaelis constants K _{M (app.)} were calculated from the dependencies of current vs glucose concentration. In both these cases the K _{M (app.)} value increased when the distance between ME and enzyme modified surface was increasing from 10 to 30 μm, while the K _{M (app.)} value decreased by increasing the distance from 30 to 60 μm.     

Visualization of the Local Catalytic Activity of Electrodeposited Pt–Ag Catalysts for Oxygen Reduction by means of SECM

Pt–Ag nanoparticle co‐deposits with different Pt–Ag ratios were prepared on a glassy carbon (GC) surface by pulsed electrodeposition and investigated for their catalytic activity in electrocatalytic oxygen reduction by using cyclic voltammetry (CV), rotating disc electrode (RDE) and scanning electrochemical microscopy (SECM) in 0.1 M phosphate buffer (pH 7.0). The atomic composition of the Pt–Ag co‐deposits was studied by means of energy‐dispersive X‐ray analysis (EDAX). In combination with X‐ray diffraction (XRD), the presence of partly alloyed Pt and Ag on the GC surface was confirmed. Scanning electron microscopy (SEM) images indicate that the prepared Pt–Ag catalyst particles are homogenously dispersed over the GC surface. Their size and morphology depend on their composition. The electrocatalytic activity of Pt–Ag deposits with high Pt content was the highest, exceeding even that of electrodeposited Pt as evaluated by quantitative RDE analysis. The redox competition mode of scanning electrochemical microscopy (RC‐SECM) was successfully used to visualize the local catalytic activity of the deposited Pt–Ag particles. Semi‐quantitative assessment of the SECM results confirmed the same order of activity of the different catalysts as the RDE investigations.     

A Carbon Nanotube Layered Electrode for the Construction of the Wired Bilirubin Oxidase Oxygen Cathode

Oxidatively treated carbon nanotubes were coated on a glassy carbon surface to form a CNT‐layer. On the CNT‐layered GC surface, a redox hydrogel film of the copolymer, of polyacryamide and poly(N‐vinylimidazole) complexed with [Os(4,4′‐dichloro‐2,2′‐bipyridine)₂Cl]^+/2+ wiring bilirubin oxidase was immobilized. A good contact was achieved between the hydrogel film and the hydrophilic CNT‐layer with carboxylated CNTs. The prepared bilirubin oxidase cathode on the CNT‐layer was employed for the electrocatalytic reduction of O₂, and enhanced current and stability were observed. Electron transfers from the electrode surface O₂ molecules were analyzed. The optimal composition of the enzyme, redox polymer, and cross‐linker in the catalyst and the thickness of the CNT‐layer were determined.     

Electrochemical monitoring of intracellular enzyme activity of single living mammalian cells by using a double-mediator system

We evaluated the intracellular NAD(P)H:quinone oxidoreductase (NQO) activity of single HeLa cells by using the menadione–ferrocyanide double-mediator system combined with scanning electrochemical microscopy (SECM). The double-mediator system was used to amplify the current response from the intracellular NQO activity and to reduce menadione-induced cell damage. The electron shuttle between the electrode and menadione was mediated by the ferrocyanide/ferricyanide redox couple. Generation of ferrocyanide was observed immediately after the addition of a lower concentration (10 μM) of menadione. The ferrocyanide generation rate was constant for 120 min. At a higher menadione concentration (100 μM), the ferrocyanide generation rate decreased within 30 min because of the cytotoxic effect of menadione. We also investigated the relationship between intracellular reactive oxygen species or glutathione levels and exposure to different menadione concentrations to determine the optimal condition for SECM with minimal invasiveness. The present study clearly demonstrates that SECM is useful for the analysis of intracellular enzymatic activities in single cells with a double-mediator system.     

Electron Transfer between Genetically Modified Hansenula polymorpha Yeast Cells and Electrode Surfaces via Os‐complex modified Redox Polymers

Graphite electrodes modified with redox‐polymer‐entrapped yeast cells were investigated with respect to possible electron‐transfer pathways between cytosolic redox enzymes and the electrode surface. Either wild‐type or genetically modified Hansenula polymorpha yeast cells over‐expressing flavocytochrome b2 (FC b₂) were integrated into Os‐complex modified electrodeposition polymers. Upon increasing the L ‐lactate concentration, an increase in the current was only detected in the case of the genetically modified cells. The overexpression of FC b₂ and the related amplification of the FC b₂/L ‐lactate reaction cycle was found to be necessary to provide sufficient charge to the electron‐exchange network in order to facilitate sufficient electrochemical coupling between the cells, via the redox polymer, to the electrode. The close contact of the Os‐complex modified polymer to the cell wall appeared to be a prerequisite for electrically wiring the cytosolic FC b₂/L ‐lactate redox activity and suggests the critical involvement of a plasma membrane redox system. Insights in the functioning of whole‐cell‐based bioelectrochemical systems have to be considered for the successful design of whole‐cell biosensors or microbial biofuel cells.     

Investigation of Active and Inactivated Yeast Cells by Scanning Electrochemical Impedance Microscopy

Scanning electrochemical microscopy (SECM), electrochemical impedance spectroscopy (EIS) and scanning electrochemical impedance microscopy (SEIM) were used to investigate electrochemical activity of active and inactivated yeast Saccharomyces cerevisiae cells. SEIM experiment was performed using a unique electrochemical impedance spectrometer with a fast Fourier transform (FFT‐EIS) function, which enabled simultaneously perturb/evaluate electrochemical system at 50 frequencies. This allowed very quick observing the differences between impedance spectra, which were taken every few seconds. Therefore, we were able to apply SEIM for relatively fast determination of electrochemical impedance dependence on the distance between ultramicroelectrode (UME) and surface modified by immobilized yeast cells. It was determined that electrochemical activity and ‘breathing’ (a consumption of dissolved oxygen) of yeast can be electrochemically observed when the distance between UME and surface of yeast cells is in the range from 0 μm to 25 μm. Therefore, 25 μm is the maximum distance suitable for efficient investigation of yeast cell activity when experiments are performed in FFT‐SEIM mode. Charge transfer resistance of active and inactivated yeast cells was determined using EIS. It was calculated that charge transfer resistance of active yeast cells is 1.5 times lower than that of inactivated yeast cells. Lipophilic vitamin K₃ (Vit‐K₃) and hydrophilic vitamin K₁ (Vit‐K₁) were mixtured and used as redox mediators for charge transfer from yeast cells.     

Scanning electrochemical microscopy of living cells: Part 2. Imaging redox and acid/basic reactivities

Amperometric feedback and potentiometric modes of the scanning electrochemical microscope (SECM) have been used to image the topography and map redox and acid–base activities in single mammalian cells. The topographic images of cells were obtained using hydrophilic redox mediators, which cannot penetrate the cell membrane. In contrast, with a hydrophobic mediator one can map redox reactivity with a micrometer or submicrometer spatial resolution. The images obtained with oxygen used as a redox mediator show the distribution of the diffusion rate of oxygen in the cell membrane and inside the cell. The acid release by the cell was imaged with a Sb tip in a potentiometric mode, and the possibility of redox and pH imaging of the same cell with same tip is demonstrated. Significant differences were detected in the redox and pH images of normal human breast epithelial cells and metastatic breast cancer cells.     

Electrochemical Investigation of Cytochrome c Immobilized onto Self‐Assembled Monolayer of Captopril

The electrochemical behavior of cytochrome c (cyt‐c) that was electrostatically immobilized onto a self‐assembled monolayer (SAM) of captopril (capt) on a gold electrode has been investigated. Cyclic voltammetry, scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy were employed to evaluate the blocking property of the capt SAM. SECM was used to measure the bimolecular electron transfer (ET) kinetics (k_BI) between a solution‐based redox probe and the immobilized protein. In addition, the tunneling ET between the immobilized protein and the underlying gold electrode was calculated. A k_BI value of (5.0±0.6)×10⁸ mol^?1 cm³ s^?1 for the bimolecular ET and a standard tunneling rate constant (k⁰) of 46.4±0.2 s^?1 for the tunneling ET have been obtained.     

Fabrication of Chitosan‐Multiwall Carbon Nanotube Nanocomposite Containing Ferri/Ferrocyanide: Application for Simultaneous Detection of D‐Penicillamine and Tryptophan

We report a simple and effective strategy for fabrication of the nanocomposite containing chitosan (CS) and multiwall carbon nanotube (MWNT) coated on a glassy carbon electrode (GCE). The characterization of the modified electrode (CS‐MWNT/GC) was carried out using scanning electron microscopy (SEM) and UV–vis absorption spectroscopy. The electrochemical behavior of CS‐MWNT/GC electrode was investigated and compared with the electrochemical behavior of chitosan modified GC (CS/GC), multiwalled carbon nanotube modified GC (MWNT/GC) and unmodified GC using cyclic voltammetry (CV) and electron impedance spectroscopy (EIS). The chitosan films are electrochemically inactive; similar background charging currents are observed at bare GC. The chitosan films are permeable to anionic Fe(CN)₆^3?/4? (FC) redox couple. Electrochemical parameters, including apparent diffusion coefficient for the Fe(CN)₆^3?/4? redox probe at FC/CS‐MWNT/GC electrode is comparable to values reported for cast chitosan films. This modified electrode also showed electrocatalytic effect for the simultaneous determination of D‐penicillamine (D‐PA) and tryptophan (Trp). The detection limit of 0.9 μM and 4.0 μM for D‐PA and Trp, respectively, makes this nanocomposite very suitable for determination of them with good sensitivity.     

Impacts of Forced Convection Generated via High Precision Stirring on Scanning Electrochemical Microscopy Experiments in Feedback Mode

In this study, the effects of forced convection on scanning electrochemical microscopy (SECM) experiments in feedback mode using ferrocenemethanol as redox mediator are presented. Forced convection, which enhances the mass transfer inside the system, was generated via an electrical high precision stirrer integrated into the SECM setup. A thin‐film interdigitated array electrode serving as model substrate was investigated with probe scan curves in z‐direction and SECM imaging in constant height mode utilizing ultramicroelectrodes (UME) with diameters (d_probe) of 25 μm and 12.5 μm. It was found that forced convection increased the overall current during SECM imaging without distorting distinctive features of the imaged structure when working with a 25 μm UME at substrate‐to‐tip distances of 14 μm and 11 μm. Furthermore, the electrochemical contrast was improved under hydrodynamic conditions for a substrate‐to‐tip distance of 11 μm and scan rates of 5 μm s^?1, 10 μm s^?1, 20 μm s^?1 and 40 μm s^?1. When further decreasing the gap between the UME and the substrate to 9 μm almost no effects of the forced convection were observed. Consequently, for a 25 μm UME, forced convection led to higher currents and improved performance during SECM experiments in feedback mode at substrate‐to‐tip distances of 14 μm and 11 μm, whereas no effects were observed for a 12.5 μm UME at a distance of 8 μm.     

Electrochemical study of glassy carbon electrodes modified with zirconium phosphate and some azine-type redox dyes

Glassy carbon (GC) electrodes were modified with a layer of zirconium phosphate (ZrP), using either direct chemical synthesis onto the surface or a ZrP gel droplet evaporation procedure. The azine-type dyes nile blue A (NB) and toluidine blue O (TB) were immobilized onto the ZrP-modified GC electrodes either by adsorption onto just the formed layer of ZrP or by inclusion into the ZrP matrix during its chemical synthesis. The electrochemical behavior of the GC·ZrP·dye composite electrodes was studied. For GC·ZrP-modified electrodes prepared by chemical synthesis on the surface, coverage by NB or TB of one or a few monolayers was found, with E _m values for these redox couples slightly shifting by ca. 0.05 V to the negative direction. For the GC·ZrP electrodes prepared by gel droplet evaporation, the E _m values for NB and TB appear initially shifted by ca. 0.2 V to the positive direction; however, both cathodic and anodic peaks return to their usual positions on the potential scale during soaking these electrodes in a buffer solution. Electronic Publication     

Fabrication and Use of Dual‐function Iridium Oxide Coated Gold SECM Tips. An Application to pH Monitoring above a Copper Electrode Surface during Nitrate Reduction.

The fabrication of a gold microelectrode modified with iridium oxide film (IrO_x) and its use as tip with a dual function in SECM experiments is reported. The defective structure of the coating onto the microelectrode surface was used as strategy to combine the advantages of both amperometric (for current‐distance determination) and potentiometric (for pH sensing) SECM operation modes. Approach curves, using oxygen and hexaammineruthenium(III) as redox mediators, were obtained without significant loss of the performance and reproducibility of the potentiometric pH response. This allowed the precise positioning of the proposed tip above a substrate in SECM experiments and, subsequently, to monitor pH at the substrate surface. The IrO_x modified microelectrode was applied successfully in SECM experiments involving the local proton consumption during the nitrate reduction at a copper cathode surface.     

Detection and Quantification of Sulfonamide Antibiotic Residues in Milk Using Scanning Electrochemical Microscopy

The use of scanning electrochemical microscopy (SECM) for the qualitative and quantitative determination of sulfapyridine (SPY) in milk is described. A direct competitive immunoassay was performed involving an antibiotic horseradish peroxidase (HRP)‐labeled analog and using selective capture antibodies immobilized on the surface of Protein G‐modified glassy carbon plates. SECM detection was accomplished by means of the sample generator/tip collector (GC) mode involving the reduction of benzoquinone (BQ) generated upon the HRP‐catalyzed oxidation of hydroquinone (HQ) at the modified substrate surface in the presence of H₂O₂. The detection limit for SPY in milk samples was as low as 0.13 ng mL^?1.     

Scanning Electrochemical Microscopy (SECM) Based Detection of Oligonucleotide Hybridization and Simultaneous Determination of the Surface Concentration of Immobilized Oligonucleotides on Gold

The direct mode of scanning electrochemical microscopy (SECM) was used for the local deposition of oligonucleotide (ODN) patterns on thin gold films and the generation‐collection (GC) mode was applied for the determining the amount of surface‐accessible oligonucleotides. The local deposition was achieved through the micrometer‐sized formation of a conducting polymer bearing 15^mer single‐stranded oligonucleotide strands. After the interaction of the oligonucleotide with its biotin‐labeled complimentary strand, streptavidin was bound. The molecular assembly was completed by linking biotin‐labeled β‐galactosidase from Escherichia coli to the streptavidin. The activity of the linked β‐galactosidase was mapped with SECM in the GC mode by monitoring the oxidation of p‐aminophenol (PAP) formed in the enzyme‐catalyzed hydrolysis of p‐aminophenyl‐β‐D ‐galactopyranoside. The feedback effect due to recycling of the reaction product at the gold surface was analyzed. It was shown experimentally that this effect becomes insignificant at ultramicroelectrode (UME)‐substrate distances larger than 3 UME radii. The flux of formed PAP allowed the determination the surface density of accessible oligonucleotide strands in the functionalized polymer. It was shown that that thicker pyrrole/ODN–Pyrrole polymer films do not lead to a significantly increased accessible ODN surface concentration.     

Sensitive Phenol Detection Using Tyrosinase‐Based Phenol Oxidation Combined with Redox Cycling of Catechol

This paper reports sensitive phenol detection using (i) tyrosinase (Tyr)‐based oxidation of phenol to catechol, combined with (ii) electrochemical‐chemical‐chemical (ECC) redox cycling involving Ru(NH₃)₆³⁺, catechol, and tris(2‐carboxyethyl)phosphine (TCEP). Phenol is converted into catechol by Tyr in the presence of dissolved O₂. Catechol then reacts with Ru(NH₃)₆³⁺, generating o‐benzoquinone and Ru(NH₃)₆²⁺. o‐Benzoquinone is reduced back to catechol by TCEP, and Ru(NH₃)₆²⁺ is accumulated over the course of the incubation. When Ru(NH₃)₆²⁺ is electrochemically oxidized to Ru(NH₃)₆³⁺, ECC redox cycling occurs. For simple phenol detection, bare ITO electrodes are used without modifying the electrodes with Tyr. The detection limit for phenol in tap water using Tyr‐based oxidation combined with ECC redox cycling is ca. 10^?9 M, while that using only Tyr‐based oxidation is ca. 10^?7 M.     

Antigenotoxic Effect Against Ultraviolet Radiation‐induced DNA Damage of the Essential Oils from Lippia Species

The antigenotoxicity against ultraviolet radiation (UV)‐induced DNA damage of essential oils (EO) from Lippia species was studied using SOS Chromotest. Based on the minimum concentration that significantly inhibits genotoxicity, the genoprotective potential of EO from highest to lowest was Lippia graveolens, thymol‐RC ≈ Lippia origanoides, carvacrol‐RC ≈ L. origanoides, thymol‐RC > Lippia alba, citral‐RC ≈ Lippia citriodora, citral‐RC ≈ Lippia micromera, thymol‐RC > L. alba, myrcenone‐RC. EO from L. alba, carvone/limonene‐RC, L. origanoides, α‐phellandrene‐RC and L. dulcis, trans‐β‐caryophyllene‐RC did not reduce the UV genotoxicity at any of the doses tested. A gas chromatography with flame ionization detection analysis (GC‐FID) was conducted to evaluate the solubility of the major EO constituents under our experimental conditions. GC‐FID analysis showed that, at least partially, major EO constituents were water‐soluble and therefore, they were related with the antigenotoxicity detected for EO. Constituents such as p‐cymene, geraniol, carvacrol, thymol, citral and 1,8‐cineole showed antigenotoxicity. The antioxidant activity of EO constituents was also determined using the oxygen radical antioxidant capacity (ORAC) assay. The results showed that the antigenotoxicity of the EO constituents was unconnected with their antioxidant activity. The antigenotoxicity to different constituent binary mixtures suggests that synergistic effects can occur in some of the studied EO.     

Specific and Rapid Glucose Detection Using NAD‐dependent Glucose Dehydrogenase,Diaphorase, and Osmium Complex

Selective glucose measurement in serum and blood and rapid glucose measurement using nicotinamide adenine dinucleotide (NAD)‐dependent glucose dehydrogenase (NAD‐GDH) are still very challenging. Here, we report a selective and rapid glucose sensor, based on electrochemical‐enzymatic‐enzymatic (ENN) redox cycling involving bis(2,2‐bipyridyl)dichloroosmium(II) [Os(bpy)₂Cl₂], diaphorase (DI), NAD⁺, NAD‐GDH, and glucose. DI and Os(bpy)₂Cl₂ are used to obtain fast mediated oxidation of NADH that is generated as a result of glucose oxidation by NAD‐GDH. DI and NAD‐GDH are co‐immobilized via affinity binding on an avidin‐modified indium tin oxide electrode to obtain fast and stable ENN redox cycling. Two enzymes (DI and NAD‐GDH) and two electron mediators [Os(bpy)₂Cl₂ and NAD⁺] are insensitive to oxygen. The applied potential (0.0 V vs Ag/AgCl) is low enough to minimize interfering electrochemical reactions, and the redox reactions of Os(bpy)₂Cl₂ with interfering species are slow. NAD‐GDH is much less reactive to problematic monosaccharides such as xylose, fructose, galactose, and mannose than glucose. Artificial serum containing 5 % (w/v) human serum albumin shows a similar electrochemical background level in serum. All results enable us to obtain selective and reproducible glucose detection. The fast ENN redox cycling allows sensitive glucose detection with a wide range of concentrations in artificial serum with a short measuring time (5 s) without an incubation period.     

Filming a live cell by scanning electrochemical microscopy: label-free imaging of the dynamic morphology in real time

ABSTRACT: The morphology of a live cell reflects the organization of the cytoskeleton and the healthy status of the cell. We established a label-free platform for monitoring the changing morphology of live cells in real time based on scanning electrochemical microscopy (SECM). The dynamic morphology of a live human bladder cancer cell (T24) was revealed by time-lapse SECM with dissolved oxygen in the medium solution as the redox mediator. Detailed local movements of cell membrane were presented by time-lapse cross section lines extracted from time-lapse SECM. Vivid dynamic morphology is presented by a movie made of time-lapse SECM images. The morphological change of the T24 cell by non-physiological temperature is in consistence with the morphological feature of early apoptosis. To obtain dynamic cellular morphology with other methods is difficult. The non-invasive nature of SECM combined with high resolution realized filming the movements of live cells.     

Electrochemical Treatment of Glassy Carbon for Label‐Free Detection of DNA Bases and Neurotransmitters

Electrochemically reduced glassy carbon (r‐GC) showed a superior electrochemical sensing performance, compared to oxidized GC (ox‐GC) and untreated GC for the oxidation of 4 DNA bases and neurotransmitters (epinephrine, norepinephrine and serotonin). r‐GC exhibited not only the largest current intensities of all redox biomolecules, but also displayed an excellent selectivity in detecting coexisting redox biomolecules. The enhanced performance of r‐GC was attributed to the improved surface cleanliness of electrode and its catalytic surface functional groups. The results presented herein imply that simple electrochemical treatments are a viable method to produce sensitive and selective electrodes for label‐free biosensing.