石英晶体板非线性高频振动的拓展伽辽金法分析

针对考虑几何和材料非线性的石英晶体板厚度剪切振动和弯曲振动的方程组,利用扩展伽辽金法对该方程组进行转化和求解,分别获得了强烈耦合的厚度剪切振动模态和弯曲振动模态的频率响应关系,绘制了不同振幅比和不同驱动电压影响下的频率响应曲线图。数值计算结果表明可以选取石英晶片的最佳长厚比尺寸来避免两种模态的强烈耦合。驱动电压的变化将引起石英晶体谐振器厚度剪切振动频率的明显改变,必须将振动频率的漂移值控制在常用压电声波器件的允许值之内。扩展伽辽金法对石英晶体板非线性振动方程组的求解为非线性有限元分析和偏场效应分析奠定了基础。     

CdS/Si nanofilm heterojunctions based on amorphous silicon films:Fabrication,structures,and electrical properties

Shortening the distance between the depletion region and the electrodes to reduce the trapped probability of carriers is a useful approach for improving the performance of heterojunction.The CdS/Si nanofilm heterojunctions are fabricated by using the radio frequency magnetron sputtering method to deposit the amorphous silicon nanofilms and Cd S nanofilms on the ITO glass in turn.The relation of current density to applied voltage(I-V)shows the obvious rectification effect.From the analysis of the double logarithm I-V curve it follows that below~2.73 V the electron behaviors obey the Ohmic mechanism and above~2.73 V the electron behaviors conform to the space charge limited current(SCLC)mechanism.In the SCLC region part of the traps between the Fermi level and conduction band are occupied,and with the increase of voltage most of the traps are occupied.It is believed that Cd S/Si nanofilm heterojunction is a potential candidate in the field of nano electronic and optoelectronic devices by optimizing its fabricating procedure.     

Development of Lysosome-Targeted Fluorescent Probes for Cys by Regulating the Boron-dipyrromethene (BODIPY) Molecular Structure

Our previous discovery suggested that substituents on the 1,7 positions delicately modulate the sensing ability of the meso-arylmercapto boron-dipyrromethene (BODIPY) to biothiols. In this work, the impact of delicate modulations on the sensing ability is investigated. Therefore, 1,7-dimethyl, 3,5-diaryl substituted BODIPY is designed and developed and its conformationally restricted species with a meso-arylmercapto moiety ( DM-BDP-SAr and DM-BDP-R-SAr ) as selective fluorescent probes for Cys. Moreover, the lysosome-target probes ( Lyso-S and Lyso-D ) based on DM-BDP-SAr carrying one or two morpholinoethoxy moieties were developed. They were able to detect Cys selectively in vitro with low detection limits. Both Lyso-S and Lyso-D localized nicely in lysosomes in living HeLa cells and exhibited red fluorescence for Cys. Moreover, a novel fluorescence quenching mechanism was proposed from the calculations by density functional theory (DFT). The probes may go through intersystem crossing (from singlet excited state to triplet excited state) to result in fluorescence quenching.     

Polymer nanoparticles with a sensitive CO2‐responsive hydrophilic/hydrophobic surface

Poly(methyl methacrylate) (PMMA) nanoparticles with a sensitive CO₂‐responsive hydrophilic/hydrophobic surface that confers controlled dispersion and aggregation in water were prepared by emulsion polymerization at 50 °C under CO₂ bubbling using amphiphilic diblock copolymers of 2‐dimethylaminoethyl methacrylate (DMAEMA) and N‐isopropyl acrylamide (NIPAAm) as an emulsifier. The amphiphilicity of the hydrophobic–hydrophilic diblock copolymer at 50 °C was triggered by CO₂ bubbling in water and enabled the copolymer to serve as an emulsifier. The resulting PMMA nanoparticles were spherical, approximately 100 nm in diameter and exhibited sensitive CO₂/N₂‐responsive dispersion/aggregation in water. Using copolymers with a longer PNIPAAm block length as an emulsifier resulted in smaller particles. A higher concentration of copolymer emulsifier led to particles with a stickier surface. Given its simple preparation and reversible CO₂‐triggered amphiphilic behavior, this newly developed block copolymer emulsifier offers a highly efficient route toward the fabrication of sensitive CO₂‐stimuli responsive polymeric nanoparticle dispersions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2149–2156     

Preparation and Characterization of a π-Conjugated Donor–Acceptor System Containing the Strongly Electron-Accepting Tetraphenylborolyl Unit

A novel thiophene-bridged donor–acceptor system was synthesized with a carbazole as donor and a borole as acceptor unit. The borole group was successfully installed via the tin–boron exchange reaction of 1,1-dimethyl-2,3,4,5-tetraphenylstannole with 9-(5-(dibromoboryl)thiophen-2-yl)carbazole. The effect of the borole on the optoelectronic properties of the donor–acceptor system was explored by spectroscopic (UV/Vis and fluorescence spectroscopy), electrochemical (cyclic voltammetry) and theoretical (TD-DFT) methods as well as by modifying its structure. The corresponding donor–acceptor compound bearing the widely employed dimesitylboryl acceptor group was also synthesized for comparison.     

Investigation of mononuclear,dinuclear, and trinuclear transition metal (II) complexes derived from an asymmetric Salamo‐based ligand possessing three different coordination modes

A new asymmetric Salamo‐based ligand H₂L was synthesized using 3‐tert‐butyl‐salicylaldehyde and 6‐methoxy‐2‐[O‐(1‐ethyloxyamide)]‐oxime‐1‐phenol. By adjusting the ratio of the ligand H₂L and Cu (II), Co (II), and Ni (II) ions, mononuclear, dinuclear, and trinuclear transition metal (II) complexes, [Cu(L)], [{Co(L)}₂], and [{Ni(L)(CH₃COO)(CH₃CH₂OH)}₂Ni] with the ligand H₂L possessing completely different coordination modes were obtained, respectively. The optical spectra of ligand H₂L and its Cu (II), Co (II) and Ni (II) complexes were investigated. The Cu (II) complex is a mononuclear structure, and the Cu (II) atom is tetracoordinated to form a planar quadrilateral structure. The Co (II) complex is dinuclear, and the two Co (II) atoms are pentacoordinated and have coordination geometries of distorted triangular bipyramid. The Ni (II) complex is a trinuclear structure, and the terminal and central Ni (II) atoms are all hexacoordinated, forming distorted octahedral geometries. Furthermore, optical properties including UV–Vis, IR, and fluorescence of the Cu (II), Co (II), and Ni (II) complexes were investigated. Finally, the antibacterial activities of the Cu (II), Co (II), and Ni (II) complexes were explored. According to the experimental results, the inhibitory effect was found to be enhanced with increasing concentrations of the Cu (II), Co (II), and Ni (II) complexes.     

The h-SbxWO3+2x Oxygen Excess Antimony Tungsten Bronze

We describe the previously unreported oxygen excess hexagonal antimony tungsten bronze with composition Sb_0.5W₃O₁₀, in the following denoted as h-Sb_xWO_3+2x with x=0.167, to demonstrate its analogy to classical A_xWO₃ tungsten bronzes. This compound forms in a relatively narrow temperature range between 580 °C<T<620 °C. It was obtained as a dark-blue polycrystalline powder, and as thin, needle-shaped, blue single crystals. h-Sb_xWO_3+2x crystallizes in the hexagonal space group P6/mmm with the cell parameters a=7.4369(4) Å and c=3.7800(2) Å. The antimony and excess oxygen occupy the hexagonal channels within the network of corner-sharing WO₆ octahedra. h-Sb_xWO_3+2x has a resistivity of ρ_{300 K}≈1.28 mΩ cm at room temperature, with little if any temperature-dependence on cooling. DFT calculations on a simplified model for this compound find a metallic-like electronic structure with the Fermi level falling within rather flat bands, especially around the Γ point.     

Hexanuclear 3d − 4f metal–organic cages assembled from a carboxylic acid‐functionalized tris‐triazamacrocycle for highly selective fluorescent sensing of picric acid

Two Ln^III ions are sandwiched by dinuclear Co^II building blocks derived from a tris‐triazamacrocyclic ligand bearing pendant carboxylic acid functionality, 1,3,5‐tris((4,7‐bis(2‐carboxyethyl)‐1,4,7‐triazacyclonon‐1‐yl)methyl)‐benzene (H₆L), giving rising to two nanoscale heterometallic metal–organic cages formulated as [Co₄Ln₂(LH_2.5)₂(H₂O)₄]·(ClO₄)₆·NO₃·nH₂O [Ln = Dy, n = 12 ( 1 ); Ln = Yb, n = 9 ( 2 )], whose internal cavity accommodates a guest NO₃^? anion. Their hexanuclear cage‐like architectures are maintained both in solution and solid states as confirmed by mass spectrum as well as X‐ray diffraction experiments. These two cages display ligand‐based fluorescence emissions and therefore both were chosen to be operated as fluorescent chemosensors for the detection of nitroaromatic compounds. Attractively, these metal–organic cages allow highly selective and sensitive detection of picric acid (PA) over other nitroaromatics in solution and suspension, and the fluorescence resonance energy transfer (FRET) between the cage probes and PA is mainly responsible for the remarkable detection efficiency.     

Two weight commutators in the Dirichlet and Neumann Laplacian settings

In this paper we establish the characterization of the weighted BMO via two weight commutators in the settings of the Neumann Laplacian ${\mathrm{\Delta }}_{N_{+}}$ on the upper half space ${\mathbb{R}}_{+}^n$ and the reflection Neumann Laplacian ${\mathrm{\Delta }}_N$ on ${\mathbb{R}}^n$ with respect to the weights associated to ${\mathrm{\Delta }}_{N_{+}}$ and ${\mathrm{\Delta }}_N$ respectively. This in turn yields a weak factorization for the corresponding weighted Hardy spaces, where in particular, the weighted class associated to ${\mathrm{\Delta }}_N$ is strictly larger than the Muckenhoupt weighted class and contains non-doubling weights. In our study, we also make contributions to the classical Muckenhoupt–Wheeden weighted Hardy space (BMO space respectively) by showing that it can be characterized via the area function (Carleson measure respectively) involving the semigroup generated by the Laplacian on ${\mathbb{R}}^n$ and that the duality of these weighted Hardy and BMO spaces holds for Muckenhoupt $A^p$ weights with $p\in (1,2]$ while the previously known related results cover only $p\in (1,\frac{n+1}{n}]$. We also point out that this two weight commutator theorem might not be true in the setting of general operators L, and in particular we show that it is not true when L is the Dirichlet Laplacian ${\mathrm{\Delta }}_{D_{+}}$ on ${\mathbb{R}}_{+}^n$.