Microwave digestion and matrix separation for the determination of cadmium in urine samples by electrothermal atomization atomic absorption spectrometry using a fast temperature program

 A method is proposed which involves sample pretreatment followed by electrothermal atomic absorption spectrometry (ETAAS) for determination of cadmium in human urine. A microwave digestion system was devised to accommodate double-closed vessels for simultaneous digestion of batches of up to 24 urine samples in about 20 min. After digestion, matrix substances which might interfere were removed using silica-immobilized 8-hydroxyquinoline (I-8HOQ) columns. The analyte adsorbed on the column was then eluted with dilute nitric acid solution and determined by ETAAS using a fast temperature program. Neither ashing steps in the furnace heating program nor use of matrix modifiers was necessary. The accuracy, precision, limit of detection, and sample throughput of the method were evaluated. With meticulous control of systematic errors which may be introduced in the pretreatment procedures, the present method can serve as a reference technique for the analysis of Cd in urine samples. Received: 29 July 1996/Revised: 30 September 1996/Accepted: 13 October 1996     

Microwave digestion and matrix separation for the determination of cadmium in urine samples by electrothermal atomization atomic absorption spectrometry using a fast temperature program

 A method is proposed which involves sample pretreatment followed by electrothermal atomic absorption spectrometry (ETAAS) for determination of cadmium in human urine. A microwave digestion system was devised to accommodate double-closed vessels for simultaneous digestion of batches of up to 24 urine samples in about 20 min. After digestion, matrix substances which might interfere were removed using silica-immobilized 8-hydroxyquinoline (I-8HOQ) columns. The analyte adsorbed on the column was then eluted with dilute nitric acid solution and determined by ETAAS using a fast temperature program. Neither ashing steps in the furnace heating program nor use of matrix modifiers was necessary. The accuracy, precision, limit of detection, and sample throughput of the method were evaluated. With meticulous control of systematic errors which may be introduced in the pretreatment procedures, the present method can serve as a reference technique for the analysis of Cd in urine samples. Received: 29 July 1996/Revised: 30 September 1996/Accepted: 13 October 1996     

Syntheses of double- and triple-decker clusters of osmium and cobalt metals linked by cyclotetradeca-1,8-diyne ligands

Photoirradiation of Os₃(CO)₁₀(C₁₄H₂₀) (1) in n-hexane produces the double-decker cluster [Os₃(CO)₉(C₂₈H₄₀)] [Os₃(CO)₁₀] (7), which can also be prepared from the reaction of Os₃(CO)₉(C₂₈H₄₀) (2) and Os₃(CO)₁₀(NCMe)₂. Further reaction of 7 with Os₃(CO)₁₀(NCMe)₂ affords the triple-decker cluster [Os₃(CO)₉(C₂₈H₄₀)][Os₃(CO)₁₀]₂ (8). The bis(diyne) complex Os₃(CO)₈(C₁₄H₂₀)₂ (3) reacts with Os₃(CO)₁₀(NCMe)₂ sequentially to yield the double-decker cluster [Os₃(CO)₈(C₁₄H₂₀)₂][Os₃(CO)₁₀] (4) and the triple-decker cluster [Os₃(CO)₈(C₁₄H₂₀)₂][Os₃(CO)₁₀]₂ (5). Treatment of 3 with Co₂(CO)₈ at room temperature leads to the mixed-metal triple-decker cluster [Os₃(CO)₈(C₁₄H₂₀)₂][Co₂(CO)₆]₂ (6), while the reaction of 2 and Co₂(CO)₈ produces [Os₃(CO)₉(C₂₈H₄₀)][Co₂(CO)₆]₂ (9) and [Os₂(CO)₆(C₂₈H₄₀)][Co₂(CO)₆]₂ (10). Compound 10, which involves cluster degradation from Os₃ to Os₂, has been structurally characterized by an X-ray diffraction study.     

Mass Spectra of N-Arylglycines and Substituted Aniline-N,N-Diacetic Acids

The electron impact mass spectra of eleven N-arylglycines and seven substituted aniline-N,N-diacetic acids were obtained under 70 eV and 14 eV ionization energies. The fragmentation patterns are similar to those of α-amino acids except for the degree of cleavage. The dehydration process of the diacetic acids may be considered as the characterestic process for this group of compounds.     

The Chemical Constituents of the Wood of Pinus Luchuensis Mayer

From the hexane extractive of the wood of Pinus luchuensis Mayer, α-pinene, β-pinene, camphene, camphor, 4-terpineol, α-terpineol, carvacrol, tetracosanol, hexacosanol, octacosanol, β-sitosterol, stigmasterol, methyl dehydroabietate, pinosylvin monomethylether, pimaric acid, dehydroabietic acid and straight chain hydrocarbons C₂₃-C₃₅ were isolated.     

Deposition and electrostatic removal of gaseous organic contaminants on substrate surfaces

The adhesion behavior of di-n-butyl phthalate (DBP) onto different substrates (quartz, glass, and silicon) used as wafer surfaces was studied by using an in situ UV spectrophotometric technique. The results from the closed cell experiments revealed that greatest extent of DBP adhesion occurred on the quartz chip (0.154 μg cm⁻²), followed in the order by the glass (0.054 μg cm⁻²) and silicon (0.039 μg cm⁻²). By means of the in situ spectrophotometric observation, application of an electrical field at 290 V cm⁻¹ in the cell proved to be effective in inducing charging of DBP aerosols, which were consequently attracted towards the electrodes. This method can be applied to wafer storage and transport equipments to prevent wafer contamination from material outgassing representative by DBP.     

Solvent‐induced crystallization in poly(ethylene terephthalate) during mass transport

Solvent transport in poly(ethylene terephthalate) (PET) and related phase transformation were investigated. The data of mass sorption were analyzed according to Harmon's model for Case I (Fickian), Case II (swelling), and anomalous transport. This transport process in PET is accompanied by the induced crystallization of the original amorphous state. The transformation was examined by wide‐angle X‐ray scattering, small‐angle X‐ray scattering, differential scanning calorimetry, and Fourier transform infrared spectroscopy. During this process, the matrix is under a strain state that causes different kinetic paths of crystallization as compared with that by thermal annealing. This state of strain assists the development of the solvent‐induced crystallization. The model regarding crystallization was proposed in terms of the study of long period L, the crystal thickness l_c, and the thickness of amorphous layer l_a obtained from the one‐dimensional correlation function and interface distribution function. Different kinetic paths were discovered for different crystallization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1444–1453, 2002     

Quadruple systems of the projective special linear group PSL(2,q), q ≡ 1 (mod 4)

We determine the distribution of quadruple systems among the orbits of 4‐element subsets under the action of PSL(2,q) on the projective line when q ≡ 1 (mod 4). © 2003 Wiley Periodicals, Inc. J Combin Designs 11: 339–351, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/jcd.10043     

The Design of Hermetically Double-Coated Optical Fibers to Minimize Hydrostatic Pressure-Induced Stresses

The design of hermetically double-coated optical fibers to minimize hydrostatic pressure-induced stresses is investigated. Several stresses are important in the hermetically double-coated optical fibers, and they would produce the excess bending losses or the failure of hermetic coatings. These stresses can be minimized by appropriately selecting material's properties of hermetic coatings and their thicknesses. The hydrostatic pressure-induced stresses in optical fibers with some selected metallic coatings are also considered. The results show that chromium has the best performance in the minimization of hydrostatic pressure-induced stresses. However, lead and indium are poor materials.