Semiquantitative Analysis of Biological Materials by Inductively Coupled Plasma–Mass Spectrometry

Semiquantitative analysis with accuracy of ±30 to 50% is a valuable tool for rapid screening of samples prior to quantitative determination of trace metals. In this study semiquantitative analysis software available with commercial inductively coupled plasma–mass spectrometry (ICP-MS) instrumentation is applied for rapid multielemental analysis, and the accuracy and precision of this semiquantitative analysis approach is evaluated with biological certified reference materials. Samples were prepared by high-pressure, high-temperature nitric acid vapor-phase digestion. For most elements the measured semiquantitative results are in the range of the certified values. With appropriate analyte solution dilution, the measured concentrations of the major elements (e.g., Ca) also agree with certified values. The accuracy is within ±10% for 28 element determinations that include 16 individual elements (Ag, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Rb, Sb, Sr, Tl, and Zn) and ±20% for 54 element determinations that include three more elements (Mg, V, and U) in eight certified reference materials including water. The method precision is 11 ± 11% (relative standard deviation,n= 65).     

Application of laser ablation–inductively coupled plasma-mass spectrometry (LA–ICP–MS) to investigate trace metal spatial distributions in human tooth enamel and dentine growth layers and pulp

Human tooth enamel provides a nearly permanent and chronological record of an individuals nutritional status and anthropogenic trace metal exposure during development; it might thus provide an excellent bio archive. We investigated the micro-spatial distribution of trace metals (Cu, Fe, Mg, Sr, Pb, and Zn) in 196×339 m² raster pattern areas (6.6×10⁴ m²) in a deciduous tooth using laser ablation-inductively coupled plasma-mass spectrometry (LA–ICP–MS). Ablated areas include prenatal and postnatal enamel, the neonatal line, the dentine–enamel junction (DEJ), dentine, and the dentine–pulp junction. Topographic variations in the surface elemental distribution of lead, zinc, strontium, and iron intensities in a deciduous tooth revealed heterogeneous distribution within and among regions. ⁴³Ca normalized elemental intensities showed the following order: Sr>Mg>>Zn>Pb>Fe>Cu. Elevated zinc and lead levels were present in the dental pulp region and at the neonatal line. This study demonstrates the ability of LA–ICP–MS to provide unique elemental distribution information in micro spatial areas of dental hard tissues. Elemental distribution plots could be useful in decoding nutrition and pollution information embedded in their bio apatite structure.Presented in part at the 2002 Winter Conference on Plasma Spectrochemistry, Scottsdale, AZ, January 6–12, 2002. The poster was selected as an outstanding poster presentation.     

Determination of some trace elements in human tooth enamel

Determination of seven elements (Cu, Fe, Mg, Mn, Pb, Sr and Zn) in whole enamel and surface layers of extracted non-carious human teeth by FAAS, ETA AAS, ICP-AES and ICP-MS (Pb) is demonstrated. Techniques are described for obtaining whole enamel and its acid dissolution. Fifty microm width enamel layers from outer enamel surface to a 200 microm depth were successively etched in 1 mL of 3 M HClO4 for 3 min dissolution periods. Enamel samples were analyzed for populations under and over 20 years of age and enamel from Bronze Age teeth. Concentrations of microelements in the whole enamel and in the first surface layer (50 microm depth) were compared. With exception of Sr and Mg, all elements show significantly higher concentrations in the first layer than in whole enamel and higher concentration in teeth of individuals over 20 years, which demonstrate the cumulative effect of these elements. The Cu, Fe, Mn, Pb and Zn concentrations in four layers of erupted and non-erupted teeth decreased while Mg and Sr concentrations increased toward enamel-dentine junction. The concentrations of most elements were almost constant as they approached the 150 microm layer. This concentration gradient may result from interaction between saliva and teeth and supports the hypothesis that the surface de- and re-mineralization process is effective at most to 150 microm from the enamel surface.     

Determination of lead concentration and lead isotope ratios in calcium supplements by inductively coupled plasma mass spectrometry after high pressure, high temperature digestion

The presence of lead as a contaminant in calcium supplements has aroused considerable public health interest in recent years. In this investigation lead and lead isotope ratios were determined by ICP-MS in ten brands of calcium supplements after high pressure/temperature digestion. Calcium supplements (200 to 250 mg) were digested in 2 mL of nitric acid at 230?°C and at a pressure of 1770 psi (1.2 × 10⁴ kPa). Lead concentrations were determined by matrix-matched lead standards prepared in a high-purity calcium carbonate matrix. Good recoveries of lead and calcium were obtained for certified animal bone reference material. High levels of Pb (8 to 28 μg Pb per g of calcium) were found in calcium supplements that contain dolomite or bone meal. Chelated and refined calcium supplements had lower Pb levels (0.8 to 0.9 μg Pb/g Ca). Application of lead isotope ratios to distinguish the origin of calcium sources was also explored.     

Optimal echo spacing for multi-echo imaging measurements of Bi-exponential T2 relaxation

Calculations, analytical solutions, and simulations were used to investigate the trade-off of echo spacing and receiver bandwidth for the characterization of bi-exponential transverse relaxation using a multi-echo imaging pulse sequence. The Cramer–Rao lower bound of the standard deviation of the four parameters of a two-pool model was computed for a wide range of component T₂ values and echo spacing. The results demonstrate that optimal echo spacing (TE_opt) is not generally the minimal available given other pulse sequence constraints. The TE_opt increases with increasing value of the short T₂ time constant and decreases as the ratio of the long and short time constant decreases. A simple model of TE_opt as a function of the two T₂ time constants and four empirically derived scalars is presented.     

Exploring lead exposure in ancient Chilean mummies using a single strand of hair by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS)

Lead exposure has received increased attention over the past few decades since it has been shown to have adverse effects on physical and intellectual development in humans. The use of biological tissues such as blood, teeth, hair, and bone for assessment of lead exposure has been previously demonstrated. While analysis of blood for trace metals provides information concerning recent exposure, hair offers insight into a period of several months, and is preferable since it is non-invasively collected and easily stored. The present study analyzed total of 49 ancient hair samples for lead (Pb_H) using LA-ICP-MS. Samples belonged to an ancient fisher hunter–gatherer culture called the “Chinchorro,” and who occupied regions of the Atacama Desert on the northern coast of Chile from approximately 5000–1500 B.C. and practiced the first-known form of artificial mummification. Several samples from a post-Chinchorro agricultural community (n = 12) ca. 1000–1400 A.D. were also analyzed. A suite of hair standards was developed using contemporary hair from the same region and was subsequently used to make linear calibration functions for lead determination in single strands of hair using LA-ICP-MS. Three linear scans ranged from 500 to 1000 μm were performed for each sample and signal intensities were normalized over ¹³C. The distribution of lead in the central medulla in a 100 μm cross-section scan of hair strand demonstrated minimal exogenous contamination. Hair lead (Pb_H) concentrations ranged between 2.2 μg/g and 12.8 μg/g could be accurately quantified with these standards. Twenty one out of 49 samples (43%) showed Pb_H concentrations higher than the average value of 5 μg/g for unexposed individuals (range 1.1–228.0 μg/g). Median hair lead concentrations by burial sites and are shown in order of decreasing concentration: Morro (13.8 μg/g) > Iquique (6.6 μg/g) > Azapa (4.5 μg/g) > Yungay (4.1 μg/g) > Camarones (2.7 μg/g). Most of the burial sites showed Pb_H concentrations greater than the normal value for unexposed individuals and outliers heavily influenced average concentrations. The results suggest that the Chinchorro and later agro-pastoral populations were not widely exposed to naturally elevated lead.     

Characterization of lead and lead leaching properties of lead glazed ceramics from the Solis Valley, Mexico, using inductively coupled plasma-mass spectrometry (ICP-MS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFT)

Ingestion of relatively small amounts of lead is now recognized to cause significant neurological and cognitive effects in humans. Large quantities may be fatal, yet lead poisoning, especially of children, is still a major public health concern in many parts of the world. In rural Mexican communities lead oxide (PbO) is added to ceramic glaze as a fluxing agent, lowering starting firing temperatures to 500 °C. The purpose of this study is to characterize the lead chemical forms in ceramic glazes from the Solis Valley, Mexico, to investigate lead leaching properties of these ceramics, and to demonstrate the applicability of lead isotope signatures as a means of tracing lead source origins. Ceramics were collected from the rural village of Santa Maria de Canchesda, State of Mexico, Mexico. Dried liquid glazes, post-fired glaze material, and pure PbO were analyzed by diffuse reflectance infrared Fourier transform spectroscopy (DRIFT). Results from DRIFT analysis indicate that PbO (1429 cm⁻¹ band) is the active form of lead found in liquid glazes and ceramics. Some shifting of 1429 cm⁻¹ PbO peak to lower wavenumbers occurs in post-fired ceramics, and this may be due to the formation of lead bisilicate during firing. Ceramics samples were leached in 0.02 M citric acid solution for 1 min, and leached lead concentrations were measured using inductively coupled plasma-mass spectrometry (ICP-MS). Lead concentrations in these leachates varied from 0.4-80.4 μg ml⁻¹, while the control pottery from the US leached only 0.1 μg ml⁻¹ lead. Elemental distributions on glaze surfaces were identified by laser ablation (LA)-ICP-MS. Nitric acid extracts of soils, teeth, and ceramic glazes were analyzed for lead isotope ratios (²⁰⁷Pb/²⁰⁶Pb vs. ²⁰⁸Pb/²⁰⁶Pb) using ICP-MS. Similarities of tooth and ceramic lead isotope ratios indicate that ceramics may be a substantial source of body lead burden in the Solis Valley. This study demonstrates the applicability of lead isotope ratios for lead source identification, and it identifies potential health risks from ceramic use induced lead toxicity within the Solis Valley.     

Application of tertiary amines for arsenic and selenium signal enhancement and polyatomic interference reduction in ICP-MS analysis of biological samples

Water soluble tertiary amines enhance signals and decrease polyatomic chloride interferences in the direct inductively coupled plasma – mass spectrometric (ICP-MS) determination of As and Se in biological samples. Preliminary experiments with amine concentrations and nebulizer flow rates produced element and interference signal intensity changes. Arsenic and Se ICP-MS determination parameters have been optimized by a simplex procedure with amines in an argon plasma or without amines but with addition of N₂ to the Ar. Variables include RF (radio frequency) power, nebulizer gas flow rate, intermediate gas flow rate, and amine concentration or nitrogen gas flow rate. Detection limit, minimization of polyatomic ion intensities, and reproducibility have been evaluated as reponse factors. The signal enhancement and element-to-molecular interference ratios differ to some extent with analyte intensity optimum operating conditions. The detection limits with addition of nitrogen (16 pg mL^–1 for As and 180 pg mL^–1 for Se) or of amines (8 pg mL^–1 for As and 120 pg mL^–1 for Se) and the extent of chloride interference minimization were compared. Amines addition was more beneficial. Biological standard reference materials and food and fecal samples were analyzed following different sample dissolution procedures.     

A theory of PWD-structures

A general study is undertaken of product-wedge-diagonal (=PWD) structures on a space. In part this concept may be viewed as arising from G.W. Whitehead's fat-wedge characterization of Lusternik-Schnirelmann category. From another viewpoint PWD-structures occupy a distinguished position among those structures that provide data allowing Hopf invariants to be defined. Indeed the Hopf invariant associated with a PWD-structure is a crucial component of the structure. Our overall theme addresses the basic question of existence of compatible structures on X and Y with regard to a map X→Y. A principal result of the paper uses Hopf invariants to formulate a Berstein-Hilton type result when the space involved is a double mapping cylinder (or homotopy pushout). A decomposition formula for the Hopf invariant (extending previous work of Marcum) is provided in case the space is a topological join U*V that has PWD-structure defined canonically via the join structure in terms of diagonal maps on U and V.