Phenomena Affecting the Equilibrium of Al(III) and Zn(II) Extraction with Winsor II Microemulsions

The extraction of Al(III) and Zn(II) from an aqueous solution with two water-in-oil microemulsions, one containing di(2-ethylhexyl)phosphoric acid (DEHPA), was investigated to aid the understanding of the role of the extractant and the metal specific characteristics in the mechanism of microemulsion extraction. The extraction of Al with the DEHPA microemulsion increased by a factor of about 10 with respect to that in the conventional DEHPA system, whereas the extraction of Zn was lower than that in the single DEHPA system. Extraction with the DEHPA-free microemulsion was very low, showing that metal ion solubilization was not important in the mechanism of microemulsion extraction. It is proposed that the effect of the mixed microemulsion on the metal distribution coefficient is the result of the balance between a decrease in the complexation reaction yield due to the interaction between butanol and DEHPA, and the adsorption of the metal complex at the macro- and microinterfaces. The former leads to a decrease in Zn(II) extraction and the latter to Al(III) extraction synergism. Copyright 2000 Academic Press.     

Electron ionization mass spectra and their reproducibility for trialkylsilylated derivatives of organic acids, sugars and alcohols

Mass spectra of trialkylsilyl derivatives of fatty acids, dicarboxylic acids, hydroxyacids, oxoacids, sugars, amino acids and alcohols were obtained. Amino acids were analyzed as tert-butyldimethylsilyl derivatives; all other model compounds were analyzed as trimethylsilyl derivatives. Reproducibility of the electron ionization (EI) mass spectra for the derivatives obtained was discussed. It was shown that, for many investigated derivatives, composition of the respective mass spectra depended greatly on ion source contamination. The trimethylsilylated alpha-tocopherol mass spectrum composition was most significantly influenced by ion source contamination. This compound can be used to test ion source contamination.     

Some new features of Direct Analysis in Real Time mass spectrometry utilizing the desorption at an angle option

The present study is a first step towards the unexplored capabilities of Direct Analysis in Real Time (DART) mass spectrometry (MS) arising from the possibility of the desorption at an angle: scanning analysis of surfaces, including the coupling of thin‐layer chromatography (TLC) with DART‐MS, and a more sensitive analysis due to the preliminary concentration of analytes dissolved in large volumes of liquids on glass surfaces. In order to select the most favorable conditions for DART‐MS analysis, proper positioning of samples is important. Therefore, a simple and cheap technique for the visualization of the impact region of the DART gas stream onto a substrate was developed. A filter paper or TLC plate, previously loaded with the analyte, was immersed in a derivatization solution. On this substrate, owing to the impact of the hot DART gas, reaction of the analyte to a colored product occurred. An improved capability of detection of DART‐MS for the analysis of liquids was demonstrated by applying large volumes of model solutions of coumaphos into small glass vessels and drying these solutions prior to DART‐MS analysis under ambient conditions. This allowed the introduction of, by up to more than two orders of magnitude, increased quantities of analyte compared with the conventional DART‐MS analysis of liquids. Through this improved detectability, the capabilities of DART‐MS in trace analysis could be strengthened. Copyright © 2011 John Wiley & Sons, Ltd.     

Fast quantitation of 5-hydroxymethylfurfural in honey using planar chromatography

An approach for rapid quantitation of 5-hydroxymethylfurfural (HMF) in honey using planar chromatography is suggested for the first time. In high-performance thin-layer chromatography (HPTLC) the migration time is approximately 5 min. Detection is performed by absorbance measurement at 290 nm. Polynomial calibration in the matrix over a range of 1:80 showed correlation coefficients, r, of ≥ 0.9997 for peak areas and ≥ 0.9996 for peak heights. Repeatability in the matrix confirmed the suitability of HPTLC–UV for quantitation of HMF in honey. The relative standard deviation (RSD, %, n = 6) of HMF at 10 ng/band was 2.9% (peak height) and 5.2% (peak area); it was 0.6% and 1.0%, respectively, at 100 ng/band. Other possible detection modes, for example fluorescence measurement after post-chromatographic derivatization and mass spectrometric detection, were also evaluated and can coupling can be used as an additional tool when it is necessary to confirm the results of prior quantitation by HPTLC–UV. The confirmation is provided by monitoring the HMF sodium adduct [M + Na]⁺ at m/z 149 followed by quantitation in TIC or SIM mode. Detection limits for HPTLC–UV, HPTLC–MS (TIC), and HPTLC–MS (SIM) were 0.8 ng/band, 4 ng/band, and 0.9 ng/band, respectively. If 12 μL honey solution was applied to an HPTLC plate, the respective detection limits for HMF in honey corresponded to 0.6 mg kg⁻¹. Thus, the developed method was highly suitable for quantitation of HMF in honey at the strictest regulated level of 15 mg kg⁻¹. Comparison of HPTLC–UV detection with HPTLC–MS showed findings were comparable, with a mean deviation of 5.1 mg kg⁻¹ for quantitation in SIM mode and 6.1 mg kg⁻¹ for quantitation in TIC mode. The mean deviation of the HPTLC method compared with the HPLC method was 0.9 mg kg^-1 HMF in honey. Re-evaluation of the same HPTLC plate after one month showed a deviation of 0.5 mg kg⁻¹ HMF in honey. It was demonstrated that the proposed HPTLC method is an effective method for HMF quantitation in honey.      

High-performance liquid chromatography coupled to mass spectrometry for studying new pharmaceutical entities

The review covers the aspects of the use of high-performance liquid chromatography coupled to mass spectrometry for studying new pharmaceutical entities. Attention is paid mainly to pharmacokinetic investigations. Different methods of sample preparation and approaches to minimize the duration of the analysis are discussed.     

机械泵驱动两相回路的实时动态模型分析

在航空航天领域,为了加速系统设计及测试进度,通常需要进行半实物实时仿真,即控制器用实物,受控对象采用数学模型。本文开发出了基于Matlab/Simulink的两相传热模块,并用其搭建了某机械泵驱动两相回路的实时动态模型。通过与实验的对比,验证了模型的可靠性,表明该模型满足实时要求,可以在下一步用于半实物仿真。