砂土串囊式充气锚杆承载力的研究

在砂土地层中,串囊式充气锚杆的研究还比较少,其承载特性及受力机理尚不明确。本文基于莫尔-库仑模型和Vesic圆孔扩张理论法,分别对圆柱体、球体、组合体、椭球体假设下的串囊式充气锚杆的扩大段进行计算分析。并将计算结果与试验得到的实测值进行对比。结果表明:四种形状假设中椭球体的形状假设理论值与实测值的误差最小,仅为8.35%。通过拟合试验数据,并引入与端阻力和侧摩阻力有关的两个系数对承载力公式进行修正,得到了抗拔承载力的经验公式。     

On the Relative Twist Formula of l-adic Sheaves

We propose a conjecture on the relative twist formula of l-adic sheaves, which can be viewed as a generalization of Kato—Saito's conjecture. We verify this conjecture under some transversal assumptions. We also define a relative cohomological characteristic class and prove that its formation is compatible with proper push-forward. A conjectural relation is also given between the relative twist formula and the relative cohomological characteristic class.     

Generalized P(N)-graded Lie superalgebras

We generalize the P(N)-graded Lie superalgebras of Martinez-Zelmanov. This generalization is not so restrictive but suffcient enough so that we are able to have a classification for this generalized P(N)-graded Lie superalgebras. Our result is that the generalized P(N)-graded Lie super-algebra L is centrally isogenous to a matrix Lie superalgebra coordinated by an associative superalgebra with a super-involution. Moreover, L is P(N)-graded if and only if the coordinate algebra R is commutative and the super-involution is trivial. This recovers Martinez-Zelmanov's theorem for type P(N). We also obtain a generalization of Kac's coordinatization via Tits-Kantor-Koecher construction. Actually, the motivation of this generalization comes from the Fermionic-Bosonic module construction.     

Rational Design of a Near-infrared Fluorescent Material with High Solid-state Efficiency,Aggregation-induced Emission and Live Cell Imaging Property

Near-infrared(NIR) fluorescent materials with high photoluminescent quantum yields(PLQYs) have wide application prospects. Therefore, we design and synthesize a D-A type NIR organic molecule, TPATHCNE, in which triphenylamine and thiophene are utilized as the donors and fumaronitrile is applied as the acceptor. We systematically investigate its molecular structure and photophysical property. TPATHCNE shows high T_gof 110℃ and T_d of 385℃ and displays an aggregation-induced emission(AIE) property. A narrow optical bandgap of 1.65 eV is obtained. The non-doped film of TPATHCNE exhibits a high PLQY of 40.3% with an emission peak at 732 nm, which is among the best values of NIR emitters. When TPATHCNE is applied in organic light-emitting diode(OLED), the electroluminescent peak is located at 716 nm with a maximum external quantum efficiency of 0.83%. With the potential in cell imaging, the polystyrene maleic anhydride(PMSA) modified TPATHCNE nanoparticles(NPs) emit strong fluorescence when labeling HeLa cancer cells, suggesting that TPATHCNE can be used as a fluorescent carrier for specific staining or drug delivery for cellular imaging. TPATHCNE NPs fabricated by bovine serum protein(BSA) are cultivated with mononuclear yeast cells, and the intense intracellular red fluorescence indicates that it can be adopted as a specific stain for imaging.     

Solar light-driven photocatalytic production of hypochlorous acid over Pt/WO3 in seawater for marine antifouling

The hypochlorous acid (HCIO) was synthesized from seawater by the Pt/WO₃ photocatalyst under visible-light irradiation. The effect of WO₃ morphology and Pt loading on the performance of the composite photocatalyst for the production of HCIO has been studied in detail. The study found that among the series of materials, hollow WO₃ microspheres with a diameter of about 3 μm loaded with 1.0 wt% Pt have the best HCIO production performance. Over it, 14.52 μM of HClO (1.24 mg/L of free chlorine) was accumulated in 0.5 M NaCl solution after 2 h of visible-light photoirradiation. What is more, the concentration of HClO can reach 4.34 μM (0.354 mg/L free chlorine) in natural seawater for 1 h using this Pt/WO₃ photocatalyst. Under visible-light irradiation, the Pt/WO₃ photocatalyst has a good broad-spectrum antibacterial activity and the activity of inhibiting marine fouling algae. The Pt/WO₃ photocatalyst has high stability and reusability. All these characteristics are conducive to the application in the field of marine antifouling. Moreover, the photocatalytic reaction mechanism was evaluated by studying the photoelectrochemical properties of Pt/WO₃/FTO. This research provides a new strategy for replacing the traditional electrolytic marine antifouling system with the visible-light-catalyzed HClO production system.

     

一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究

本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150 ℃。     

射频等离子制备石墨烯负载Co3O4催化剂及其析氧性能研究

氢能的引入能有效提升配电网的供电可靠性,而电解水制氢是实现低碳转型的关键技术,开发高效的电解水催化剂势在必行。过渡金属氧化物储量大、催化活性高,是具有广阔应用前景的析氧反应催化剂。本文通过射频等离子体处理制备石墨烯上负载Co₃O₄析氧催化剂,XRD、Raman和XPS测试结果显示,二维结构石墨烯的引入加速表面电子迁移,增大了反应面积。等离子体处理促进了纳米粒子在石墨烯上的负载,利用等离子体刻蚀作用在催化剂表面制造出大量碳结构缺陷和氧空位结构,改善了活性位点分布,有效调控Co₃O₄电子结构,提高析氧催化活性。电化学测试表明,本文中合成的Co₃O₄@rGO在电流密度为50 mA·cm^-2时的过电位为410 mV,动力学反应速率较快,表现出优于商业IrO₂的析氧催化活性。     

1,3-丁二烯选择性加氢催化剂的设计策略以及构效关系

催化裂化是石油化工的核心单元之一.从催化裂化尾气中分离出来的碳四馏分富含许多的不饱和烯烃,如1-丁烯、顺、反式-2-丁烯以及少量的1,3-丁二烯,这些不饱和烯烃可以通过后续聚合反应,生成合成橡胶和工程塑料的重要原料,具有重要的应用价值.上述工艺过程对原料中1,3-丁二烯的含量(<100~200 ppm)有严苛的要求.采用选择性加氢技术对碳四馏分中的1,3-丁二烯进行选择性加氢,将其转化为更高附加值的单烯烃是一个理想的解决方案.然而,1,3-丁二烯加氢反应得到的单烯烃可能发生深度加氢得到副产物丁烷.因此,开发高效选择性加氢催化剂对碳四资源的利用具有重要的现实意义.另一方面,1,3-丁二烯加氢反应可以作为模型反应,用来考察选择性加氢催化剂的性能.基于此,该反应无论在工业界还是学术界均受到广泛关注.尽管如此,有关1,3-丁二烯加氢催化剂研究进展方面的综述极少.仅有关于1,3-丁二烯加氢作为模型反应的综述报道.本文对过去半个世纪以来1,3-丁二烯加氢反应中不同催化剂的发展历程进行系统综述,特别是包括Pd,Pt和Au等的单一贵金属催化剂.重点介绍以下内容:(1)固体催化剂构效关系,包括活性金属尺寸效应、晶面和形貌效应以及载体效应(晶相、孔道和酸碱性);(2)高性能催化剂的设计新策略,如单原子催化剂、核壳结构催化剂、金属-离子液复合催化体系以及载体的形貌调控;(3)催化剂的反应机理和失活机理.提出了1,3-丁二烯选择性加氢高性能催化剂开发面临的挑战,并对潜在的发展方向进行了展望.本文认为随着纳米技术和金属纳米材料合成方法的快速发展,对贵金属活性组分进行原子层面上的调控(包括形貌、尺寸以及单原子配位环境等)已成为可能.这将有助于研制出一类新型高性能选择性加氢催化材料,从而实现高转化率条件下高附加值单烯烃的定向转化.此外,载体的酸碱性和孔道结构的调控有助于进一步调节催化剂的抗积炭性能,也是未来发展的一个重要方向.     

Dinuclear Zinc Catalyzed Enantioselective Dearomatization [3+2] Annulation of 2-Nitrobenzofurans and 2-Nitrobenzothiophenes

The application of dinuclear zinc catalysts in a dearomatization reaction has been developed. Catalytic asymmetric dearomatization [3+2] annulations of 2-nitrobenzofurans or 2-nitrobenzothiophenes with CF₃-containing N-unprotected isatin-derived azomethine ylides catalyzed by dinuclear zinc catalysts are realized with excellent diastereomer ratios (dr) of >20 : 1 and enantiomeric excess (ee) of up to 99 %. This protocol provides a practical, straightforward access to structurally diverse pyrrolidinyl spirooxindoles containing a 2,3-fused-dihydrobenzofuran (or dihydrobenzothiphene) moiety, and four contiguous stereocenters. Reactions can be performed on a gram scale. The absolute configuration of products is confirmed by X-ray single crystal structure analysis, and a possible mechanism is proposed.