Piezoelectric Nanogenerator Based on Electrospun Cellulose Acetate/Nanocellulose Crystal Composite Membranes for Energy Harvesting Application

Nanogenerators, as the typical conversion of mechanical energy to electrical energy devices, have great potential in the application of providing sustainable energy sources for powering miniature devices. In this work, cellulose acetate/cellulose nanocrystal(CA/CNC) composite nanofiber membranes were prepared by electrospinning method and then utilized to manufacture a flexible pressure-driven nanogenerator. The addition of CNC not only increased the content of piezoelectric cellulose I crystallization but also strengthened the mechanical deformation of the nanofiber membranes, which could greatly enhance the piezoelectric performance of CA/CNC composite membranes. The CA/CNC composite nanofiber membrane with 20%(mass fraction) of CNC(CA/CNC-20%) showed optimal piezoelectric conversion performance with the output voltage of 1.2 V under the force of 5 N(frequency of 2 Hz). Furthermore, the output voltage of the CA/CNC-20% nanogenerator device exhibited a linear relationship with applied impact force, indicating the great potential in pressure sensors.     

混合熔盐法低温合成Sm2Ti2S2O5及其光催化分解水产氢

以TiO2、TiS2及Sm2O3为前驱体,分别加入LiCl-KCl与LiCl-CsCl的最低共熔混合物作为熔盐,在较低温度下成功合成了Sm2Ti2S2O5(STSO)颗粒。通过对比不同温度下所制备产物的X射线衍射图,首次表明STSO的热力学结晶温度在520℃左右,远低于之前报道的650℃的最低合成温度。扫描电子显微镜照片显示,采用2种混合熔盐制备的STSO都呈片状形貌;同一合成温度下,采用LiCl-CsCl熔盐制备的STSO的厚度小于LiCl-KCl所得产物。采用出射光波长大于420 nm的氙灯作为光源,在含有Na2S-Na2SO3空穴牺牲剂的溶液中,所制备的STSO颗粒表现出最高35μmol·h-1的光催化分解水产氢活性以及20 h以上的产氢稳定性。     

靶向抑制拓扑异构酶和端粒酶的钌配合物研究进展

金属配合物抗肿瘤研究,尤其是铂类药物,已取得了相对令人瞩目的成功,但同时也面临着包括耐药性和毒副作用等诸多问题。近年来钌配合物作为新的抗癌药物引起了人们的注意。在非铂系药物中,金属钌配合物是最有前途的抗癌药物之一,国际上普遍认为钌和钌的配合物属于低毒性,容易吸收并在体内很快排泄。本文将着重介绍钌配合物与DNA结合后进一步引发的细胞内核酶活性抑制研究,从新的角度来诠释钌配合物的抗肿瘤研究最新进展。     

搅拌速率对β-PbO_2-CeO_2-ZrO_2复合电极材料电化学性能的影响

为了提高三价铬镀铬工艺中阳极材料的性能,采用阳极氧化法制备了掺杂纳米颗粒的β-Pb O2-Ce O2-Zr O2复合电极材料。通过扫描电化学显微镜和析氧极化曲线的测量,考察了不同搅拌速率条件下制备的复合电极材料在硫酸盐体系三价铬镀液中的电催化活性,利用塔菲尔曲线考察了复合电极材料的耐蚀性,并辅以扫描电镜表征了电极材料的微观形貌。结果表明:当施镀搅拌速率为350 r·min-1时,所制备的复合电极材料具有结构致密、电催化活性高、耐蚀性强等特点。     

轮胎钢丝帘线拉伸力学性能的实验研究

对两种结构类型的钢丝帘线在单向拉伸和循环加载下的力学性能进行了实验研究。结果表明：帘线的结构形式对拉伸力学性能（包括摩擦能量损耗）有显著影响。不考虑载荷很小的情况时，普通结构帘线可近似为弹脆性材料，高伸长结构帘线却可以产生较大的塑性变形；循环载荷下，普通结构帘线几乎没有摩擦能量损耗，而高伸长结构帘线不仅有明显的摩擦能量损耗，而且随着循环应力幅值的增加，摩擦能量损耗呈加速增加的趋势；在循环应力幅值较大时高伸长结构帘线还出现了类似于高温下循环硬化金属材料的循环蠕变现象。文章还讨论了高伸长结构帘线由于塑性变形而引起循环蠕变现象的机理。     

Poly(aryl ether ketone) composite membrane as a high‐performance lithium‐ion batteries separator

We described the design and synthesis of a modified poly(aryl ether ketone) bearing phenolphthalein and allyl groups (P‐PAEK) via nucleophilic polycondensation. A new kind of composite separator, crosslinked P‐PAEK/polyvinylidene fluoride (c‐P‐PAEK/PVDF) membrane was successfully prepared using phase separation, phase inversion method, and UV crosslinking technique. As a separator of lithium‐ion battery, c‐P‐PAEK/PVDF membrane demonstrates high porosity and uniform distribution of pores with interconnected pathways. Low thermal shrinkage, distinct shut‐down effect, high liquid electrolyte uptake capacity, and exciting liquid electrolyte wettability of the prepared c‐P‐PAEK/PVDF membrane have been revealed through comprehensive study. Moreover, the c‐P‐PAEK/PVDF membrane was applied to assemble a conventional Li/LiFePO₄ coin cell, which exhibited hopeful cell performance. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2714–2721     

钌多吡啶配合物与DNA相互作用研究新进展

DNA是携带遗传信息和基因表达的基本物质.因为复杂的生物环境以及外源因素的影响,DNA存在灵活多变的结构,而不同的构型都有其独特的意义和重要的生物学功能,相关研究受到越来越广泛的关注.本文主要针对近年来钌多吡啶化合物与DNA相互作用研究的最新进展做一综述,包括DNA结构的识别,DNA二级、三级结构的调控,DNA光交联以及作为非病毒基因载体,细胞成像以及抗肿瘤等方面的应用.     

Preparation of MnO2 Loaded Hydrothermal Carbon-coated Electrospun PAN Fiber Membranes for Highly Efficient Adsorption and Separation of Cationic Dye

Hydrothermal carbonaceous materials and MnO₂ have been proved to be promising adsorbents to remove organic dyes from wastewater. In this study, flexible MnO₂ loaded hydrothermal carbon-coated electrospun poly-acrylonitrile(AC/MnO₂/PAN) fiber membranes were fabricated by a facile one-step hydrothermal method and activated by NaOH solution. The composite fibers exhibited large adsorption capacity toward cationic dyes and excellent mechanical properties. The adsorption performance can be fitted well with pseudo-second-order model and Langmuir isotherm model. The maximum adsorption for methylene blue(MB), methyl violet(MV) and malachite green(MG) are 1173.27,1106.31 and 1129.89 mg/g, respectively, according to Langmuir fitting. The AC/MnO₂/PAN fiber membrane also showed satisfactory performances for selective adsorption and recyclability. In addition, based on selective adsorption, the AC/MnO₂/PAN fiber membranes that are repulsive to the anionic dye methyl orange(MO) can separate the MB/MO mixture solution by dynamic filtration. Thus, this work not only provides a facile strategy to fabricate large capacity adsorbents, but also demonstrates the potential applications in the dye wastewater treatment field.     

基质效应对有机磷农药测定的影响及其解决方法

该文以液液萃取-气相色谱法探讨了基质对乐果、甲基对硫磷、马拉硫磷和对硫磷4种有机磷测定的影响以及解决方法.研究表明,气相色谱法测定有机磷农药的过程中基质效应显著存在,其基质增强比例为1.01 ～3.46.基质效应由基质种类及含量、有机磷农药种类及浓度等因素决定,同时与萃取溶剂、测定条件(如衬管、进样口温度等)有关.不同萃取溶剂对有机磷农药的萃取效率不同,但均存在基质增强效应;当进样口温度为260 ℃时,可最大程度降低基质在衬管中的残留,且不造成有机磷农药的分解;衬管则应首选带玻璃棉的.实际样品/标准样品的交替进样方式可以降低基质效应强度,但难以达到回收率要求,而校正因子校正法及分析保护剂法则是降低或消除基质效应的可行办法.     

关于扇和完全等二部图联图的点可区别边染色

通过结构分析的方法,考虑各种不同情况,给出了一类联图的点可区别的边染色方法,并得到了它的点可区别的边色数.