Synthesis,Antibacterial, and Antioxidant Evaluation of Novel Series of Condensed Thiazoloquinazoline with Pyrido,Pyrano, and Benzol Moieties as Five- and Six-Membered Heterocycle Derivatives

A novel synthesis of thiazolo[2,3-b]quinazolines 4(a–e), pyrido[2′,3′:4,5]thiazolo[2,3-b]quinazolines {5(a–e), 6(a–e), and 7(a–e)}, pyrano[2′,3′:4,5]thiazolo[2,3-b]quinazolines 8(a–e), and benzo[4,5]thiazolo[2,3-b]quinazoloine9(a–e) derivatives starting from 2-(Bis-methylsulfanyl-methylene)-5,5-dimethyl-cyclohexane-1,3-dione 2 as efficient α,α dioxoketen dithioacetal is reported and the synthetic approaches of these types of compounds will provide an innovative molecular framework to the designing of new active heterocyclic compounds. In our study, we also present optimization of the synthetic method along with a biological evaluation of these newly synthesized compounds as antioxidants and antibacterial agents against the bacterial strains, like S. aureus, E. coli, and P. aeruginosa. Among all the evaluated compounds, it was found that some showed significant antioxidant activity at 10 μg/mL while the others exhibited better antibacterial activity at 100 μg/mL. The results of this study showed that compound 6(c) possessed remarkable antibacterial activity, whereas compound 9(c) exhibited the highest efficacy as an antioxidant. The structures of the new synthetic compounds were elucidated by elemental analysis, IR, ¹H-NMR, and ¹³C-NMR.     

Cetyl‐alcohol‐reinforced hollow fiber solid/liquid‐phase microextraction and HPLC–DAD analysis of ezetimibe and simvastatin in human plasma and urine

A new cetyl‐alcohol‐reinforced hollow fiber solid/liquid‐phase microextraction (CA–HF–SLPME) followed by high‐performance liquid chromatography–diode array detection (HPLC–DAD) method was developed for simultaneous determination of ezetimibe and simvastatin in human plasma and urine samples. To prepare the CA–HF–SLPME device, the cetyl‐alcohol was immobilized into the pores of a 2.5 cm hollow fiber micro‐tube and the lumen of the micro‐tube was filled with 1‐octanol with the two ends sealed. Afterwards, the prepared device was introduced into 10 mL of the sample solution containing the analytes with agitation. Under optimized conditions, calibration curves plotted in spiked plasma and urine samples were linear in the ranges of 0.363–25/0.49–25 μg L^?1 for ezetimibe/simvastatin and 0.193–25/0.312–25 μg L^?1 for ezetimibe/simvastatin in plasma and urine samples, respectively. The limit of detection was 0.109/0.174 μg L^?1 for ezetimibe/simvastatin in plasma and 0.058/0.093 μg L^?1 for ezetimibe/simvastatin in urine. As a potential application, the proposed method was applied to determine the concentration of selected analytes in patient plasma and urine samples after medication and satisfactory results were achieved. In comparison with reference methods, the CA–HF–SLPME–HPLC–DAD method demonstrates considerable potential in the biopharmaceutical analysis of selected drugs.     

On the Rayleigh-Plateau instability

In this paper,we study the surface instability of a cylindrical pore in the absence of stress. This instability is called the Rayleigh-Plateau instabilty. We consider the model developed by Spencer et ...     

Examination of Template Structural Effects on CEC Chiral Separation Performance of Molecule Imprinted Polymers Made by a Generalized Preparation Protocol

Some acidic chiral templates were used to prepare open tubular (OT) molecule imprinted polymer (MIP) capillary columns to explore the effects of molecular structures of templates on chiral recognition capabilities and to verify the feasibility of the general MIP preparation protocol introduced in the previous study. The templates are phenyl carboxylic acids and their derivatives. Optimization was carried out for chiral separation of template enantiomers for each MIP column through varying pH and composition of eluent. It was found that the preparation protocol can be successfully applied for the appropriate templates with functional groups fulfilling the three-points interaction rule. The chiral separation performances were quite satisfactory for MIPs of such templates although they are yet inferior to the separation performances of the MIP columns fabricated with the templates of profen drugs (2-arylpropionic acids with a large substituent on the phenyl ring). Subtle variations of the template molecular structures have been found to be critical to enhance chiral recognition ability of the resultant MIP column.     

Enantioselective determination of modafinil in pharmaceutical formulations by capillary electrophoresis, and computational calculation of their inclusion complexes

A fast capillary electrophoretic method is described for the separation and determination of the enantiomers of the novel wake-promoting agent, modafinil. Several parameters affecting the separation were studied, including the type and concentration of chiral selector, buffer pH, buffer concentration, voltage and temperature. Good chiral separation of the racemic mixture was achieved in less than 5 min with resolution factor Rs?=?2.51, using a bare fused-silica capillary and a background electrolyte (BGE) of 25 mM H₃PO₄?1 M tris solution; pH 8.0; containing 30 mg mL^?1 of sulfated-β-cyclodextrin (S-β-CD). The separation was carried out in normal polarity mode at 25 ^?C, 18 kV and using hydrostatic injection. Acceptable validation criteria for selectivity, linearity, precision, and accuracy were included. The developed method was successfully applied to the assay of enantiomers of modafinil in pharmaceutical formulations. The computational calculations for the enantiomeric inclusion complexes rationalized the reasons for the different migration times between the modafinil enantiomers.     

An Identification Problem for First-Order Degenerate Differential Equations

We study a first-order identification problem in a Banach space. We discuss the nondegenerate and mainly the degenerate case. As a first step, suitable hypotheses on the involved closed linear operators are made in order to obtain unique solvability after reduction to a nondegenerate case; the general case is then handled with the help of new results on convolutions. Some applications to partial differential equations motivate this abstract approach.Communicated by I. GalliganiWork partially supported by MIUR (Ministero dell’ Istruzione, dell’ Università e dalla Ricerca), Project PRIN 2004011204 “Analisi Matematica nei Problemi Inversi,” and by the University of Bologna Funds for Selected Research Topics.     

Dynamics of hyperthermal collisions of O(3P) with CO

The dynamics of O(3P) + CO collisions at a hyperthermal collision energy near 80 kcal mol-1 have been studied with a crossed molecular beams experiment and with quasi-classical trajectory calculations on computed potential energy surfaces. In the experiment, a rotatable mass spectrometer detector was used to monitor inelastically and reactively scattered products as a function of velocity and scattering angle. From these data, center-of-mass (c.m.) translational energy and angular distributions were derived for the inelastic and reactive channels. Isotopically labeled C18O was used to distinguish the reactive channel (16O + C18O 16OC + 18O) from the inelastic channel (16O + C18O 16O + C18O). The reactive 16OC molecules scattered predominantly in the forward direction, i.e., in the same direction as the velocity vector of the reagent O atoms in the c.m. frame. The c.m. translational energy distribution of the reactively scattered 16OC and 18O was very broad, indicating that 16OC is formed with a wide range of internal energies, with an average internal excitation of approximately 40% of the available energy. The c.m. translational energy distribution of the inelastically scattered C18O and 16O products indicated that an average of 15% of the collision energy went into internal excitation of C18O, although a small fraction of the collisions transferred nearly all the collision energy into internal excitation of C18O. The theoretical calculations, which extend previously published results on this system, predict c.m. translational energy and angular distributions that are in near quantitative agreement with the experimentally derived distributions. The theoretical calculations, thus validated by the experimental results, have been used to derive internal state distributions of scattered CO products and to probe in detail the interactions that lead to the observed dynamical behavior.     

Crossed beams and theoretical studies of the dynamics of hyperthermal collisions between Ar and ethane

Crossed molecular beams experiments and classical trajectory calculations have been used to study the dynamics of Ar+ethane collisions at hyperthermal collision energies. Experimental time-of-flight and angular distributions of ethane molecules that scatter into the backward hemisphere (with respect to their original direction in the center-of-mass frame) have been collected. Translational energy distributions, derived from the time-of-flight distributions, reveal that a substantial fraction of the collisions transfer abnormally large amounts of energy to internal excitation of ethane. The flux of the scattered ethane molecules increased only slightly from directly backward scattering to sideways scattering. Theoretical calculations show angular and translational energy distributions which are in reasonable agreement with the experimental results. These calculations have been used to examine the microscopic mechanism for large energy transfer collisions ("supercollisions"). Collinear ("head-on") or perpendicular ("side-on") approaches of Ar to the C-C axis of ethane do not promote energy transfer as much as bent approaches, and collisions in which the H atom is "sandwiched" in a bent Ar...H-C configuration lead to the largest energy transfer. The sensitivity of collisional energy transfer to the intramolecular potential energy of ethane has also been examined.     

Novel microscopic mechanism of intermixing during growth on soft metallic substrates

Generic computer simulations using empiric interatomic potentials suggest a new, collective mechanism that could be responsible for mixing at heteroepitaxial interfaces. Even if single adsorbate atoms diffuse by hopping on the substrate surface and do not mix at the terraces, two-dimensional islands formed by nucleation may become unstable above a certain critical size and explode upwards forming clusters of several atomic layers. This process is accompanied by strong distortions of the underlying atomic layers, and on soft materials it can result in surface etching and incorporation of substrate atoms into the islands.