Carbohydrate-based nanostructured catalysts: applications in organic transformations

The requirement of green and sustainable materials to prepare heterogeneous catalysts has intensified for practical reasons over the past few decades. Carbohydrates are possibly the most plentiful and renewable organic materials in nature with inimitable physiochemical properties, plausible low-cost and large-scale production, and sustainability features could be exploited in the generation of nanostructured heterogeneous catalysts. This review article outlines the organic transformations catalyzed by diverse carbohydrate-based nanostructured catalysts in greener and environmentally friendly processes. Selected examples are highlighted for a variety of organic reactions exploiting the proposed catalysts’ reactivity and reusability, and interactions with the intrinsic nature of the applied carbohydrate supports; advantages and speculated challenges of the introduced catalysts are deliberated as well.     

Anodic hydroxylation of 1-carbomethoxy-1,2,3,4-tetrahydrocarbazoles

1-Carbomethoxy-1,2,3,4-tetrahydrocarbazole (1) and its 7-methoxy derivative (2) were oxidized at carbon felt anodes in acetonitrile containing 0.2 M LiClO₄ and 2-17 M water at potentials on the rising portion of the primary oxidation peak to yield products formed by formal substitution of the C-1 H atom with hydroxide. The resulting 1-hydroxy-l-carbomethoxy-1,2,3,4-tetrahydrocarbazole and its 7-methoxy derivative were isolated in 44 and 22% yields, respectively, when sodium bicarbonate was used to control acidity of the medium. Structures were elucidated by NMR, IR, elemental analysis, and mass spectrometry. Voltammetry at carbon-paste and glassy carbon electrodes showed that the oxidations proceed by an ECE or DISPI pathway. The rate-determining step is the reaction of water with a cation radical electrochemically generated from 1 or 2, involving either proton abstraction or nucleophilic addition.     

Highly Efficient Solvent-Free Synthesis of Dihydropyrimidinones Catalyzed by Zinc Oxide

A simple, efficient and practical procedure for the Biginelli reaction using zinc oxid (ZnO) as a novel and reusable catalyst is described under solvent-free conditions in high yields. The use of this agent is characterized by remarkable reactivity, moderate costs, low toxicity and simple work up procedures.     

Novel modified carbon nanotubes as a selective sorbent for preconcentration and determination of trace copper ions in fruit samples

In this work, multiwalled carbon nanotubes were reacted with N‐[3‐(triet‐hoxysilyl)propyl]isonicotinamide to prepare pyridine‐functionalized carbon nanotubes. This novel sorbent was characterized by infrared spectroscopy, thermal and elemental analysis, and scanning electron microscopy. Functionalized carbon nanotubes were applied for the preconcentration and determination of copper ions using flame atomic absorption spectrometry. Various parameters such as sample pH, flow rate, eluent type and concentration, and its volume were optimized. Under optimal experimental conditions, the limit of detection, the relative standard deviation, and the recovery of the method were 0.65 ng/mL, 3.2% and 99.4%, respectively. After validating the method using standard reference materials, the new sorbent was applied for the extraction and determination of trace copper(II) ions in fruit samples.     

Effect of self-fields on the electron cyclotron maser instability in a dielectric loaded waveguide

The influence of self-fields on the cyclotron maser instability in a hollow electron beam propagating parallel to a uniform axial magnetic field B ₀ ê _z in a dielectric loaded waveguide is investigated. The theoretical analysis is carried out within the framework of linearized Vlasov-Maxwell equations. It is assumed that the beam is thin with the radial thickness much smaller than the beam radius. A new dispersion relation for azimuthally symmetric electromagnetic perturbation is derived and analyzed numerically. The influence of self-fields on the cyclotron maser instability in a dielectric loaded waveguide for different dielectric medium is studied. It is found that unlike the hollow waveguide the growth rate is increased by increasing self-fields. The instability band width decreases due to the increasing self-fields. The maximum growth rate increases gradually as self-fields increase as regards a different dielectric medium.     

Parallel single-cell optical transit dielectrophoresis cytometer

In this work, we present an optical transit DEP flow cytometer for parallel single-cell analysis. Each cell's dielectric property is inferred from velocity perturbations due to DEP actuation in a microfluidic channel. Dual LED sources facilitate velocity measurement by producing two transit shadows for each cell passing through the channel. These shadows are detected using a 256-pixel linear optical array detector. Massively parallel analysis is possible as each pixel of the detector can independently analyze the passing cells. A wide channel (∼18 mm) was employed to carry many particles simultaneously, and the system was capable of detecting the velocity of over 200 cells simultaneously. We have achieved analysis rates for 10 µm diameter polystyrene spheres response exceeding 250 per second. With appropriate calibration, this DEP cytometer can quantitatively measure the dielectric response. The dielectric response (Clausius–Mossotti factor) of viable CHO cells was measured over the frequency range of 100 kHz to 6 MHz, and the obtained response matches the previously measured values by our group. The DEP cytometer uses simple modular components to achieve high throughput label-free single-cell dielectric analysis and can begin analyzing particles within 10 s after starting to pump the sample into the channel.     

Viscosity of n-alkyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)amide ionic liquids saturated with compressed CO2

The viscosity of imidazolium-based ionic liquids (ILs) saturated with gaseous, liquid and supercritical carbon dioxide (CO₂) was measured by a high-pressure viscometer at three different temperatures (25, 50, and 70 °C). The high-pressure viscosity of 1-ethyl-3-methylimidazolium ([EMIm]), 1-n-hexyl-3-methylimidazolium ([HMIm]), and 1-n-decyl-3-methylimidazolium ([DMIm]) cations with a common anion, bis(trifluoromethylsulfonyl)amide ([Tf₂N]), saturated with CO₂ was measured up to a maximum of 287 bar. As CO₂ pressure is increased the viscosity of the IL mixture dramatically decreases. While, the ambient pressure viscosity of 1-alkyl-3-methyl-imidazolium [Tf₂N] ILs increases significantly with increasing chain length, the viscosity of all the CO₂-saturated ILs becomes very similar at high CO₂ pressures. From previous vapor–liquid equilibrium data, the viscosity with concentration was determined and found to be the primary factor to describe the fractional viscosity reduction. Several predictive and correlative methods were investigated for the mixture viscosity given pure component properties and include arithmetic mixing rules, the Irving (Predictive Arrhenius) model, Grunberg equation, etc. The modified Grunberg model with one adjustable parameter provided an adequate fit to the data.     

Diastereoselective Synthesis of Novel Benzofuran Derivatives by Euparin as a Natural Compound with DMAD in the Presence of Trialkyl Phosphite

An efficient, simple, and diastereoselective synthesis of novel benzofuran phosphonato ester derivatives has been achieved via a one‐pot three‐component reaction of euparin as a natural product, trialkyl phosphate, and dimethyl acetylenedicarboxylate (DMAD) in diethyl ether without using any catalyst at room temperature. NMR spectroscopic data and X‐ray crystallography analysis are in agreement with the anti arrangement for the two vicinal protons in the structures, and only one diastereoisomer (2S,3R) or (2R,3S) was obtained for the products. The advantage of our research is that this is the first report for the diastereoselective synthesis of phosphonato ester derivatives from a green natural product. This one‐pot reaction occurs in high yields with easy work‐up under mild conditions. All pure products were obtained by recrystallization from ethanol, and there was no need for column chromatography.