Stability testing in an integrated scheme

ISO Guide 35 deals with RM stability issues and scrutinizes the evaluation of stability testing results under the assumption that either there is no trend at all (a rather rare situation), or any observed deterministic change is insignificant and thus can be neglected. However, market demands for reliable reference materials are obviously not limited to stable or at least seemingly stable materials. In many analytical applications, analytes and measurands under consideration are known, or at least suspected, to be unstable on time scales that may vary widely from measurand to measurand. The Federal Institute for Materials Research and Testing (BAM) has developed (and successfully uses) an integrated approach in its certification practice. The approach is based on an initial stability study and subsequent post-certification monitoring. Data evaluation is model-based and takes advantage of all information collected in the stability testing scheme(s). It thus allows one to deal with any kind of instability observed, to assess limiting time intervals at any stress condition in the range tested, to estimate a final expiry date for materials with detected instabilities or the maximum admissible re-testing interval for seemingly stable materials, and to assess maximum admissible stress loads during delivery of the material to the customer. The article describes (and exemplifies) typical study layout, the model selection, and the integrated data assessment.     

Chemical analysis of acidic silicon etch solutions: I. Titrimetric determination of HNO3, HF, and H2SiF6

The chemical etching of silicon using HF-HNO₃ mixtures is a widely used process in the processing of silicon wafers for microelectronic or photovoltaic applications. The control of the etch bath composition is the necessary condition for an effective bath utilization, for the replenishment of the consumed acids, and to maintain a certain etch rate. The present paper describes two methods for the total analysis of the individual etch bath constituents HF, HNO₃, and H₂SiF₆. Both methods start with an aqueous acid-base titration determining the total acid concentration and the concentration of H₂SiF₆. The first method is an acid-base titration using a 0.1 mol L⁻¹ methanolic solution of cyclohexylamine (CHA) as non-aqueous titrant to determine the content of nitric acid. Then, the amount of hydrofluoric acid is calculated from the difference between the total acid and nitric acid content. The second method is based on the determination of the total fluoride concentration using a fluoride ion-selective electrode (F-ISE). The content of hydrofluoric acid is obtained from the difference between the total fluoride content and the amount of fluoride bound as H₂SiF₆. The amount of nitric acid results finally calculated as difference to the total acid content.     

Solution- and bound-state conformational study of N,N',N"-triacetyl chitotriose and other analogous potential inhibitors of hevamine: application of trNOESY and STD NMR spectroscopy

The solution-state conformations of N,N',N"-triacetyl chitotriose (1) and other potential chitinase inhibitors 2-4 were studied using a combination of NMR spectroscopy (NOESY) and molecular mechanics calculations. Determination solely of the global energy minimum conformation was found to be insufficient for an agreement with the NMR results. An appropriate consistency between the NMR experimental data and theoretical calculations was only reached by assessing the structures as population-weighted average conformers based on Boltzmann distributions derived from the calculated relative energies. Analogies, but also particular differences, between the synthetic compounds 2-4 and the naturally-occurring N,N',N"-triacetyl chitotriose were found. Furthermore, the conformation of compounds 1 and 2 when bound to hevamine was also studied using transferred NOESY experiments and the binding process was found to impart a level of conformational restriction on the ligands. The preferred conformation as determined for 1 in the bound state to hevamine belonged to one of the conformational families found for the compound when free in solution, although full characterisation of the bound-state conformations was impeded due to severe signal overlap. Saturation transfer difference NMR experiments were also employed to analyse the binding epitopes of the bound compounds. We thus determined that it is mainly the acetyl amido groups of the trisaccharide and the heterocyclic moiety which are in close contact with hevamine.     

Automated multiple-layer spotting for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of synthetic polymers utilizing ink-jet printing technology

Recently, a new multiple-layer matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) sample spotting technique for poly(ethylene glycol), offering improved analysis possibilities, was described. In this contribution the application of ink-jet printing to automated, multiple-layer MALDI-TOFMS sample preparation of synthetic polymers is presented, allowing accurate deposition of matrix, additive and analyte solutions. The new sample preparation technique was evaluated for poly(ethylene glycol) as well as poly(methyl methacrylate) standards, and optimized settings for both synthetic polymers have been obtained.     

Biosensors for environmental pollutants and food contaminants

This review article provides an overview of the most recent literature on biosensors for environmental pollutants and food contaminants. Due to the large number of publications, only papers published between 2000 and January 2003 were considered. Also, while not all of the published literature could be reviewed here, over 200 references are cited to provide a good overview of research undertaken in the last two years. Older publications are covered by a number of earlier review articles. This article provides an introduction into the field including specific consideration of the application areas, describes the typical biosensor assay format used, and is subsequently structured according to the biorecognition elements used (i.e., nucleic acids, enzymes, whole cells, tissue and whole organisms, antibodies and receptors, and biomimetic materials). In addition, a section on microbiosensing systems is provided. Since only very few microbiosensors with applications in environmental and food systems have been published, enabling technology is also covered in this article.Abbreviations BOD biological oxygen demand - cfu colony forming units - DNP dinitrophenol - GFP green fluorescent protein - NASBA nucleic acid sequence-based amplification - PCR polymerase chain reaction - ppt parts per trillion - QCM quartz crystal microbalance - SPR surface plasmon resonance     

Application of Task-specific Ionic Liquids for Intensified Separations

Summary. Ionic liquids offer tremendous opportunities to intensify reactions and separations in process technologies by tuning their physical and chemical properties. Several ionic liquids are suitable for the separation of aromatic and aliphatic hydrocarbons. CO₂ absorption behavior was influenced by the functionalized chains appended to the room temperature ionic liquid (RTIL) cation. Ionic liquids seem able to combine the chemical features of amine solutions with the characteristic advantages of the physical solvents used for CO₂ absorption.     

Stereoselective Synthesis of Isomers of the Naturally Occurring 13-Hydroxy-2,4,9-tetradecatrienoic Acid. Part II [1]

The stereoselective syntheses of four unsaturated hydroxy fatty acids 13S,2E,4E,9E)- 13-hydroxy-2,4,9-tetradecatrienoic acid, (13S,9Z,11E)-13-hydroxy-9,11-tetradecadienoic acid, (13S,9E, 11E)-13-hydroxy-9,11-tetradecadienoic acid, and (13S,2E,4E,9E)-13-hydroxy-2,4,9,11-tetradecatrienoic acid, are described. Wittig reactions, regioselective oxidation of dialcohol 3, and diastereomerization were used.     

A Novel Anti-Inflammatory d-Peptide Inhibits Disease Phenotype Progression in an ALS Mouse Model

Amyotrophic lateral sclerosis (ALS) is a progressive neurodegenerative disease characterised by selective neuronal death in the brain stem and spinal cord. The cause is unknown, but an increasing amount of evidence has firmly certified that neuroinflammation plays a key role in ALS pathogenesis. Neuroinflammation is a pathological hallmark of several neurodegenerative disorders and has been implicated as driver of disease progression. Here, we describe a treatment study demonstrating the therapeutic potential of a tandem version of the well-known all-d-peptide RD2 (RD2RD2) in a transgenic mouse model of ALS (SOD1*G93A). Mice were treated intraperitoneally for four weeks with RD2RD2 vs. placebo. SOD1*G93A mice were tested longitudinally during treatment in various behavioural and motor coordination tests. Brain and spinal cord samples were investigated immunohistochemically for gliosis and neurodegeneration. RD2RD2 treatment in SOD1*G93A mice resulted not only in a reduction of activated astrocytes and microglia in both the brain stem and lumbar spinal cord, but also in a rescue of neurons in the motor cortex. RD2RD2 treatment was able to slow progression of the disease phenotype, especially the motor deficits, to an extent that during the four weeks treatment duration, no significant progression was observed in any of the motor experiments. Based on the presented results, we conclude that RD2RD2 is a potential therapeutic candidate against ALS.     

Investigation of sulfur release in ETV-ICP-AES and its application for the determination of sulfates

Electrothermal vaporization inductively coupled plasma atomic emission spectrometry was applied to the determination of sulfur species in aqueous solutions. The sensitivity for sulfur as sulfate was found to be depending on the cations in the sample. For understanding this phenomenon the thermal behavior of sulfuric acid, ammonium sulfate and the sulfates of sodium, zinc, magnesium and silver was studied. There were significant differences in the thermal release of sulfur from these sulfates. To explain these phenomena different reaction mechanisms were calculated using thermodynamic data. Pd(NO₃)₂ and Ge in KOH were successfully applied as modifiers for the stabilization of the sulfates during the thermal pre-treatment step and to establish a uniform thermal behavior of different sulfates. The stabilization of sulfur using Ge and Pd as modifiers is based on the reduction of the sulfates in presence of carbon, resulting in the formation of GeS and PdS, respectively. This explanation has been supported by comparing the experimental results with thermodynamic calculations considering different reactions for the thermal decomposition of the sulfates. Applying Ge (in KOH) as modifier the absolute detection limit was 300 pg sulfur (e.g. LOD 30 ng mL^–1). The significant influence of phosphates on the determination of sulfur could be essentially reduced by Pd as modifier. Received: 11 November 1997 / Revised: 14 January 1998 / Accepted: 18 January 1998