Emulsion Copolymerization of Vinyl Acetate and Vinyl Silanes: Kinetics and Development of Microstructure

The batch emulsion copolymerization of vinyl acetate with different vinyl silane functional monomers (vinyl trimethoxysilane [VTMS], vinyl triethoxysilane [VTES], and vinyl silanetriol [VSTO]) is studied. The nature of the silane strongly affects the development of the microstructure and crosslinking ability of the latexes. A combination of techniques (Soxhlet extraction, centrifugation, assymetric‐flow field flow fractionation AF4/MALS/RI) shows that the factor controlling the molar mass and crosslinking density is the degree of hydrolysis of the alkoxysilane, producing higher molar masses and degrees of crosslinking when the degree of hydrolysis is high. Thus, the copolymer containing VSTO produced a very crosslinked latex, the one with VTMS produced a latex with a low degree of crosslinking in the wet state that can yield high degrees of crosslinking upon drying, and the latex with VTES do not produce significant amounts of crosslinking neither before nor after drying.     

Nature of Alkali- and Coinage-Metal Bonds versus Hydrogen Bonds

We have quantum chemically studied the structure and nature of alkali- and coinage-metal bonds (M-bonds) versus that of hydrogen bonds between A−M and B⁻ in archetypal [A−M⋅⋅⋅B]⁻ model systems (A, B=F, Cl and M=H, Li, Na, Cu, Ag, Au), using relativistic density functional theory at ZORA-BP86-D3/TZ2P. We find that coinage-metal bonds are stronger than alkali-metal bonds which are stronger than the corresponding hydrogen bonds. Our main purpose is to understand how and why the structure, stability and nature of such bonds are affected if the monovalent central atom H of hydrogen bonds is replaced by an isoelectronic alkali- or coinage-metal atom. To this end, we have analyzed the bonds between A−M and B⁻ using the activation strain model, quantitative Kohn-Sham molecular orbital (MO) theory, energy decomposition analysis (EDA), and Voronoi deformation density (VDD) analysis of the charge distribution.     

Catalytic Enantioselective Synthesis of N,Cα,Cα‐Trisubstituted α‐Amino Acid Derivatives Using 1H‐Imidazol‐4(5H)‐ones as Key Templates

1H‐Imidazol‐4(5H)‐ones are introduced as novel nucleophilic α‐amino acid equivalents in asymmetric synthesis. These compounds not only allow highly efficient construction of tetrasubstituted stereogenic centers, but unlike hitherto known templates, provide direct access to N‐substituted (alkyl, allyl, aryl) α‐amino acid derivatives.     

Theoretical prediction of the damping of a railway wheel with sandwich-type dampers

This paper presents a procedure for predicting the damping added to a railway wheel when sandwich-type dampers are installed. Although there are different ways to reduce the noise generated by a railway wheel, most devices are based on the mechanism of increasing wheel damping. This is why modal damping ratios are a clear indicator of the efficiency of the damping device and essential when a vibro-acoustic study of a railway wheel is carried out. Based on a number of output variables extracted from the wheel and damper models, the strategy explained herein provides the final damping ratios of the damped wheel. Several different configurations are designed and experimentally tested. Theoretical and experimental results agree adequately, and it is demonstrated that this procedure is a good tool for qualitative comparison between different solutions in the design stages.     

The Influence of N‐Heterocyclic Carbenes (NHC) on the Reactivity of [Ru(NHC)4H]+ With H2, N2, CO and O2

The five‐coordinate ruthenium N‐heterocyclic carbene (NHC) hydrido complexes [Ru(IiPr₂Me₂)₄H][BAr^F₄] ( 1 ; IiPr₂Me₂=1,3‐diisopropyl‐4,5‐dimethylimidazol‐2‐ylidene; Ar^F=3,5‐(CF₃)₂C₆H₃), [Ru(IEt₂Me₂)₄H][BAr^F₄] ( 2 ; IEt₂Me₂=1,3‐diethyl‐4,5‐dimethylimidazol‐2‐ylidene) and [Ru(IMe₄)₄H][BAr^F₄] ( 3 ; IMe₄=1,3,4,5‐tetramethylimidazol‐2‐ylidene) have been synthesised following reaction of [Ru(PPh₃)₃HCl] with 4–8 equivalents of the free carbenes at ambient temperature. Complexes 1 – 3 have been structurally characterised and show square pyramidal geometries with apical hydride ligands. In both dichloromethane or pyridine solution, 1 and 2 display very low frequency hydride signals at about δ ?41. The tetramethyl carbene complex 3 exhibits a similar chemical shift in toluene, but shows a higher frequency signal in acetonitrile arising from the solvent adduct [Ru(IMe₄)₄(MeCN)H][BAr^F₄], 4 . The reactivity of 1 – 3 towards H₂ and N₂ depends on the size of the N‐substituent of the NHC ligand. Thus, 1 is unreactive towards both gases, 2 reacts with both H₂ and N₂ only at low temperature and incompletely, while 3 affords [Ru(IMe₄)₄(η²‐H₂)H][BAr^F₄] ( 7 ) and [Ru(IMe₄)₄(N₂)H][BAr^F₄] ( 8 ) in quantitative yield at room temperature. CO shows no selectivity, reacting with 1 – 3 to give [Ru(NHC)₄(CO)H][BAr^F₄] ( 9 – 11 ). Addition of O₂ to solutions of 2 and 3 leads to rapid oxidation, from which the Ru^III species [Ru(NHC)₄(OH)₂][BAr^F₄] and the Ru^IV oxo chlorido complex [Ru(IEt₂Me₂)₄(O)Cl][BAr^F₄] were isolated. DFT calculations reproduce the greater ability of 3 to bind small molecules and show relative binding strengths that follow the trend CO ? O₂ > N₂ > H₂.     

Geometrothermodynamics of a Charged Black Hole of String Theory

The thermodynamics of the Gibbons–Maeda–Garfinkle–Horowitz–Strominger charged black hole from string theory is reformulated within the context of the recently developed formalism of geometrothermodynamics. The geometry of the space of equilibrium states is curved, but we show that the thermodynamic curvature does not diverge at the phase transition point expected when the black hole solution becomes a naked singularity. This provides a counterexample to the conventional notion that such a divergence signals the occurrence of a second-order phase transition.     

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.     

Correlation between nanohole volume and mechanical properties of amine‐cured epoxy resin blended with poly(ethylene oxide)

A set of diglycidylether of bisphenol‐A (DGEBA)/4,4′‐diaminodiphenylmethane (DDM) epoxy matrix modified with poly(ethylene oxide) (PEO), pre‐cured at two different temperatures, was examined by positron annihilation lifetime spectroscopy (PALS). The aim was to investigate the correlation between local free volume and mechanical properties. A negative deviation from the linear additivity rule of the local free volume is observed at both cure schedules. Using together the local free volume and mechanical results allows to conclude that the cure temperature makes small contribution to the flexural strength and modulus of blends but is responsible for the composition‐dependent rise of the fracture toughness. It is proposed that this behavior is a consequence of the nearest‐neighbor intrachain contacts or self‐association of the epoxy‐OH groups during cure leading to a non‐uniform space distribution of the DGEBA–PEO contacts, which causes the deflection of the crack path. Copyright © 2008 John Wiley & Sons, Ltd.