A liquid chromatography coupled to quadrupole–time-of-flight–mass spectrometry (LC–QTOF–MS) method for identification analysis of saponins from Quillaja saponaria bark extracts in foot-and-mouth disease vaccines: Development,validation and applicability

Saponins from Quillaja saponaria have been commonly used as immunomodulatory adjuvants in foot-and-mouth disease vaccines (FMDVs). However, due to the lack of consensus over the possible exacerbation of local inflammatory responses in cattle and its economic impacts, their use has been discouraged by Brazilian authorities. A qualitative method intended to determine the presence of saponins from Q. saponaria bark extracts in FMDVs was developed and validated. Instrumental analysis was performed using an liquid chromatography (LC) coupled to a quadrupole–time-of-flight–mass spectrometry (TOF-MS) system. The method was validated according to the International Conference on Harmonization Harmonized Tripartite Guideline Q2 (R1) and Brazilian Ministry of Agriculture, Livestock and Food Supply Analytical Quality Assurance Guidelines. Validation parameters were determined and considered suitable to the established criteria. The validated method has been applied in routine analysis in the National Agricultural Laboratory at Rio Grande do Sul (LANAGRO-RS). All results obtained were in agreement with the vaccine's composition described by the manufacturer. The method is easy and adequate for analysis in routine laboratories. To the best of the authors' knowledge, this is the first report of a method which intends to investigate the presence of saponins from Q. saponaria bark extracts in veterinary vaccines.     

Biological and Catalytic Applications of Pd(II)-Indenyl Complexes Bearing Phosphine and N-Heterocyclic Carbene Ligands

A general synthetic entryway into novel cationic Pd(II) indenyl complexes bearing one alkyl/aryl phosphine and one N-heterocyclic carbene is reported. All metal complexes have been exhaustively characterized by spectroscopic and structural analyses, highlighting that the indenyl fragment has an hapticity intermediate between η³ and η⁵. Most of the target complexes are stable in solid state and in solution for a long time. Two different applications of these organopalladium compounds are proposed. Firstly, they have been tested as antiproliferative agents towards three different ovarian cancer cell lines, showing a cytotoxicity significantly higher than that of cisplatin, with a clear dependence on the nature of the coordinated phosphine. Moreover, the similar cytotoxicity towards cisplatin-sensitive and cisplatin-resistant cell lines suggests that these new palladium derivatives act with a different mechanism of action with respect to classical platinum-based drugs. Finally, the water-soluble palladium complexes bearing 1,3,5-triaza-7-phosphaadamantane (PTA) have demonstrated interesting catalytic performances in Suzuki–Miyaura coupling in aqueous media, being, inter alia, readily and efficiently recyclable.     

Biomimetic complexes of Cd(II), Mn(II), and Zn(II) with 1,1-diaminobutane–Schiff base. EGA/MS study of the thermally induced decomposition

Russian Journal of General Chemistry - Frequently, in addition to X-ray and spectroscopic approaches, thermal analysis is the method of choice for comprehensive characterization of precipitated...     

Stability Monitoring of Electrolytic Conductivity Reference Materials Under Repeated Use Conditions by the Primary Measurement Method

This work presents the results from stability studies for several electrolytic conductivity (EC) reference materials submitted to repeated use conditions, as required by the last version of the ISO 17034 standard. Eight batches of reference materials, composed of water or water/n-propanol and HCl or KCl (at different concentrations), were studied, with nominal EC values ranging from 5 to 12,825 µS·cm−1. The materials were submitted to a simulation of repeated use, with the manipulation of bottles once a week and their storage under refrigeration with air gaps inside them. They were then analyzed once a month by the EC primary measurement method. The measurement results were evaluated to check for deviations from conventional long-term stability monitoring and for variation trends using normalized error and linear regression statistical tests. The results indicated that the repeated use simulation caused deviations in the EC for the 100 and 500 µS·cm−1 reference materials and variation trends in the EC for the 5000 and 12,825 µS·cm−1 reference materials. From the results, the uncertainty related to stability monitoring under repeated use conditions was calculated for each reference material.     

Tailoring the morphology and properties of waterborne polyurethanes by the procedure of cellulose nanocrystal incorporation

Polyurethane waterborne synthesis was performed using a two-step method, commonly referred to as a prepolymer method. Nanocomposites based on waterborne polyurethane and cellulose nanocrystals were prepared by the prepolymer method by altering the mode and step in which the nanofillers were incorporated during the polyurethane formation. The morphology, structural, thermal, and mechanical properties of the resulting nanocomposite films were evaluated by Fourier transform infrared spectroscopy (FTIR), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and tensile tests. FTIR results indicated that the degree of interaction between the nanofillers and the WPU through hydrogen bonds could be controlled by the method of cellulose nanocrystal incorporation. Data obtained from SAXS experiments showed that the cellulose nanocrystals as well as the step of the reaction in which they are added influenced the morphology of the polyurethane. The reinforcing effect of CNCs on the nanocomposites depends on their morphology.     

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.     

Photophysical properties of a series of 4‐aryl substituted 1,4‐dihydropyridines

In this article, a series of Hantzsch 1,4‐dihydropyridines with different substituted aryl groups were synthesized and its spectral data obtained by UV–Vis absorption and fluorescence emission spectroscopies in solution. The dihydropyridines present absorption located around 350 nm and fluorescence emission in the blue–green region. A higher Stokes’ shift could be observed for the derivative 3b because of an intramolecular charge transfer in the excited state from the dimethylaniline to the dihydropyridine chromophores, which was corroborated by a linear relation of the fluorescence maxima (ν_max) versus the solvent polarity function (Δf) from the Lippert–Mataga correlation. A comparison between the experimental data and time‐dependent density functional theory‐polarizable continuum model calculations of the vertical transitions was performed to help on the elucidation of the photophysics of these compounds. For these calculations, the S₀ and S₁ states were optimized using Becke, three‐parameter, Lee–Yang–Parr/6‐31 G* and Configuration Interaction Singles/6‐31 G*, respectively. The predicted absorption maxima are in good agreement with the experimental; however, the theoretical fluorescence emission maxima do not match the experimental, which means that the excited specie cannot be related to neither a locally excited state nor to an aromatized structure. Copyright © 2012 John Wiley & Sons, Ltd.