血清一阶导数荧光光谱诊断早期恶性肿瘤

利用Wistar大鼠接种恶性肉瘤模拟人患上癌症。取Wistar大鼠眼静脉血制备血清,并用乙醇简单处理得上层清液,扫描获得其一阶导数荧光光谱,确定上层清液原卟啉发射带(630 nm附近)的峰高,观察到健康Wistar大鼠与癌变大鼠的血清样存在明显差异,10例癌变样假阳性率为0,而20例正常样中仅有1例假阳性达到了恶性肿瘤早期诊断的目的。     

Pyrolysis Process of Plant Fibers北大核心CSCD

The natural plant fiber has a large molecular weight and complex structure and composition,and its thermal cracking products and the composition distribution are also more complex. The fast pyrolysiscomprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry（Py-GC×GC-TOF/MS）,thermogravimetry-Fourier transform infrared spectroscopy（TG-FT-IR）,and in situ Fourier transform infrared spectroscopy（in situ FT-IR）methods were used to study the thermal pyrolysis process of six different natural fibers. The distribution of thermal pyrolysis products of different fibers under different pyrolysis temperatures was investigated and the product form was fully discussed. The research results show that the products of fiber pyrolysis mainly include alcohols,aldehydes,ketones,acids,esters,hydrocarbons, dehydrated sugars and CO2,etc. The types of pyrolysis products of different natural plant fibers are obviously different,and the main product types obtained are all different. At the same time,the results of in situ infrared spectroscopy and mass spectrometry show that pyrolysis products are closely related to the pyrolysis temperature. The results of in situ infrared experiments show that when the pyrolysis temperature is lower than 100 °C,the adsorbed water on the surface of the fiber structure is desorbed,but the fiber structure does not change significantly. When the pyrolysis temperature range is 100~200 °C,the temperature has little effect toward the pyrolysis process. When the temperature exceeds 300 °C,the fiber pyrolysis reaction intensifies and the surface structure changes significantly,and the main products are aldehydes and ketones. © 2022, Science Press (China). All rights reserved.     

分散固相萃取/气相色谱-三重四极杆串联质谱法检测纸张中的20种芳香胺

建立了纸张中的20种芳香胺的分散固相萃取/气相色谱-三重四极杆串联质谱分析方法。纸张中的偶氮染料于(70±2)℃经预处理后还原为芳香胺,向反应后的悬浮液中先加入4 mL 10 mol/L氢氧化钠溶液,将pH值由弱酸性调至碱性,再加入0.5 mL的3内标(氘代萘、2,4,5-三氯苯胺和氘代蒽)工作溶液、10 mL的叔丁基甲醚,最后加入15 g无水硫酸钠除水,振摇40 min萃取芳香胺。萃取液经分散固相萃取试剂盒(d-SPE)进一步净化、离心后,取上层清液以气相色谱-三重四极杆串联质谱法(GC-MS/MS),在多反应离子监测(MRM)模式下检测,内标法定量。目标物在各自浓度范围内线性关系良好(r~20.99),在10、20、50 ng/mL 3个加标水平下的回收率为80.7%～128%,相对标准偏差(RSDs)为0.79%～6.5%,检出限(LOD)为0.05～2.1 ng/mL,定量下限(LOQ)为0.18～5.5 ng/mL。该方法简便快捷,灵敏度高,可用于纸张中芳香胺的快速检测。     

连续流动分析法测定电子烟烟液中的烟碱

称取电子烟烟液样品0.100 0g于25mL具盖离心管中,加入15%(体积分数)异丙醇溶液10mL,溶解混合,静置后作为样品溶液。如果在静置过程中出现不完全混溶现象,可将离心管置于涡旋振荡器内,以5 000转·min~(-1)的转速振荡1min,离心后,取澄清液体作为样品溶液。用连续流动分析仪测定样品溶液在波长460nm处的吸光度。烟碱的质量浓度在10.0～500mg·L~(-1)内与其对应的吸光度呈线性关系,测定下限(10s)为1.5mg·L~(-1)。方法用于测定市售电子烟烟液中的烟碱,测定值与标记值基本相符,加标回收率在99.5%～101%之间,测定值的相对标准偏差(n=6)为0.66%。