Cucurbit[10]uril

Melamine diamine 1 is able to displace CB[5] from the CB[10].CB[5] complex resulting in CB[10].12 and precipitated CB[5].1. We were able to isolate free CB[10] by treatment of CB[10].1 with acetic anhydride followed by washing with MeOH, DMSO, and water. The spacious cavity of CB[10] is able to complex large guests, including a cationic calix[4]arene derivative in its 1,3-alternate form (CB[10].1,3-alt-3). The addition of adamantane carboxylic acid (4) to CB[10].3 triggers a conformational change during the formation of termolecular complex CB[10].cone-3.4.     

结晶聚合物的辐射效应：多官能团单体对LDPE的结晶成核作用

根据x射线、电镜、DSC和凝胶分数的测试结果,讨论了多官能团单体结构对低密度聚乙烯聚集态结构的影响以及结晶度与辐射交联(或剂量)的关系。发现由于单体的存在导致低密度聚乙烯结晶度增加而结晶尺寸变小(即结晶成核效应);成核效应越大,增强辐射交联的效果也越大。添加具有高结晶成核作用的单体有利于低密度聚乙烯的辐射交联,同时也加速其结晶结构的破坏。     

Hydroxyl radical probe of the calmodulin-melittin complex interface by electrospray ionization mass spectrometry

The calcium-dependent interaction of calmodulin and melittin is studied through the application of a radical probe approach in which solutions of the protein and peptide and protein alone are subjected to high fluxes of hydroxyl and other oxygen radicals on millisecond timescales. These radicals are generated by an electrical discharge within an electrospray ion source of a mass spectrometer. Condensation of the electrosprayed droplets followed by proteolytic digestion of both calmodulin and melittin has identified residues in both which participate in the interaction and/or are shielded from solvent within the protein complex. Consistent with other theoretical models and available experimental data, the tryptophan residue of melittin at position 19 is shown to be critical to the formation of the complex with the C-terminal domain of peptide enveloped by and protected from oxidation upon binding to the protein. Furthermore, the N-terminal domain (to residue 36) and tyrosine at position 99 in calmodulin are significantly protected from limited oxidation upon the binding of melittin while exposing the phenylalanine residue at position 92 of the flexible loop domain. The N-terminus (through residue 36) of calmodulin is shown to lie in closer proximity to the melittin helix than its C-terminal counterpart (residues 127-148) based upon the protection levels measured at reactive residues within these segments of the protein.     

The inverted cucurbit[n]uril family

We report the isolation, characterization, and recognition behavior of iCB[6] and iCB[7], which are diastereomers of CB[6] and CB[7], respectively, containing a single inverted glycoluril unit. Product resubmission experiments establish that these inverted CB[n] are intermediates in the mechanism of CB[n] formation. As a consequence of the inverted glycoluril ring, these inverted cucurbiturils possess a permanent dipole moment, are slightly smaller than their diastereomers, show distinctive selectivity in their recognition behavior, and report directly on the contents of their hydrophobic cavity.     

“受阻路易斯酸碱对”催化的2,3-二取代2H-1,4-苯并噁嗪氢化反应机理研究

在受阻路易斯酸碱对（FLPs）催化的2，3-二取代2H-1，4-苯并噁嗪氢化反应中，3号位取代基不同会导致反应效率极大改变，因此我们选取反应活性具有较大差别的三种底物作为模型化合物对其反应机理进行了研究，建立了氢化反应势能面.发现当B（C₆F₅）₃与2，3-二苯基2H-1，4-苯并噁嗪或2-甲基-3-苯基2H-1，4-苯并噁嗪混合后，会形成FLPs与路易斯酸碱加合物的混合物.而将B（C₆F₅）₃与2，3-二甲基2H-1，4-苯并噁嗪混合后主要形成没有催化活性的路易斯酸碱加合物，因其能量低于FLPs，在催化体系中不容易转化为FLPs，这导致三种模型化合物在FLPs催化的氢化反应中效率不同.进一步的取代基电子效应及位阻效应计算表明：B（C₆F₅）₃与2-甲基-3-取代2H-1，4-苯并噁嗪混合后形成的路易斯酸碱加合物和FLPs化合物之间稳定性差别源于3位取代基空间位阻不同.     

Achieving Enhanced Photochromic Properties of Diarylethene through Host-Guest Interaction in Aqueous Solution

Diarylethene (DTE) has been widely used in fluorescence probes, molecular logic gates, optical data-storage devices owing to the excellent photochromic property, while constructing high-performance photochromic DTE in aqueous media remains a big challenge. Herein we present several host-guest systems formed between cucurbit[n]uril (CB[n], n=7, 8, 10) and two water-soluble DTE derivatives 1 and 2 . It was found that host-guest interactions not only affect the photophysical properties of photochromic guests, but also make great differences on the photoreaction process. Different host-guest binding behaviors also lead to different effects on the photochromic properties of guests. In the presence of CB[n], both 1 and 2 showed enhanced emission and higher fluorescence quenching ratio at photostationary state. Besides, CB[10] ⋅1 exhibited faster response rate in cyclization reaction and better photofatigue resistance than free 1 in aqueous solution, while the supramolecular assembly of (CB[8])_n ⋅ ( 2 )_n showed slower response rate in both directions of the reversible photoreaction. Besides, the photofatigue resistance of 2 can be greatly improved through binding with CB[7]. Our results suggest that host-guest interactions could be an efficient way to improve photochromic properties of DTE in aqueous solution.     

Improved λ/4 phase-shifted DFB semiconductor laser with spatial hole burning compensation using grating chirp

A λ/4 phase-shifted distributed feedback (DFB) semiconductor laser with a preformed chirped grating used to compensate the spatial hole burning (SHB) induced index change is proposed and analyzed. It shows that compared with the three phase shifted DFB laser which is known for its good performance to eliminate SHB, the proposed SHB compensated laser has better single longitudinal mode property, narrower spectral linewidth and better dynamic characteristics.     

β-Cyclodextrin conjugated magnetic nanoparticles as a novel magnetic microvessel and phase transfer catalyst: synthesis and applications in nucleophilic substitution reaction of benzyl halides

This paper presents a feasible protocol for the preparation of β-cyclodextrin conjugated Fe₃O₄ magnetic nanoparticles as an efficient microvessel and host system for nucleophilic substitution reaction of benzyl halides in water. No evidence for the formation of by-product for example isothiocyanate or benzyl alcohol was observed and the products were obtained in pure form without further purification. The characteristics results of FT-IR, XRD, TGA and SEM shows that β-CD is grafted onto Fe₃O₄ nanoparticles. The nanomagnetic catalyst could be readily separated from solution via application of an external magnet, allowing straightforward recovery and reuse.     

Mesoporous interstitial and substitutional nitrogen-containing titanium dioxide photocatalysts prepared by acid-assisted sol–gel procedure

Two different types of nitrogen-containing TiO₂ were synthesized via an acid-modified sol–gel method. Yellow-colored interstitial and white substitutional nitrogen-containing TiO₂ powders were characterized by means of X-ray diffraction, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller specific surface area and Barrett–Joyner–Halenda pore size distribution analyses, scanning electron microscopy, transmission electron microscopy and UV–vis absorption spectroscopy. The band gaps of interstitial and substitutional nitrogen-containing TiO₂ ceramics were estimated from UV–vis spectroscopy data to be 2.6 and 2.8 eV, respectively. Prepared substitutional nitrogen-containing TiO₂ featured steep light absorption edge with an approximately parallel characteristic to that in pure TiO₂. This fact is due to band-to-band visible light absorption ability of substitutional nitrogen-containing TiO₂. The photocatalytic properties of the produced nitrogen-containing TiO₂ samples were compared for the degradation of Direct Red 28 azo dye. Further studies were also devised to compare the catalytic efficiency of the nitrogen-containing TiO₂ powders with the pure TiO₂ synthesized via the similar sol–gel method. The produced nitrogen-containing TiO₂ samples revealed superior photocatalytic properties in comparison with pure TiO₂ due to their remarkable band gap narrowing, surface oxygen vacancies and much more surface defects. The results also revealed that the substitutional nitrogen-containing TiO₂ is the most effective photocatalyst under ultraviolet and visible light irradiation.