Multiferroic TbMnO3 nanoparticles

We report on the synthesis of TbMnO₃ nanoparticles by chemical co-precipitation route and their structural, chemical bonding, magnetic and dielectric properties. It is shown that the interesting multiferroic properties of this system as reflected by the concurrent occurrence of magnetic and dielectric transitions are retained in the nanoparticles (size∼40 nm). However, the nanoparticle constitution and properties are seen to depend significantly on the calcination temperature. While the nanoparticles obtained by calcination at 800 °C correspond very well with the reported properties of single phase TbMnO₃ (all the key magnetic and dielectric features near 7, 27 and 41 K, albeit with reduced dielectric constant) the nanoparticles obtained by calcination at 900 °C develop a Tb deficient skin which softens the transitions, reducing the dielectric constant further.     

Miscibility of PVC/PMMA blends by vicat softening temperature, viscometry, DSC and FTIR analysis

 This paper deals with the miscibility of polyvinyl chloride (PVC) with polymethyl methacrylate (PMMA). Blends of variable compositions from 0 to 100 wt% were prepared in the presence (15, 30 and 50 wt%) and in the absence of di ethyl- 2 hexyl phtalate as plasticizer. Their miscibility was investigated by using various analytical methods: determination of the Vicat softening temperature, a viscometry method based on the criterion of polymer–polymer miscibility, differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The results show that the plot of Vicat temperature against composition is a continuous curve, indicating the miscibility of the blend. The viscometry method and DSC find that the two polymers are miscible up to about 60 wt% of PMMA. This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC, as evidenced by FTIR spectroscopy. The two-band deconvolution shows an increase in associated groups percentage in the domain of miscibility.     

Electrosynthesis,characterization and photoconducting performance of copolymer poly(terthiophene + sexithiophene + TiO<Subscript>2</Subscript>)/ITO composite material

In the present work, a new composite material poly(3T + 6T + TiO₂) was electrochemically synthesized. This composite material was synthesized in a solution of (CH2Cl2/TBAP) containing the monomers (terthiophene), (sexithiophene) and semiconductor (TiO₂) particles. The preparedsamples were characterized electrochemically by cyclic voltamperometry (CV) and spectrometry analysis by scanning electron microscopy (SEM), ultraviolet-visible (UV-Vis) absorption spectroscopy, energy dispersive X-ray spectroscopy (EDX) and fourier transform infrared spectroscopy (FTIR), respectively. The effect of TiO₂ concentration in the solution on dispersed microparticle entity and on the photocurrent response was investigated. The results showed that TiO₂ particles were dispersed and codeposited into the copolymer poly(3T + 6T + TiO₂) matrix, and titanium atom was confirmed by EDX spectra. From SEM images, the TiO₂ has a spherical shape and micrometer size. The FTIR spectrum indicated that titanium dioxide do not show a significant modification in terms of band shape and no interaction between polymers and TiO₂ particles. Furthermore, the results showed that the composite films with different amounts of TiO₂ exhibit good photocurrent properties which imply that these composites films can be used in various fields, such as photoelectrochemical applications as photovoltaic cells.     

In vivo estimation of optical properties of rat liver using single-reflectance fiber probe during ischemia and reperfusion

Optical Review - To quantify the changes in optical properties of in vivo rat liver tissue, we applied diffuse reflectance spectroscopy (DRS) system using single-reflectance fiber probe during...     

Evaluation of a novel nanocrystalline hydroxyapatite powder and a solid hydroxyapatite/Chitosan-Gelatin bioceramic for scaffold preparation used as a bone substitute material

Artificially fabricated hydroxyapatite (HAP) shows excellent biocompatibility with various kinds of cells and tissues which makes it an ideal candidate for a bone substitute material. In this study, hydroxyapatite nanoparticles have been prepared by using the wet chemical precipitation method using calcium nitrate tetra-hydrate [Ca(NO₃)₂.4H₂O] and di-ammonium hydrogen phosphate [(NH₄)₂ HPO₄] as precursors. The composite scaffolds have been prepared by a freeze-drying method with hydroxyapatite, chitosan, and gelatin which form a 3D network of interconnected pores. Glutaraldehyde solution has been used in the scaffolds to crosslink the amino groups (|NH₂) of gelatin with the aldehyde groups (|CHO) of chitosan. The X-ray diffraction (XRD) performed on different scaffolds indicates that the incorporation of a certain amount of hydroxyapatite has no influence on the chitosan/gelatin network and at the same time, the organic matrix does not affect the crystallinity of hydroxyapatite. Transmission electron microscope (TEM) images show the needle-like crystal structure of hydroxyapatite nanoparticle. Scanning Electron Microscope (SEM) analysis shows an interconnected porous network in the scaffold where HAP nanoparticles are found to be dispersed in the biopolymer matrix. Fourier transforms infrared spectroscopy (FTIR) confirms the presence of hydroxyl group (OH^-) , phosphate group (PO^3-₄) , carbonate group (CO^2-₃) , imine group (C=N), etc. TGA reveals the thermal stability of the scaffolds. The cytotoxicity of the scaffolds is examined qualitatively by VERO (animal cell) cell and quantitatively by MTTassay. The MTT-assay suggests keeping the weight percentage of glutaraldehyde solution lower than 0.2%. The result found from this study demonstrated that a proper bone replacing scaffold can be made up by controlling the amount of hydroxyapatite, gelatin, and chitosan which will be biocompatible, biodegradable, and biofriendly for any living organism.     

Elaboration and characterisation of a plasticized cellulose triacetate membrane containing trioctylphosphine oxyde (TOPO): Application to the transport of uranium and molybdenum ions

A cellulose triacetate (CTA) membrane containing trioctylphosphine oxyde (TOPO) as carrier and 2-nitrophenyloctyl ether (NPOE) as a plasticizer was prepared. The membrane CTA + NPOE + TOPO was characterised using chemical techniques as well as Fourier Transform InfraRed (FTIR) spectroscopy, X-ray diffraction and Scanning Electron Microscopy (SEM). The CTA membrane is characterised by well-defined pores; these pores are completely filled with the NPOE and carrier. Surfaces of membranes with TOPO are smooth. The systems constituted by the mixture of CTA + NPOE, CTA + NPOE + TOPO do not give any diffraction. This can be due to the absence of crystallization within the membrane. On the other hand, this result should be attributable to the amorphous state of the structure, which permits us to eliminate the mechanism of transfer of the ions by electron jump. A comparative study of transport across a polymer inclusion membrane (PIM) and a supported liquid membrane (SLM) containing the same carrier in chloroform has shown that uranium or molybdenum transport efficiency was increased using PIM instead of SLM. PIM showed higher stability than SLM, the flux of transport remain constant in the former case after 2 weeks.     

Impedance spectroscopy and conductometric biosensing for probing catalase reaction with cyanide as ligand and inhibitor

In this work, a new biosensor was prepared through immobilization of bovine liver catalase in a photoreticulated poly (vinyl alcohol) membrane at the surface of a conductometric transducer. This biosensor was used to study the kinetics of catalase–H₂0₂ reaction and its inhibition by cyanide. Immobilized catalase exhibited a Michaelis–Menten behaviour at low H₂0₂ concentrations (< 100 mM) with apparent constant K_M^app = 84 ± 3 mM and maximal initial velocity V_M^app = 13.4 μS min^? 1. Inhibition by cyanide was found to be non-competitive and inhibition binding constant K_i was 13.9 ± 0.3 μM. The decrease of the biosensor response by increasing cyanide concentration was linear up to 50 μM, with a cyanide detection limit of 6 μM. In parallel, electrochemical characteristics of the catalase/PVA biomembrane and its interaction with cyanide were studied by cyclic voltammetry and impedance spectroscopy. Addition of the biomembrane onto the gold electrodes induced a significant increase of the interfacial polarization resistance R_P. On the contrary, cyanide binding resulted in a decrease of Rp proportional to KCN concentration in the 4 to 50 μM range. Inhibition coefficient I₅₀ calculated by this powerful label-free and substrate-free technique (24.3 μM) was in good agreement with that determined from the substrate-dependent conductometric biosensor (24.9 μM).     

A new solid phase micro extraction for simultaneous head space extraction of ultra traces of polar and non-polar compounds

The results of the innovative study on a new stationary phase with high efficiency based on ZnO nano and micro rod coating on fused silica are reported in this paper. ZnO nanorods with a diameter in the range of 70–300 nm and the length of about 500 nm, have been grown on fused silica fibers using a hydrothermal process. The extraction properties of the fiber were investigated using headspace solid-phase microextraction (HS-SPME) mode coupled with gas chromatography–mass spectrometry detection (GC–MS) for 1,4-dichloro-nitrobenzene, biphenyl and acenaphthene. The calibration curves were linear up to 10²–10⁷ ng L⁻¹ (R² > 0.995) with detection limits of 10⁻³ ng L⁻¹ for biphenyl and acenaphthene and 10 ng L⁻¹ for 1,4-dichloro-nitrobenzene. The RSD for single fiber and fiber-to-fiber were less than 7.0 and 11.5%, respectively. The high stability of the ZnO coating is proved at relatively high temperatures (up to 300 °C) with a high extraction capacity and long lifespan (more than 100 times). Promising recoveries (91–102%) were obtained in environmental water samples analysis by applying the proposed technique.     

Pd(0) supported onto monolithic polymers containing IL-like moieties. Continuous flow catalysis for the Heck reaction in near-critical EtOH

Long-term stable Pd(0) catalysts can be easily supported onto polymeric monoliths containing methyl-imidazole moieties and the corresponding reactors based on these materials can be applied for the continuous Heck reaction in near-critical EtOH.