TEM investigations on PECVD-titanium carbide layers

TiC_x-PECVD-layers were characterized by TEM. EDX analysis and electron diffraction. TiC_x-layers deposited using benzene showed a columnar structure, at which the column size decreases with rising excess carbon content. TiC_x-layers deposited using n-heptane presented a lamellar structure, at which the lamellar thickness diminishes with an increasing excess carbon content. In dependence on the layer thickness a periodic progress of the element contents was observed, at which a maximum for Ti and Cl correlates with a minimum for C. It was found that the incorporated chlorine is bonded to titanium. The lattice parameter depends on the chlorine content. Using TiCl₄/H₂/Ar-gas mixtures without any hydrocarbon, layers containing TiH₂ are formed.     

Isolation and Structural Characterization of Di‐ and Tetra‐protonated Forms of the Macrocyclic Hexaamine trans‐6,13‐Dimethyl‐1,4,8‐11‐tetraazacyclodecane‐6,13‐diamine

Cations derived by protonation of the ligand title compound (L¹) have been structurally characterized in their di‐ and tetra‐ protonated forms in the salts [H₂L¹][ClO₄]₂·2H₂O and [H₄L¹][ZnCl₄]₂·4H₂O. In both structures, one half of the formula unit comprises the asymmetric unit of the structure, the macrocycle being centrosymmetric, with the two macrocycles adopting similar conformations. In both salts, a pair of diagonally opposed macrocyclic secondary amine groups are protonated; in the [H₄L¹]⁴⁺ salt, the additional pair of protons are accommodated on the exocyclic pendant amine groups. The dispositions of the pendent amines differ between the two structures, being ‘equatorial’ with respect to the macrocyclic ring in the [H₂L¹]²⁺ salt, and ‘axial’ in the [H₄L¹]⁴⁺ salt. In other structurally characterized compounds containing [H₄L¹]⁴⁺ the equatorial disposition was found in the ferricyanide adduct, while in the tetraperchlorate salt the axial disposition was identified. The differences in disposition of the exocyclic groups are ascribed to the extensive H‐bonding in the lattices.     

Quantitative analysis of perchlorate in extracts of whole fish homogenates by ion chromatography: comparison of suppressed conductivity detection and electrospray ionization mass spectrometry

The perchlorate anion (ClO ₄ ^– ) is an anthropogenic contaminant of increasing concern in water supplies, and has been shown to disrupt thyroid activity. Most perchlorate analyses are currently carried out by ion chromatography (IC) with suppressed conductivity detection (SCD). While this procedure has been demonstrated to provide acceptable performance for analysis of water samples, the determination of perchlorate in high-conductivity aqueous extracts of plant or animal material is not readily accomplished by IC-SCD unless lengthy cleanup protocols are applied. With the addition of electrospray ionization mass spectrometry (ESI-MS) to IC, it was hypothesized that the interference imposed by various ionic species could be significantly reduced without the need for purification; however, the analysis of perchlorate in relatively unpurified extracts of biologically derived homogenates by IC-ESI-MS has not previously been described in the literature. The research presented here represents a comparison of the capabilities of IC-SCD and IC-ESI-MS to detect perchlorate in reagent water and in crude extracts of perchlorate-exposed fish (threespine stickleback, Gasterosteus aculeatus). ESI-MS was found to compare favorably to SCD for the detection of perchlorate in deionized water, and to exceed SCD performance in perchlorate analysis of fish-derived extracts.     

Ozonation of pyrene and benzo[a]pyrene in silica and soil –14C-mass balances and chemical analysis of oxidation products as a first step to ecotoxicological evaluation

Ozonation of polycyclic aromatic hydrocarbons (PAHs) in soil is a process that can be used for in-situ soil remediation or in combination with bioremediation techniques. First steps to a comprehensive ecotoxicological evaluation of this method is done by ozonation of radioactively labeled (¹⁴C) pyrene and benzo[a]pyrene in a silty soil (LUFA 2.2) under mass-balancing conditions and GC-MS analysis of aromatic ozonation products. ¹⁴C-Mass-balances for pyrene and benzo[a]pyrene (b[a]p) in soil showed that, apart from ¹⁴CO₂ formation, considerable percentages of both PAHs are oxidized to water soluble substances (20–30%) or to non-extractable or bound residues (10% for pyrene, 30% for b[a]p). TLC and GC-MS analysis of ozonation products extractable from artificially contaminated silica and soil by organic solvents revealed a large number of aromatic substances. PAH-quinones and ten ring fission products with formyl- and carboxy-groups of both pyrene and b[a]p could be identified.     

Electron binding energies of aqueous alkali and halide ions: EUV photoelectron spectroscopy of liquid solutions and combined ab initio and molecular dynamics calculations

Photoelectron spectroscopy combined with the liquid microjet technique enables the direct probing of the electronic structure of aqueous solutions. We report measured and calculated lowest vertical electron binding energies of aqueous alkali cations and halide anions. In some cases, ejection from deeper electronic levels of the solute could be observed. Electron binding energies of a given aqueous ion are found to be independent of the counterion and the salt concentration. The experimental results are complemented by ab initio calculations, at the MP2 and CCSD(T) level, of the ionization energies of these prototype ions in the aqueous phase. The solvent effect was accounted for in the electronic structure calculations in two ways. An explicit inclusion of discrete water molecules using a set of snapshots from an equilibrium classical molecular dynamics simulations and a fractional charge representation of solvent molecules give good results for halide ions. The electron binding energies of alkali cations computed with this approach tend to be overestimated. On the other hand, the polarizable continuum model, which strictly provides adiabatic binding energies, performs well for the alkali cations but fails for the halides. Photon energies in the experiment were in the EUV region (typically 100 eV) for which the technique is probing the top layers of the liquid sample. Hence, the reported energies of aqueous ions are closely connected with both structures and chemical reactivity at the liquid interface, for example, in atmospheric aerosol particles, as well as fundamental bulk solvation properties.     

Macrocyclic cobalt(III) complexes as precursors for metal-polythiophene hybrid materials

A thiophene-functionalised macrocyclic ligand trans-6,13-dimethyl-6-((thiophen-3-ylmethyl)amino)-1,4,8,11-tetraazacyclotetradecane-13-amine (L¹) has been prepared and complexed with Co^III. The ligand L¹ binds as a pentadentate in the crystallographically characterised complexes [CoL¹(OAc)](ClO₄)₂ and [CoL¹Cl]Cl₂. Electro-copolymerisation of [CoL¹Cl]Cl₂ with 3,4-ethylenedioxythiophene (EDOT) in a 1:2 ratio on a preformed poly-3,4-ethylenedioxythiophene (PEDOT) film resulted in metal–polymer hybrid films of high quality, consistency and uniformity in appearance. The copolymerised films were characterised by XPS indicating a 1:11 ratio of incorporation of complex to EDOT. Electrochemistry of the Co-PEDOT film (cast on an indium-doped tin oxide working electrode) in water revealed a Co^III/II redox couple at a potential ca. −600 mV (vs Ag/AgCl) which is similar to that seen in solution for the monomeric aqua complex [CoL¹(OH₂)]³⁺.     

The non-selective voltage-activated cation channel in the human red blood cell membrane: reconciliation between two conflicting reports and further characterisation

Using the patch-clamp technique, the non-selective, voltage-activated cation channel in the human red blood cell (RBC) membrane was further characterised. Activity of the cation channel could be demonstrated at a range of salt concentrations with the current-voltage characteristics for monovalent cations going from linear to superlinear functions, depending on the cation concentration in the range of 100-500 mM. The non-selective voltage-activated cation channel was demonstrated to be permeable to the divalent cations Ca2+ and Ba2+, and even Mg2+. The current-voltage relations for the divalent cations were superlinear even at 75 mM salt concentration, but indicated outward rectification in contrast to the I-V curve for monovalent cations. The degree of activation at a given membrane potential depended strongly on the prehistory of the channel. The gating exhibited hysteretic-like behaviour, since the quasi steady-state deactivation and activation curves were displaced by approximately 25 mV. This result fully explains apparent discrepancies between V0.5-values previously obtained by slightly different experimental protocols. The possible physiological/pathophysiological role of the channel is discussed in the context of the demonstrated permeability for divalent cations.     

A comprehensive two-dimensional map of cytosolic proteins of Bacillus subtilis

Proteomics relying on two-dimensional (2-D) gel electrophoresis of proteins followed by spot identification with mass spectrometry is an excellent experimental tool for physiological studies opening a new perspective for understanding overall cell physiology. This is the intriguing outcome of a method introduced by Klose and O'Farrell independently 25 years ago. Physiological proteomics requires a 2-D reference map on which most of the main proteins were identified. In this paper, we present such a reference map with more than 300 entries for Bacillus subtilis proteins with an isoelectric point (pI) between 4 and 7. The most abundant proteins of exponentially growing cells were compiled and shown to perform mainly housekeeping functions in glycolysis, tricarboxylic acid cycle (TCC), amino acid biosynthesis and translation as well as protein quality control. Furthermore, putative post-translational modifications were shown at a large scale, with 47 proteins in total forming more than one spot. In a few selected cases evidence for phosphorylation of these proteins is presented. The proteome analysis in the standard pI range was complemented by either stretching the most crowded regions in a narrow pH gradient 4.5-5.5, or by adding other fractions of the total B. subtilis proteome such as alkaline proteins as well as extracellular proteins. A big challenge for future studies is to provide an experimental protocol covering the fraction of intrinsic membrane proteins that almost totally escaped detection by the experimental procedure used in this study.     

Novel one-dimensional structures and solution behaviour of copper(II) bromide and chloride complexes of a new pentapyridyldiamine ligand

Copper(II) bromide and chloride complexes of the new heptadentate ligand 2,6-bis(bis(2-pyridylmethyl)amino)methylpyridine (L) have been prepared. For the bromide complexes, chains of novel, approximately C2-symmetric, chiral [Cu2(L)Br2]2+ 'wedge-shaped' tectons are found. The links between the dicopper tectons and the overall chirality and packing of the chains are dictated by the bromide ion content, not the counter anion. In contrast, the chloride complexes exhibit linked asymmetric [Cu2(L)Cl3]+ tectons with distinct N3CuCl2 and N4CuCl2 centres in the solid. The overall structures of the dicopper bromide and chloride units persist in solution irrespective of the halide. The redox chemistry of the various species is also described.     

Immobilisation of electroactive macrocyclic complexes within titania films

The 4-carboxyphenyl-appended macrocyclic ligand trans-6,13-dimethyl-6-((4-carboxybenzyl)amino)-1,4,8,11-tetraazacyclotetradecane-6-amine (HL10) has been synthesised and complexed with Co(III). The mononuclear complexes [Co(HL10)(CN)]2+ and [CoL10(OH)]+ have been prepared and the crystal structures of their perchlorate salts are presented, where the ligand is bound in a pentadentate mode in each case while the 4-carboxybenzyl-substituted pendent amine remains free from the metal. The cyano-bridged dinuclear complex [CoL10-mu-NC-Fe(CN)5]2- was also prepared and chemisorbed on titania-coated ITO conducting glass. The adsorbed complex is electrochemically active and cyclic voltammetry of the modified ITO working electrode in both water and MeCN solution was undertaken with simultaneous optical spectroscopy. This experiment demonstrates that reversible electrochemical oxidation of the Fe(II) centre is coupled with rapid changes in the optical absorbance of the film.