SOLID-PHASE SYNTHESIS OF 2''''—5'''' OLIGOADENYLATE——2''''—5''''A CORE

With phosphotriester approach, the 2'—5' linked oligonucleotide——2'—5'A core was synthesized by using cross-linked polyacrylmorpholide resin as the support and the mesitylene sulfonyl chloride and N-methylimidazole as the condensing agent. Synthesizing the 2'—5'A core with this method has not yet been described. The yields that each of the protected monomers was attached to the polymeric support were satisfactory, i.e., 100%, 60% and 91% respectively.For the synthesis, we improved the methods for preparing the polymeric support and a series of intermediates. For this reason, the yields of the products were markedly increased and the operations to separate the products from the by-products and reagents were simplified.     

新型吸附剂——球形碳化树脂的研究Ⅲ.

聚偏二氯乙烯球体经185℃预裂解后,进行960℃高温裂解,得到0.6—0.8mm粒径的球形碳化吸附树脂,碳收率为74％以上。碳化吸附树脂机械强度好,比表面为1,000M~2/g以上,对肌酸酐吸附率可达99％。     

固定化酶在生物医学上的应用(Ⅰ)——聚丙烯酰胺固定化尿酶的制备及性能

本文以交联聚丙烯酰胺对尿酶包埋进行了研究,制备出了球形固定化尿酶,其含酶量高(1份酶对1份聚合物),相对活性为50%左右,对尿素的分解活性:120m/ml(固定化尿酶,37℃,2小时),提高了稳定性,在4℃下,66天后活性降低8%,106天后活性降低22%,37℃下11天后活性降低18%,并且不泄漏酶。基于以上特点,该固定化尿酶为吸附型人工肾提供了一个较合适的活性材料。     

INVESTIGATION OF A NEW TYPE OF ADSORBENT——SPHERICAL CARBONIZED ADSORBENT Ⅲ*

Polyvinylidene chloride beads were first heated at 185℃and then pyrolyzed at 960℃undernitrogen atmosphere in a tube-racking furnace. The surface area of the spherical carbonized ad-sorbent exceeds 1,00 M~2/g and its adsorbing rate for creatinine is over 99%. The mechanical strengthof the spherical carbonized adsorbent, 0. 6--0. 8 mm in diameter, is quite good.     

新型吸附剂——球形碳化树脂的研究Ⅰ.

苯乙烯-二乙烯苯共聚物小球经浓硫酸处理后进行高温裂解,得到球形碳化树脂。测定球形碳化树脂的诸物理性质及其对肌酸酐、尿酸的吸附性能,并研究物理性质与吸附性能间的关系。裂解产品比表面可达800M~2/g以上,对肌酸酐和尿酸的吸附率可达98％以上。     

2′-5′连接寡聚核苷酸——2′-5′A核的固相合成

本文用磷酸三酯法,在交联聚丙烯酰吗福啉载体上,以1,3,5-三甲苯磺酰氯(MS)加N-甲基咪唑(N-Mein)为缩合剂,合成了2′-5′相连的寡聚腺苷酸——2′-5′A核。每个保护的单体接到载体上的收率是令人满意的,分别是100％,64％和89％。在合成过程中,我们对合成一系列中间体和制备载体的方法进行了改进,使产物收率大大提高,分离操作得以简化。