Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Microwave promoted methylation of plant polysaccharides

O-Methylation is of outstanding importance in structural polysaccharide chemistry. A novel method for the methylation of polysaccharides using microwave (MW) irradiation is described. Seed gum from Cyamopsis tetragonolobus (Guar) was fully methylated with dimethyl sulphate and sodium hydroxide using 100% microwave power for 4 min in 68% yield. The completely methylated seed gum thus obtained was hydrolyzed by 70% formic acid followed by 0.5N H₂SO₄ under full microwave power for 1.16 and 1.66 min, respectively. The partially methylated monosaccharides were separated and identified.     

Baseline studies of radon/thoron concentration levels in and around the Lambapur and Peddagattu areas in Nalgonda district, Andhra Pradesh, India

Studies conducted by Atomic Minerals Directorate of Exploration and Research (AMD) of Hyderabad, India had established the presence of higher concentrations of uranium in Lambapur and Peddagattu areas of Nalgonda district, AP, India and it was estimated that it could be a viable source for commercial extraction. The envisaged extraction process involves dispersion of radioactive particulate matter into atmosphere. Environmental radioactive studies in and around proposed mining areas at this point of time will be extremely useful for establishing base line data before a large scale uranium extraction process comes into existence. To this end, Solid State Nuclear Track Detectors were installed to evaluate indoor radon and thoron concentration levels in the dwellings of the area. The geometric means of radon and thoron concentration levels were found to be (7.1±0.2)×10¹ and (6.7±0.3)×10¹ Bq/m³, respectively. Simultaneously, natural background radiation measurements were also made and these levels are found to vary from 770 to 3995 μGy/y in the spatial distribution.     

Ring resonators with N × M couplers

Multiple-zero multiple-pole optical filter transfer functions may be implemented more efficiently in an integrated optics architecture if higher order N × M optical couplers are utilized. For example, a coherent ring resonator made from two 3×3 couplers offers some advantages over the three mirror Fabry-Perot etalon, which is its analog. To this end we develop the formalism for obtaining the transfer functions and scattering matrices of ring resonators made from two N × M couplers. We then present a methodology for analyzing serial and parallel systems of N × M optical coupler ring resonators.     

Surfactant tail length-dependent lipase activity profile in cationic water-in-oil microemulsions

The catalytic activity of Chromobacterium viscosum lipase (CV-lipase) was estimated across varying surfactant tail lengths (C-10-C-18) in water-in-oil (w/o) microemulsions of cationic surfactants containing four different hydroxyethyl-substituted head groups. An attempt to find a correlation, if any, between the activity of interfacially solubilized lipase and the varying surfactant tails was made for the first time in micellar enzymology. The second-order rate constant, k2, in lipase-catalyzed hydrolysis of p-nitrophenyl-n-hexanoate at pH 6.0 and 25 degrees C shows an improvement in enzyme activity (approximately 30-140%) across different head groups of amphiphiles with increasing tail lengths in varying solution compositions. Improvement of enzyme activity is prominent in ascending from C-10 to C-14/C-16, depending on the nature of polar head group. The hydrolytic activity of lipase in different surfactant (50 mM)/water/isooctane/n-hexanol with varying z= [alcohol]/[surfactant] (6.4 or 4.8) was amplified by 25-250% with increment in surfactant tail length in comparison with widely used cationic w/o microemulsions having solution compositions (z=16). As a notable outcome of this research, we found w/o microemulsions of 25 mM tetradecyltrimethylammonium bromide/water/isooctane/n-hexanol (z=8) producing the highest ever activity of lipase in any w/o microemulsions.     

Thermodynamic study of N-trifluoroacetyl-O-alkyl nipecotic acid ester enantiomers on diluted permethylated beta-cyclodextrin stationary phase

Thermodynamic studies were performed on 12 pairs of N-trifluoroacetyl-O-alkyl nipecotic acid ester enantiomers on diluted permethylated beta-cyclodextrin stationary phase (CP Chirasil-Dex CB). The influence of ester alkyl group structure on interaction with permethylated beta-cyclodextrin (Me-CD) and enantioselectivity was studied. The types of alkyl groups studied included n-alkyl (C1-C5) and groups containing branching at differing locations relative to the chiral center of the molecule. The results show that for a given molecular weight, the n-alkyl esters have stronger interactions with Me-CD than esters containing branched alkyl groups. However, although having weaker interactions with Me-CD, esters containing alpha-branched alkyl groups exhibit higher enantioselectivity than the corresponding n-alkyl or beta-branched isobutyl esters. From the retention data, thermodynamic parameters were estimated using the retention increment method and enthalpy-entropy compensation plots (ln R' versus deltaH) were constructed. The results suggest that ester enantiomers with branching at the alpha-carbon of the ester alkyl group have additional and/or different types of enantioselective interactions with Me-CD than the C1-C5 n-alkyl esters or beta-branched isobutyl ester. In order to obtain a qualitative sense of the interaction with Me-CD, structures of the diastereomeric complexes formed between Me-CD and some of the ester enantiomers were modeled using simulated annealing molecular dynamics.     

Amino Acid based cationic surfactants in aqueous solution: physicochemical study and application of supramolecular chirality in ketone reduction

The present study provides a molecular understanding of the origin of the chirality in aqueous micelles and its correlation with the proficiency of stereoselective ketone reduction. The effects of varied headgroup architecture on the surface-active properties as well as on other microstructural parameters were studied and correlated to the structural differences of these naturally occurring amino acid containing surfactants (1-4). Micropolarity sensed by pyrene showed that the micelles prepared using 1-4 are mostly hydrated; particularly large headgroup size surfactant produces more polar environment. A theoretical study was done to quantify the varied spatial dissymmetry for all four surfactants. Asymmetric reduction of prochiral ketones was carried out at the aqueous micellar interface of these chiral amphiphiles by exploiting the supramolecular chirality as evidenced from a circular dichroism study. The enantioselectivity of the reduction process is rationally improved through increase in spatial dissymmetry and steric constraint imposed at the micellar interface by the polar head of surfactants.     

Nickel nitrosyl complexes with the diphenylphosphinoethane ligand

Summary Four-coordinate nickel nitrosyl complexes of the general formula Ni(NO)X(Dppe) (Dppe=Ph₂PCH₂CH₂PPh₂) have been prepared byin situ formation of Ni(NO₂)X(Dppe), (X= Cl, Br, I or SCN) followed by reduction with triphenylphosphine, or carbon monoxide, and/or DMF. Oxygenation of the nitrosyl complexes gives the corresponding nitro products and as indicated by u.v.-vis spectroscopy involves formation of an intermediate. The oxygenation rate increases markedly in the presence of light or of a catalytic amount of benzoyl peroxide and a tentative explanation is offered for these observations. Ionic adducts are formed in reactions between the nitrosyl complexes and donor molecules.Paper presented in part at the XXth ICCC Conference.     

A highly diastereoselective synthesis of (E)-B-2-(1-cyclopropyl-1-alkenyl)-1,3,2-dioxaborinanes. Isolation and oxidation to alkyl cyclopropyl ketones

A convenient, novel synthesis of alkyl cyclopropyl ketones based on Z-1-bromo-1-alkenylboronate esters is developed. α-Bromo-(Z)-1-alkenylboronate esters readily available from literature procedures smoothly undergo a reaction with cyclopropylmagnesium bromide in tetrahydrofuran to provide the corresponding ‘ate’ complexes. These ‘ate’ complexes undergo intramolecular nucleophilic substitution reactions to provide the corresponding (E)-1-alkenylboronate esters containing cylcopropyl moiety for the first time in good isolated yields (68-82%). The carbon skeleton present in these intermediates is confirmed by oxidation with hydrogen peroxide and sodium acetate to afford the corresponding alkyl cyclopropyl ketones in good yields (72-85%).     

Diminished Respirative Growth and Enhanced Assimilative Sugar Uptake Result in Higher Specific Fermentation Rates by the MutantPichia stipitis FPL-061

A mutant strain ofPichia stipitis, FPL-061, was obtained by selecting for growth on L-xylose in the presence of respiratory inhibitors. The specific fermentation rate of FPL-061, was higher than that of the parent,Pichia stipitis CBS 6054, because of its lower cell yield and growth rate and higher specific substrate uptake rate. With a mixture of glucose and xylose, the mutant strain FPL-061 produced 29.4 g ethanol/L with a yield of 0.42 g ethanol/g sugar consumed. By comparison, CBS 6054 produced 25.7 g ethanol/L with a yield of 0.35 gJg. The fermentation was most efficient at an aeration rate of 9.2 mmoles O₂ L^-1 h^-1. At high aeration rates (22 mmoles O₂ L^-1 h^-1), the mutant cell yield was less than that of the parent. At low aeration rates, (1.1 to 2.5 O₂ L^-1 h^-1), cell yields were similar, the ethanol formation rates were low, and xylitol accumulation was observed in both the strains. Both strains respired the ethanol once sugar was exhausted. We infer from the results that the mutant, P.stipitis FPL-061, diverts a larger fraction of its metabolic energy from cell growth into ethanol production.