Ethanol production in immobilized-cell bioreactors from mixed sugar syrups and enzymatic hydrolysates of steam-exploded biomass

We investigated ethanol production from mixed sugar syrups. Hydrolysates were prepared from enzymatic saccharification of steam-pretreated aspen chips. Syrups containing 45 g/L of glucose and 12 g/L of xylose were detoxified through two ion-exchange resins and then fermented with Pichia stipitis and Saccharomyces cerevisiae immobilized in Ca-alginate gel beads. Combinations of different gel fractions in the fermentation volume, amount of yeast cells, and ratios of P. stipitis vs S. cerevisiae within each bead were compared. In the best conditions, by using a total beads volume corresponding to 25% of the working volume, we obtained a yield of 0.39 g_ethanol/g_{initial sugars}. This amount of gel entrapped an initial cell concentration of 6×10¹²cells/L with ratio of S. cerevisiae/P. stipitis of 0.25 g/g. Modified stirredtank reactors were obtained either by adding marbles or by inserting a perforated metal cylinder, which reduced considerably the rupture of beads while visibly improving oxygenation of the medium.     

Effect of agitation and aeration on production of hexokinase by Saccharomyces cerevisiae

A batch culture of Saccharomyces cerevisiae for the production of hexokinase was carried out in a 5-L fermentor containing 3 L of culture medium, which was in oculated with cell suspension (about 0.7 g/L), and left ferm entingat 35°C and pH 4.0. The aeration and agitation were adjusted to attain k _La values of 15, 60, 135, and 230 h⁻¹. The highest hexokinase productivity (754.6 U/[L h]) and substrate-cell conversion yield (0.21 g/g) occurred for a k _La of 60 h⁻¹. Moreover, the formation of hexokinase and cell growth are coupled events, which is in accordance with the constitutive character of this enzyme. Hexokinase formation for k _La>60 h⁻¹ was not enhanced probably owing to saturation of the respiratory pathway by oxygen.     

Improved Bioethanol Production Using Fusants of Saccharomyces cerevisiae and Xylose-Fermenting Yeasts

The present research deals with the development of a hybrid yeast strain with the aim of converting pentose and hexose sugar components of lignocellulosic substrate to bioethanol by fermentation. Different fusant strains were obtained by fusing protoplasts of Saccharomyces cerevisiae and xylose-fermenting yeasts such as Pachysolen tannophilus, Candida shehatae and Pichia stipitis. The fusants were sorted by fluorescent-activated cell sorter and further confirmed by molecular characterization. The fusants were evaluated by fermentation of glucose?Cxylose mixture and the highest ethanol producing fusant was used for further study to ferment hydrolysates produced by acid pretreatment and enzymatic hydrolysis of cotton gin waste. Among the various fusant and parental strains used under present study, RPR39 was found to be stable and most efficient strain giving maximum ethanol concentration (76.8?±?0.31?g L^?1), ethanol productivity (1.06?g L^?1 h^?1) and ethanol yield (0.458?g g^?1) by fermentation of glucose?Cxylose mixture under test conditions. The fusant has also shown encouraging result in fermenting hydrolysates of cotton gin waste with ethanol concentration of 7.08?±?0.142?g L^?1, ethanol yield of 0.44?g g^?1, productivity of 0.45?g L^?1?h^?1 and biomass yield of 0.40?g g^?1.     

Characterization and complementation of a Pichia stipitis mutant unable to grow on d-xylose or l-arabinose

Pichia stipitis CBS 6054 will grow on d-xylose, d-arabinose, and l-arabinose. d-Xylose and l-arabinose are abundant in seed hulls of maize, and their utilization is important in processing grain residues. To elucidate the degradation pathway for l-arabinose, we obtained a mutant, FPL-MY30, that was unable to grow on d-xylose and l-arabinose but that could grow on d-arabinitol. Activity assays of oxidoreductase and pentulokinase enzymes involved in d-xylose, d-arabinose, and l-arabinose pathways indicated that FPL-MY30 is deficient in d-xylitol dehydrogenase (D-XDH), d- and l-arabinitol dehydrogenases, and d-ribitol dehydrogenase. Transforming FPL-MY30 with a gene for xylitol dehydrogenase (PsXYL2), which was cloned from CBS 6054 (Gen Bank AF127801), restored the D-XDH activity and the capacity for FPL-MY30 to grow on l-arabinose. This suggested that FPL-MY30 is critically deficient in XYL2 and that the d-xylose and l-arabinose metabolic pathways have xylitolas a common intermediate. The capacity for FPL-MY30 to grow on d-arabinitol could proceed through d-ribulose.     

Ethanol Production from Sugarcane Bagasse Hydrolysate Using Pichia stipitis

The objective of this study was to evaluate the ethanol production from the sugars contained in the sugarcane bagasse hemicellulosic hydrolysate with the yeast Pichia stipitis DSM 3651. The fermentations were carried out in 250-mL Erlenmeyers with 100 mL of medium incubated at 200 rpm and 30 °C for 120 h. The medium was composed by raw (non-detoxified) hydrolysate or by hydrolysates detoxified by pH alteration followed by active charcoal adsorption or by adsorption into ion-exchange resins, all of them supplemented with yeast extract (3 g/L), malt extract (3 g/L), and peptone (5 g/L). The initial concentration of cells was 3 g/L. According to the results, the detoxification procedures removed inhibitory compounds from the hemicellulosic hydrolysate and, thus, improved the bioconversion of the sugars into ethanol. The fermentation using the non-detoxified hydrolysate led to 4.9 g/L ethanol in 120 h, with a yield of 0.20 g/g and a productivity of 0.04 g L^?1 h^?1. The detoxification by pH alteration and active charcoal adsorption led to 6.1 g/L ethanol in 48 h, with a yield of 0.30 g/g and a productivity of 0.13 g L^?1 h^?1. The detoxification by adsorption into ion-exchange resins, in turn, provided 7.5 g/L ethanol in 48 h, with a yield of 0.30 g/g and a productivity of 0.16 g L^?1 h^?1.     

The Influence of Initial Xylose Concentration, Agitation, and Aeration on Ethanol Production by Pichia stipitis from Rice Straw Hemicellulosic Hydrolysate

Rice straw hemicellulosic hydrolysate was used as fermentation medium for ethanol production by Pichia stipitis NRRL Y-7124. Shaking bath experiments were initially performed aiming to establish the best initial xylose concentration to be used in this bioconversion process. In the sequence, assays were carried out under different agitation (100 to 200 rpm) and aeration (V _flask/V _medium ratio varying from 2.5 to 5.0) conditions, and the influence of these variables on the fermentative parameters values (ethanol yield factor, Y _P/S; cell yield factor, Y _X/S; and ethanol volumetric productivity, Q _P) was investigated through a 2² full-factorial design. Initial xylose concentration of about 50 g/l was the most suitable for the development of this process, since the yeast was able to convert substrate in product with high efficiency. The factorial design assays showed a strong influence of both process variables in all the evaluated responses. The agitation and aeration increase caused a deviation in the yeast metabolism from ethanol to biomass production. The best results (Y _P/S?= 0.37 g/g and Q _P?=?0.39 g/l.h) were found when the lowest aeration (2.5 V _flask/V _medium ratio) and highest agitation (200 rpm) levels were employed. Under this condition, a process efficiency of 72.5% was achieved. These results demonstrated that the establishment of adequate conditions of aeration is of great relevance to improve the ethanol production from xylose by Pichia stipitis, using rice straw hemicellulosic hydrolysate as fermentation medium.     

Evaluation of Cashew Apple Juice for the Production of Fuel Ethanol

A commercial strain of Saccharomyces cerevisiae was used for the production of ethanol by fermentation of cashew apple juice. Growth kinetics and ethanol productivity were calculated for batch fermentation with different initial sugar (glucose + fructose) concentrations. Maximal ethanol, cell, and glycerol concentrations were obtained when 103.1 g L⁻¹ of initial sugar concentration was used. Cell yield (Y _X/S) was calculated as 0.24 (g microorganism)/(g glucose + fructose) using cashew apple juice medium with 41.3 g L⁻¹ of initial sugar concentration. Glucose was exhausted first, followed by fructose. Furthermore, the initial concentration of sugars did not influence ethanol selectivity. These results indicate that cashew apple juice is a suitable substrate for yeast growth and ethanol production.     

Continuous cultivation of dilute-acid hydrolysates to ethanol by immobilized Saccharomyces cerevisiae

The continuous cultivation of immobilized Saccharomyces cerevisiae CBS 8066 on dilute-acid hydrolysates of forest residuals was investigated. The yeast cells were immobilized in 2–4% Ca-alginate beads. The 2% beads were not stable. However, the 3 and 4% beads were stable for at least 3 wk when an extra resource of calcium ions was available in the medium. The continuous cultivation of a dilute-acid hydrolysate by the immobilized cells at dilution rates of 0.3, 0.5, and 0.6 h⁻¹ resulted in 86, 83, and 79% sugar consumption, respectively, and an ethanol yield between 0.45 and 0.48 g/g. The hydrolysate was fermentable at a dilution rate of 0.1 h⁻¹ in a free-cell system but washed out at a dilution rate of 0.2 h⁻¹. The continuous cultivation of a more inhibiting hydrolysate was not successful by either free- or immobilized-cell systems even at a low dilution rate of 0.07 h⁻¹. However, when the hydrolysate was overlimed, it was fermentable by the immobilized cells at a dilution rate of 0.2 h⁻¹.     

Succinic Acid Production from Cheese Whey using Actinobacillus succinogenes 130 Z

Actinobacillus succinogenes 130 Z was used to produce succinic acid from cheese whey in this study. At the presence of external CO₂ supply, the effects of initial cheese whey concentration, pH, and inoculum size on the succinic acid production were studied. The by-product formation during the fermentation process was also analyzed. The highest succinic acid yield of 0.57 was obtained at initial cheese whey concentration of 50 g/L, while the highest succinic acid productivity of 0.58 g h⁻¹ L⁻¹ was obtained at initial cheese whey concentration of 100 g/L. Increase in pH and inoculum size caused higher succinic acid yield and productivity. At the preferred fermentation condition of pH 6.8, inoculum size of 5% and initial cheese whey concentration of 50 g/L, succinic acid yield of 0.57, and productivity of 0.44 g h⁻¹ L⁻¹ were obtained. Acetic acid and formic acid were the main by-products throughout the fermentation run of 48 h. It is feasible to produce succinic acid using lactose from cheese whey as carbon resource by A. succinogenes 130 Z.     

Yeast Biomass Production in Brewery’s Spent Grains Hemicellulosic Hydrolyzate

Yeast single-cell protein and yeast extract, in particular, are two products which have many feed, food, pharmaceutical, and biotechnological applications. However, many of these applications are limited by their market price. Specifically, the yeast extract requirements for culture media are one of the major technical hurdles to be overcome for the development of low-cost fermentation routes for several top value chemicals in a biorefinery framework. A potential biotechnical solution is the production of yeast biomass from the hemicellulosic fraction stream. The growth of three pentose-assimilating yeast cell factories, Debaryomyces hansenii, Kluyveromyces marxianus, and Pichia stipitis was compared using non-detoxified brewery’s spent grains hemicellulosic hydrolyzate supplemented with mineral nutrients. The yeasts exhibited different specific growth rates, biomass productivities, and yields being D. hansenii as the yeast species that presented the best performance, assimilating all sugars and noteworthy consuming most of the hydrolyzate inhibitors. Under optimized conditions, D. hansenii displayed a maximum specific growth rate, biomass yield, and productivity of 0.34 h⁻¹, 0.61 g g⁻¹, and 0.56 g l⁻¹ h⁻¹, respectively. The nutritional profile of D. hansenii was thoroughly evaluated, and it compares favorably to others reported in literature. It contains considerable amounts of some essential amino acids and a high ratio of unsaturated over saturated fatty acids.     

<Emphasis Type="Italic">Rhizopus stolonifer</Emphasis> LAU 07: a novel source of fructosyltransferase

Increasing awareness of the importance of fructooligosaccharides (FOS) as ingredients of functional foods has led to intensive search of new sources of fructosyltransferases (FTase), enzymes responsible for the conversion of sucrose to fructooligosaccharides. A local strain of Rhizopus stolonifer isolated from spoilt orange fruit with high fructosyltransferase activity (U _t) of 12.31–45.70 U mL⁻¹ during a fermentation period of 24–120 h is herein reported. It showed low hydrolytic activity (U _h) in the range of 0.86–1.78 U mL⁻¹ during the same period. FOS yield of 34 % (1-kestose, GF₂, nystose, GF₃) was produced by FTase obtained from a 72 h-old culture using 60 g of sucrose per 100 mL of the substrate. When the isolate was grown in a defined submerged medium, its pH dropped sharply from the intial value of 5.5 to 1.0 within 24 h, and this value was maintained throughout the fermentation. The biomass content ranged from 8.8 g L⁻¹ at 24 h of fermentation to reach the maximum of 10 g L⁻¹ at 72 h. It was reduced to 5.6 g L⁻¹ at the end of 120 h of fermentation. This report represents the first reference to a strain of Rhizopus as a source of FTase for the production of FOS. The high U _t/U _h ratio shown by this isolate indicates that it may be a good strain for the industrial and commercial production of FOS. However, there is a need of further optimization of the bioprocess to increase the conversion efficiency of sucrose to FOS by the enzyme.     

Scale-up of microbubble dispersion generator for aerobic fermentation

A laboratory-scale microbubble dispersion (MBD) generator was shown to improve oxygen transfer to aerobic microorganisms when coupled to the conventional air-sparger. However, the process was not demonstrated on a large scale to prove its practical application. We investigated the scale-up of a spinning-disk MBD generator for the aerobic fermentation of Saccharomyces cerevisiae (baker’s yeast). A 1-L spinning-disk MBD generator was used to supply air for 1- and 50-L working volume fermentation of baker’s yeast. For the two levels investigated, the MBD generator maintained an adequate supply of surfactant-stabilized air microbubbles to the microorganisms at a relatively low agitation rate (150 rpm). There was a significant improvement in oxygen transfer to the microorganism relative to the conventional sparger. The volumetric mass transfer coefficient, k _L a, for the MBD system at 150 rpm was 765 h⁻¹ compared to 937 h⁻¹ for the conventional sparger at 500 rpm. It is plausible to surmise that fermentation using larger working volumes may further improve the k _L a values and the dissolved oxygen (DO) levels because of longer hold-up times and, consequently, improve cell growth. There was no statistically significant difference between the cell mass yield on substrate (0.43 g/g) under the MBD regime at an agitation rate of 150 rpm and that achieved for the conventional air-sparged system (0.53 g/g) at an agitation rate of 500 rpm. The total power consumption per unit volume of broth in the 50-L conventional air-sparged system was threefold that for the MBD unit for a similar product yield. Practical application of the MBD technology can be expected to reduce power consumption and therefore operating costs for aerobic fermentation.     

Continuous ethanol production from nonsterilized carob pod extract by immobilizedSaccharomyces cerevisiae on mineral kissiris using a two-reactor system

The continuous production of ethanol from nonsterilized carob pod extract by immobilizedSaccharomyces cerevisiae on mineral kissiris using one- and two-reactor systems has been investigated. A maximum ethanol productivity of 9.6 g/L/h was obtained at an initial sugar concentration of 200 g/L and D = 0.4 h^-1 with 68% of theoretical yield and 34% of sugar utilization using the one-reactor system. AtS ₀ = 200 g/L, D = 0.05 h^-1, 83% of theoretical yield, and 64% of sugar utilization, an ethanol productivity of 2.6 g/L/h was achieved. In the tworeactor system, a maximum ethanol productivity of 11.4 g/L/h was obtained at S₀ = 200 g/L and D = 0.4 h^-1 with 68.5% of theoretical yield and 41.5% of sugar utilization. The two-reactor system was operated at a constant dilution rate of 0.3 h^-1 for 60 d without loss of the original immobilized yeast activity. In this case, the average ethanol productivity, ethanol yield (% of theoretical), and sugar utilization were 10.7 g/L/h, 71.5%, and 48%, respectively.     

Effect of Agitation Rate on Ethanol Production from Sugar Maple Hemicellulosic Hydrolysate by Pichia stipitis

Concentrated dilute acid hydrolysate was obtained from hot water extracts of Acer saccharum (sugar maple) and was fermented to ethanol by Pichia stipitis in a 1.3-L-benchtop bioreactor. The conditions under which the highest ethanol yield was achieved were when the air flow rate was set to 100?cm³ and the agitation rate was set to 150?rpm resulting in an overall mass transfer coefficient (K _L a) of 0.108?min^?1. A maximum ethanol concentration of 29.7?g/L was achieved after 120?h of fermentation; however, after 90?h of fermentation, the ethanol concentration was only slightly lower at 29.1?g/L with a yield of 0.39?g ethanol per gram of sugar consumed. Using the same air flow rate and adjusting the agitation rate resulted in lower ethanol yields of 0.25?g/g at 50?rpm and 0.30?g/g at 300?rpm. The time it takes to reach the maximum ethanol concentration was also affected by the agitation rate. The ethanol concentration continued to increase even after 130?h of fermentation when the agitation rate was set at 50?rpm, whereas the maximum ethanol concentration was reached after only 68.5?h at 300?rpm.     

Continuous xylose fermentation byCandida shehatae in a two-stage reactor

Recent work has identified ethanol toxicity as a major factor preventing continuous production of ethanol at the concentrations obtainable in batch culture. In this paper we investigate the use of a continuous two-stage bioreactor design to circumvent toxic effects of ethanol. Biomass is produced via continuous culture in the first stage reactor in which ethanol concentrations are either absent or maintained at low levels. The freshly grown cells are fed into the second bioreactor in which high ethanol concentrations are produced. The steady influx of fresh cells and continuous removal of spent cells helps minimize the loss of fermentative activity that results from anaerobiosis and exposure to high ethanol concentrations. A final ethanol concentration of 37 g L⁻¹ and overall yield of .32 g g⁻¹ were obtained with the two-stage reactor as compared to corresponding values of 38 g L⁻¹ and .32 g g⁻¹ obtained in batch. The volumetric rate in the two-state process was .96 g L⁻¹ as compared to .46 g L⁻¹ h⁻¹ in batch. Maintained in cooperation with the University of Wisconsin-Madison. The use of trade, firm, or corporation names in this publication is for the information and convenience of the reader. Such use does not constitute an official endorsement or approval by the US Department of Agriculture of any product or service to the exclusion of others which may be suitable.     

Spiral tubular bioreactors for hydrogen production by photosynthetic microorganisms

Spiral tubular bioreactors were constructed out of transparent PVC tubing for H2 production applications. Both a cyanobacterialAnabaena variabilis mutant that lacks uptake hydrogenase activity and the photosynthetic bacteriumRhodobacter sp. CBS were tested in the bioreactors. Continuous H₂ photoproduction at an average rate of 19 mL min^-2.h^-1 was observed using theA. variabilis mutant under an air atmosphere (without argon sparging or application of a partial vacuum). The cyanobacterial photobioreactor was run continuously for over one month with an average efficiency of light energy conversion to H₂ of 1.4%. Another H₂-producing approach employed a unique type of activity found in a strain of photosynthetic bacteria that shifts CO (and H₂O) into H₂ (and CO₂) in darkness. Continuous dark H₂ production byRhodobacter sp. CBS from CO (in anticipation of using synthesis gas as the future substrate) at rates up to 140 mL . g cdw^-1 . h^-1 was observed in a bubble-train bioreactor for more than 10 d.

     

Xylose reductase activity of Candida guilliermondii during xylitol production by fed-batch fermentation

Xylose reductase activity of Candida guilliermondii FTI 20037 was evaluated during xylitol production by fed-batch fermentation of sugarcane bagasse hydrolysate. A 2^4-1 fractional factorial design was used to select process variables. The xylose concentrations in the feeding solution (S _F ) and in the fermentor (S ₀), the pH, and the aeration rate were selected for optimization of this process, which will be undertaken in the near future. The best experimental result was achieved at S _F =45 g/L, S ₀=40 g/L, pH controlled at 6.0, and aeration rate of 1.2 vvm. Under these conditions, the xylose reductase activity was 0.81 U/mg of protein and xylitol production was 26.3 g/L, corresponding to a volumetric productivity of 0.55 g/(L·h) and a xylose xylitol yield factor of 0.68 g/g.     

The effect of initial cell concentration on xylose fermentation by Pichia stipitis

Xylose was fermented using Pichia stipitis CBS 6054 at different initial cell concentrations. A high initial cell concentration increased the rate of xylose utilization, ethanol formation, and the ethanol yield. The highest ethanol concentration of 41.0 g/L and a yield of 0.38 g/g was obtained using an initial cell concentration of 6.5 g/L. Even though more xylitol was produced when the initial cell concentrations were high, cell density had no effect on the final ethanol yield. A two-parameter mathematical model was used to predict the cell population dynamics at the different initial cell concentrations. The model parameters, a and b correlate with the initial cell concentrations used with an R(2) of 0.99.     

An Improved Process of Ethanol Production from Hemicellulose: Bioconversion of Undetoxified Hemicellulosic Hydrolyzate from Steam-Exploded Corn Stover with a Domesticated Pichia stipitis

Bioconversion of undetoxified hemicellulosic hydrolyzate from steam-exploded corn stover was investigated with a domesticated Pichia stipitis CBS 5776. The countercurrent washing was applied to recover sugars from the steam-exploded corn stover, which could enrich sugars in washing liquor and give an efficient saving of water. Acid concentration, reaction temperature, and time were optimized for the acid post-hydrolysis of oligosaccharides in steam-exploded prehydrolyzate by a central composite design and response surface methodology. The domestication of P. stipitis to the hydrolyzate resulted in improving sugar consumption and ethanol yield by gradually increasing the ratio of hydrolyzate in the medium. Recycling utilization of the domesticated yeast demonstrated that the yeast kept a stable ability of fermenting both hexose and pentose in the undetoxified hydrolyzate. The sugar consumption and ethanol yield were over 90 and 80?%, respectively.     

Kinetic and Stoichiometric Parameters in the Production of Carotenoids by <Emphasis Type="Italic">Sporidiobolus salmonicolor</Emphasis> (CBS 2636) in Synthetic and Agroindustrial Media

With the objective of determining the kinetic behavior (growth, substrate, pH, and carotenoid production) and obtain the stoichiometric parameters of the fermentative process by Sporidiobolus salmonicolor in synthetic and agroindustrial media, fermentations were carried out in shaken flasks at 25°C, 180 rpm, and initial pH of 4.0 for 120 h in the dark, sampling every 6 h. The maximum concentrations of total carotenoids in synthetic (913 μg/L) and agroindustrial (502 μg/L) media were attained approximately 100 h after the start of the fermentative process. Carotenoid bioproduction is associated with cell growth and the ratio between carotenoid production and cell growth (Y _P/X) is 176 and 163 μg/g in the synthetic and agroindustrial media, respectively. The pH of the agroindustrial fermentation medium varied from 4.2 to 8.5 during the fermentation. The specific growth rate (μ _X) for S. salmonicolor in synthetic and agroindustrial media was 0.07 and 0.04 h⁻¹, respectively. The synthetic medium allowed for greater productivity, obtaining maximum cell productivity (P _x) of 0.08 g L⁻¹ h⁻¹ and maximum total carotenoid productivity (P _car) of 14.2 μg L⁻¹ h⁻¹. Knowledge of the kinetics of a fermentative process is of extreme importance when transposing a laboratory experiment to an industrial scale, as well as making a quantitative comparison between different culture conditions.