Determination of heavy metal concentrations in plants exposed to different degrees of pollution using ICP-AES

Plant samples (Plantago lanceolata - narrow leaf plantain and Cichorium endiviae - endive) were collected in the surroundings of heavy metal emission sources and in other less contaminated areas. After digestion in a closed microwave system using HNO(3), the concentrations of Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, and Zn were determined using ICP-AES. Detection limits for all the elements of interest are given. Differences in heavy metal uptake rate between both plant species were observed. The uptake is more intensive for endive than for narrow leaf plantain. High concentrations of some heavy metals were determined in the unwashed plant samples as a result of exposure to aerosols. Tukey's statistical test was used to confirm the discrepancy of Cr concentration in plant samples from various areas. Washing the leaves with water was found to remove a large amount of water-soluble aerosols.     

Insight into the extractability of metals from soils using an implementation of the linear adsorption isotherm model

This paper deals with an often overlooked artifact in sequential and single extraction of metals from soils, viz. the volume to mass (V/m) ratio as a potential source for inadequate extraction yields. We offer a theoretical framework to get a grip on this intricate parameter and came up with a model based on a linear adsorption isotherm to derive the correct maximal metal extractability for a certain extractant. We verified the model experimentally using 0.1 mol l⁻¹ nitric acid for extraction of seven metals (Cr, Co, Cu, Cd, Pb, Ni and Zn) from an urban soil sample, and concluded that commonly used V/m ratios in the range of 10-40 ml g⁻¹ may give as much as 50% too low extraction yields. Thus, a strong caveat is in place as to be very critical what V/m ratios to use and preferably apply the model derived to obtain the correct maximal extractability using a variable V/m ratio method.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.

     

Applications of liquid crystals in biosensing and organic light-emitting devices: future aspects

ABSTRACT

This article summarises recent advances made in our laboratory towards the development of new technological applications, such as biosensors and organic light-emitting diodes (OLEDs) based on liquid crystals (LCs) other than LC displays. The study of biomolecular interaction using LC material relies on the specific interaction between the LC and the biomolecule of interest at interfaces that permit the biomolecular events to be amplified into easily measured signals for various sensing applications. In the first part, we emphases recent studies in the design and modulation of LC-based interfaces based on robust colloidal LC gels for biological amplification, qualitative and quantitative understanding of important biomolecular interactions at LC–aqueous interfaces for diagnostic and laboratory applications and design of LC droplets that hold promise to act as a marker for cells and cell-based interactions. In the second part, we described design of organic materials for application in OLEDs on various discotic monomers, dimers and oligomers. These molecules have the ability to transport charges, holes and electrons. In addition, because of the high conductivity and π–π stacking, they are considered as the advanced materials for practical applications. The technological advances in our laboratory using discotic LCs will be briefly presented in this article.     

Simultaneous quantification of curcuminoids and xanthorrhizol in Curcuma xanthorrhiza by high-performance liquid chromatography

A new method for simultaneous quantification of curcuminoids and xanthorrhizol (XNT) in Curcuma xanthorrhiza was developed and validated using high-performance liquid chromatography with diode-array UV–Vis detector. The chromatographic separation was achieved on a Phenomenex C18 at room temperature with the mobile-phase acetonitrile ?0.001% formic acid in gradient elution system and delivered at a flow rate of 1?mL/min. Detection wavelength 425?nm was used for curcuminoids and 224?nm for XNT. System suitability, linearity, precision, accuracy, limit of detection, limit of quantitation, and stability were evaluated and were found in good agreement with Association of Official Analytical Chemists guidelines for single-laboratory validation. The proposed method was found to be precise, accurate, and reliable and also could be applied for the simultaneous quantitative analysis of curcuminoids and XNT in C. xanthorriza raw material and its herbal medicinal product.     

Effective electrodeposition of Co-Ni-Cu alloys nanoparticles in the presence of alkyl polyglucoside surfactant

The effect of alkyl polyglucoside (APG) surfactant on the electrodeposition Co-Ni-Cu alloys nanoparticles has been investigated. In a typical electrodeposition experiment, it was found that as prepared Co-Ni-Cu alloys nanoparticles characteristics, such as size homogeneity, density, dispersion on the electrode substrate and the chemicals composition, depended strongly on the concentration of APG used in the reaction as well as the applied deposition potential. For the case of chemicals composition, low APG concentration (below CMC) was found to be effective for the preparation of excellent composition of the nanoalloys. Meanwhile, for the case of size homogeneity, density, and dispersion on the surface, high APG concentration (above CMC) and high deposition potential were preferred. It was also found that, at concentration above the CMC, the APG surfactant showed a metals ions deposition inhibition characteristic that caused increasing in the electrodeposition overpotential of the entire metals ions, namely cobalt, nickel and copper. As the result the copper was found to place a high percentage in the nanoalloys deposits. Owing to its simple procedure in controlling the composition and the nanoalloys growth characteristic, present approach should find a potential application in preparing Co-Ni-Cu magnetic nanoparticles for used in currently existing applications.     

A new high order compact off-step discretization for the system of 3D quasi-linear elliptic partial differential equations

We present a new fourth order compact finite difference scheme based on off-step discretization for the solution of the system of 3D quasi-linear elliptic partial differential equations subject to appropriate Dirichlet boundary conditions. We also develop new fourth order methods to obtain the numerical solution of first order normal derivatives of the solution. In all the cases, we use only 19-grid points of a single computational cell to compute the problem. The proposed methods are directly applicable to singular problems and the problems in polar coordinates, without any modification required unlike the previously developed high order schemes of [14] and [30]. We discuss the convergence analysis of the proposed method in details. Many physical problems are solved and comparative results are given to illustrate the usefulness of the proposed methods.     

Scholl reaction of hexaphenylbenzenes with hexakis-alkoxy substituents

The hexakis-alkoxy substituted hexa-peri-hexabenzocoronene (HBC) discotic core is desirable aiming at strong π–π interactions in columns, electronic tuning of the core and better processability. The feasibility of synthesising a new hexakis-alkoxy substituted HBC core is investigated and described in this report. Experimentally, it has been found that when two alkoxy substituents in a peripheral aromatic ring are placed meta to each other, the Scholl reaction results in fully cyclised HBC product. Surprisingly, when the alkoxy groups are ortho to each other, cyclodehydrogenation results in the formation of a partially fused product. This partially-fused ring formation happens under varying reaction conditions and irrespective of the differing alkyl chain lengths. Most plausibly, the considerable strain in the fully fused molecule from 1,2 isomer is the reason to cease the reaction at the partially fused stage. Further quantum-mechanical calculations at the B3LYP/6-31G(d) level of theory also support the hypothesis. The incorporation of two electron donating groups has also reduced the band gap compared to its mono alkoxy analogue. Reduced band gap values are promising feature of these molecules for finding future applications of discotic liquid crystals in organic electronics.     

Photonic true-time delay unit for broadband adaptive nulling in antenna arrays

An Opto-VLSI-based (VLSI: very-large-scale-integration) tunable true-time delay (TTD) generation unit used for adaptive null steering in phased array antennas is presented. The system is based on continuous tunable optical TTD technique. Arbitrary multiple true-time delays to generate multiple broadband nulls can simultaneously be synthesised for each antenna element. The proposed structured are characterised both theoretically and experimentally. Experimental results demonstrating the principle of the true-time delay for null generations are presented. The maximum time delay measured for a wavelength tuning from 1530 to 1560 nm is 9.5 ns.