Truncated Newton method for sparse unconstrained optimization using automatic differentiation

When solving large complex optimization problems, the user is faced with three major problems. These are (i) the cost in human time in obtaining accurate expressions for the derivatives involved; (ii) the need to store second derivative information; and (iii), of lessening importance, the time taken to solve the problem on the computer. For many problems, a significant part of the latter can be attributed to solving Newton-like equations. In the algorithm described, the equations are solved using a conjugate direction method that only needs the Hessian at the current point when it is multiplied by a trial vector. In this paper, we present a method that finds this product using automatic differentiation while only requiring vector storage. The method takes advantage of any sparsity in the Hessian matrix and computes exact derivatives. It avoids the complexity of symbolic differentiation, the inaccuracy of numerical differentiation, the labor of finding analytic derivatives, and the need for matrix store. When far from a minimum, an accurate solution to the Newton equations is not justified, so an approximate solution is obtained by using a version of Dembo and Steihaug's truncated Newton algorithm (Ref. 1).This paper was presented at the SIAM National Meeting, Boston, Massachusetts, 1986.     

正交各向异性矩形板受迫振动的三维分析

从正交各向异性三维弹性动力学的控制方程出发，在求得四边简支矩形板自由振动频率和位移振型的基础上，构造了受迫振动的位移函数；利用自由振动位移振型的正交性，将控制方程的空间变量和时间变量分离，得到了广义质量、广义力和频率表示的关于时间的2阶常微分方程，从而得到了正交各向异性弹性矩形板在受迫振动下的位移场和应力场．给出了本文方法与薄板理论的算例．     

On practical metrology and chemical analysis: etalons and traceability systems

 National measurement systems are infrastructures to ensure, for each nation, a consistent and internationally recognised basis for measurement. Such complex systems have historical, technical, legal, organisational and institutional aspects to connect scientific metrology with practical measurements. Underlying any valid measurement is a chain of comparisons linking the measurement to an accepted standard. The ways the links are forged and the etalons (measurement standards) to which they connect are defining characteristics of all measurement systems. This is often referred to as traceability which aims at basing measurements in common measurement units – a key issue for the integration of quantitative chemical analysis with the evolving physical and engineering measurement systems. Adequate traceability and metrological control make possible new technical capabilities and new levels of quality assurance and confidence by users in the accuracy and integrity of quantitative analytical results. Traceability for chemical measurements is difficult to achieve and harder to demonstrate. The supply of appropriate etalons is critical to the development of metrology systems for chemical analysis. An approach is suggested that involves the development of networks of specialised reference laboratories able to make matrix-independent reference measurements on submitted samples, which may then be used as reference materials by an originating laboratory using its practical measurement procedures. Received: 31 July 1995 Accepted: 19 August 1995     

正电子产生靶上初级电子束半径的最小化研究

为获得尽可能高的正电子(e⁺)产额,严格控制初级电子(e^－)束在e⁺产生靶上的束半径是至关重要的.首先分析了使e^－束半径增大的各因素和对这些因素的制约;然后以北京正负电子对撞机(BEPC)的正电子源为例,给出了束半径的实测值和计算值的比较,以具体说明这些因素的影响;最后讨论了北京正负电子对撞机二期工程(BEPC-Ⅱ)的相应优化设计研究,提出了获得靶上最小束半径的若干途径.     

The Post-Hopf-Bifurcation Response of a Loosely Supported Cylinder in an Array Subjected to Cross-Flow. Part II: Theoretical Model and Comparison with Experiments

A nonlinear quasi-steady model for the analysis of the dynamics of a loosely supported cylinder, which takes into account position-dependent nonlinear fluid forces as well as nonuniform flow, is formulated. The model includes an approximation for the equivalent viscous damping associated with energy dissipation on impact at the support. The nonlinear model shows reasonably good agreement with experiments, in predicting the observed bifurcations in the cylinder response. Comparison criteria include the standard orbital plots, time traces and response spectra. A borderline chaotic response is found to be predominant over the test velocity range. In this chaotic regime, the theoretical results were verified via attractor fractal-dimension calculations and saddle orbit distributions; theoretical values of these invariant measures compare reasonably well with their experimental counterparts. Two mechanisms leading to chaos have been identified for this system. The first is a switching mechanism , at the onset of impacting. The second, and more prevalent, is the type I intermittency route to chaos.     

Identification by high-performance liquid chromatography of tyrosine ammonia-lyase activity in purified fractions of Phaseolus vulgaris phenylalanine ammonia-lyase.

Activities of phenylalanine ammonia-lyase (PAL) and tyrosine ammonia-lyase (TAL) were assessed at each stage of a three-step purification of PAL. Assays were performed by high-performance liquid chromatographic (HPLC) separation and ultraviolet detection of reaction products. Use of HPLC permitted assay of low activities of PAL and TAL for periods up to approximately four and two days, respectively. HPLC also facilitated the accurate quantitation of the product of the TAL reaction, trans-p-coumaric acid, which was observed to isomerize readily under experimental conditions. PAL and TAL were associated throughout the purification procedure, with TAL activity at 0.6-1.3% of PAL activity. It was concluded that, contrary to previous reports, TAL and PAL activities are mediated by the same enzyme, or else by chromatographically very similar enzymes.     

关于阶乘的Erds-Stewart猜想

摘要:设n是正整数;P_0=1,P_i(i=1,2,…)是第i个素数.本文证明了:方程 n!+1=P_k~aP_(k+1)~b,P_(k-1)0,b>0,仅有解(n,P_k,P_(k+1),a,b)=(1,1,2,1,0),(2,3,5,1,0),(3,5,7,0,1),(4,5,7,2,0),(5,7,11,0,2).上述结果证实了Erds和Stewart提出的一个猜想.     

晶态-非晶态复合锂离子导体的电学性质

本文研究了晶态LiCl-非晶态Li₂O·3B₂O₃复合锂离子导体的电学性质。实验发现这种晶态-非晶态新型复合离子导体的电学性质变化具有新的现象,即在宏观电导率σ_m-组成曲线上出现了电导率增加的“双峰”效应。相应地,在表观活化能E_m-组成曲线和介电常数ε_m-组成曲线上出现了“双谷”。本文还详细讨论了这些实验现象,得到了与理论相符合的结果。 关键词：