锰结核中硅,铝,铁,镁,磷,钾,锰,钛的XRFA

本文叙述了用XRF分析锰结核中Si、Al、Fe、Mg、P、K、Mn和Ti的方法。按照通常锰结核的主次成分制备6个人工合成标准,根据Sherman方程计算了已知成分(二元系统)的相对强度。用L-T方求得了互致元素校正的理论α系数(基本的、混合的、修正的),用DATAFLEX151B计算机以BASIC语言汇了“PRA,APU”计算机程序。然后进行非线性回归分析了锰结核样品得到了满意的结果。     

Superferromagnetic state of α-Fe in Fe implanted Co6Ag94 studied by Mössbauer spectroscopy

After having introduced by ion implantation ⁵⁷Fe to a local concentration of 7 at% into Co₆Ag₉₄, we observed it by conversion electron Mössbauer spectroscopy in the as-prepared state and after isochronal annealing. A superferromagnetic state is inferred, which is correlated with the ordering of the magnetic moments on the Fe clusters through chain-like or dendritic Co/Fe linear structures. The magnetic moment disordering temperature lies above 473 K.     

Decentered twisted Gaussian Schell-model beams and their propagation through a misaligned first-order optical system

The propagation properties of decentered twisted Gaussian Schell-model (DTGSM) beams passing through a misaligned first-order optical system are studied. The explicit expressions for the cross-spectral density function and Wigner distribution function of the output beam are derived, which retain their form unchanged. It is shown that the DTGSM beams preserve their closed property. The second-order moments matrix and the Wigner distribution function evolve with the usual laws, whereas the first-order moments matrix varies, as if a ray passes through such system. The propagation of DTGSM beams through an aligned first-order optical system is treated as the limiting case that corresponds to the vanishing misalignment parameters.     

Synthesis for robust synchronization of chaotic systems under output feedback control with multiple random delays

Synchronization under output feedback control with multiple random time delays is studied, using the paradigm in nonlinear physics—Chua’s circuit. Compared with other synchronization control methods, output feedback control with multiple random delay is superior for a realistic synchronization application to secure communications. Sufficient condition for global stability of delay-dependent synchronization is established based on the LMI technique. Numerical simulations fully support the analytical approach, in spite of the random delays.     

Curran猜想的解答

本文确定了能作为有限群自同构群的Ｐ－群的最佳下最，彻底解决了Ｃｕｒｒａｎ在１９８９年提出的关于此最佳下界的三个猜想。     

纳米CeO2的形貌控制与表征

以Ce(NO3)3·6H2O和(NH4)2CO3为沉淀源,利用柠檬酸作为络合剂和分散剂,实现了对CeO2前驱体的形貌和尺寸控制,并采用TEM,TGA和XRD等方法对前驱体及其热分解所得纳米CeO2的形貌及结晶性等进行了表征.结果表明,随着柠檬酸加入量的提高,前驱体形貌从纳米线向类球形颗粒变化,焙烧生成的纳米CeO2颗粒的形貌具有明显继承性,所得CeO2属于立方萤石结构,且随焙烧温度的提高,晶化程度增大.     

乌江流域沉积岩风化过程中稀土元素的富集与释放

以乌江流域石灰岩、白云质灰岩、白云岩、硅质岩、页岩和砂岩等沉积岩的13条风化剖面为对象，运用R型分层聚类分析和质量平衡计算方法，研究了这些岩石风化过程中稀土元素（REE）的富集与释放及其对植物生长和河水REE分布的影响，目的是为河水物质来源研究和为农业生产提供依据。结果表明：（1）乌江流域石灰土中REE的富集程度显著高于各自母岩、黄壤、上陆壳（UCC）、中国土壤（CS）和世界土壤（WS）；（2）沉积岩风化过程中REE的富集特征和机制可能与母岩中REE分布特征以及风化剖面中有机质、铁（氢）氧化物和粘土矿物的吸附有关；（3）沉积岩风化过程中释放的REE可为植物吸收利用；（4）石灰岩等沉积岩风化过程中REE和F。等元素的释放对河水溶解态REE的分布有重要影响。     

Coronal multi-walled silicon nanotubes

By means of first-principles density functional theory(DFT) calculations and molecular dynamics(MD) simulations,a series of coronal multi-walled silicon nanotubes(MWSiNTs) without or with hydrogen terminations are systematically identified.Notably,coronal MWSiNTs,where the interaction between the walls is preferable through covalent bonds rather than weak interaction,show better stability than CNT-like SiNTs. Moreover,they exhibit good elasticity with small Young’s modulus.The investigation of the electronic structure demonstrates that they present metallic characteristics,which is in striking contrast to bulk silicon.Thus,the MWSiNTs may find important applications in electronic devices.     

氦气提纯技术发展现状与应用分析

为实现氦气资源的循环利用,有必要对氦气进行回收纯化。文中对目前国内外氦气的提纯技术发展现状进行了分析介绍,并综合分析比较了这些方法的应用原理、优缺点及发展趋势,针对各自的使用特点,给出了几种详细的提纯工艺实现方法,为促进我国氦气提纯技术的发展提供了新的思路。     

Selective recognition and electrochemical detection of p-nitrophenol based on a macroporous imprinted polymer containing gold nanoparticles

We have combined the molecular imprinting and the layer-by-layer assembly techniques to obtain molecularly imprint polymers (MIPs) for the electrochemical determination of p-nitrophenol (p-NPh). Silica microspheres functionalized with thiol groups and gold nanoparticles (Au-NPs) were assembled on a gold electrode surface layer by layer. The electrode was then immersed into a solution of pyrrole and p-NPh (the template), and electropolymerization led to the creation of a polymer-modified surface. After the removal of the silica spheres and the template, electrochemical impedance spectroscopy and differential pulse voltammetry (DPV) were employed to characterize the surface. The results demonstrated the successful fabrication of macroporous MIPs embedded with Au-NPs on the gold electrode. The effects of monomer concentration and scan rate on the performance of the electrode were optimized. Excellent recognition capacity is found for p-NPh over chemically similar species. The DPV peak current is linearly related to concentration of p-NPh in the 0.1 μM to 1.4 mM range, with a 0.1 μM limit of detection (at S/N?=?3).