A Note on Quantum Bell Nonlocality and Quantum Entanglement for High Dimensional Quantum Systems

We study the Bell nonlocality of high dimensional quantum systems based on quantum entanglement. A quantitative relationship between the maximal expectation value B of Bell operators and the quantum entanglement concurrence C is obtained for even dimension pure states, with the upper and lower bounds of B governed by C.

     

Quantifying the quantumness of ensembles via generalized α-z-relative rényi entropy

International Journal of Theoretical Physics - Quantifying the quantumness of ensembles is a vital and practical task in quantum information theory. In this paper, we quantify the quantumness of...     

测量慢弛豫介质的非线性折射率Z扫描方法

对非线性折射率慢弛豫介质的Z扫描理论进行了详细推导,得到了透射光场的表达式.分析表明:对于慢弛豫介质,其Z扫描过程也是非线性折射的累积过程.实验结果与理论分析一致. 关键词：     

Effect of Molecular Weight on Liquid Crystal Photoalignment by Photosensitive Polyester Containing Thrifluoromethyl Moieties

We investigate the liquid-crystal （LC） alignment direction on photoalignment films formed from photosensitive polyester containing thrifluoromethyl moieties （PPDA） with various molecular weights by crossed polarized optical microscopy. It is found that LC alignment behaviour changes with molecular weight of PPDA. The LC alignment on PPDA irradiated films with the highest molecular weight is homogeneous, while those with low and intermediate molecular weights are homeotropic. However, surface morphologies show weak dependence on molecular weight. The surfaces are smooth and there is no clear morphological anisotropy on these aligned films observed by an atomic force microscope. The surface energies of the irradiated films are also measured by using an indirect contact-angle method where both surface energy and its polar component, increase with increasing molecular weight. Different polar surface energies can be considered as a main reason for different alignment characteristics.     

聚丙烯酰胺/醋酸铬与聚丙烯酰胺/酚醛胶态分散凝胶的纳米颗粒自组织分形结构

采用原子力显微镜 ,分别对无机交联体系聚丙烯酰胺 Cr3+ 和有机交联体系聚丙烯酰胺 酚醛胶态分散凝胶的微观结构进行了显微图像分析 .发现无论是在有机还是无机交联体系中 ,也无论聚丙烯酰胺和交联剂浓度如何变化 ,在微米尺度上最终形成的都是具有自相似性的树枝状分形图像 ,在更小尺度上则发现单个小树杈分形体都是由纳米级的颗粒紧密堆积而成 .在所研究的胶态分散凝胶体系中 ,树枝状分形结构的形成及其具体的形态取决于聚丙烯酰胺的浓度 ,而交联剂的有无及其多少只对树枝状凝胶分形的几何形态产生一定影响 .实验结果还表明纳米级 (≤ 10 0nm)的胶体颗粒构成的分形结构的凝胶其弹性模量G′比微米级的高出一个数量级 .且粒子尺度越小 ,则凝胶的力学稳定性越强     

{Cu[H_2NC(CH_2OH)_3]_2}{Pic}_2·H_2O的合成与晶体结构

三羟甲基氨基甲烷与苦味酸(Pic)铜在乙醇水混合液中反应,制得少见的不对称氢键连接的超分子化合物{Cu[H2NC(CH2OH)3]2}{Pic}2?H2O。晶体属三斜晶系,空间群为P ,晶胞参数为a = 6.894(1),b = 8.219(1),c = 13.543(3) ? ?= 79.290(1),?= 8 3.36(2), ?= 84.590(1)埃轿狢20H30CuN8O22,V = 746.9(2) 3,Z = 1,Dc = 1.774 g/cm3,F(000) = 411,?= 0.844 mm-1,R = 0.0334,Rw = 0.0863。在配合物的结构单元中, Cu2+位于对称中心,分别与2个四齿配体(三羟甲基氨基甲烷)中的2个OH,1个NH2,三齿配位,呈笼状螯合。而另一个OH,因配体和中心离子构型的限制,不参与配位。     

Synthesis and Crystal Structure of a Novel Layered Lead(Ⅱ) Carboxylate-sulfonate Compound Templated by 4,4''-Bipyridine

A new lead(Ⅱ) carboxylate-sulfonate has been hydrothermally synthesized and characterized by X-ray single-crystal and elemental analyses. It crystallizes in triclinic, space group P,(1) with a=8.1573(6), b=9.4663(7), c=12.7488(9) (A), α=89.2320(10), β=80.7380(10), γ=77.9760(10)°, Z=2, V=950.10(12) (A)3, Mr=599.57, Dc=2.096 g/cm3, μ=9.032 mm-1, F(000)=572, the final R=0.0412 and wR=0.1035. It has a 1D chain structure, and the Pb(Ⅱ) is six-coordinated. Two PbO6 polyhedra are interconnected via edge-sharing into a two-core unit. Such units are further interconnected by 3-sulfonato-benzoic acids into 1D chains which are linked by hydrogen bonds into a layer structure. The 4,4'-bipyridines are located at the interlayer space and link the layers into a supramolecular structure by π-π stacking interactions.     

耐高温α-淀粉酶结合Ca2+的研究

测定了耐高温α-淀粉酶分子中含10个Ca2+,脱钙酶逐量补钙后的活力及稳定性研究表明:酶分子中前8个Ca2+参与酶的催化作用,后2个Ca2+抖对酶结构起稳定作用.脱钙酶加钙后室温下的荧光光谱和CD谱表明:酶的构象虽有变化,但不显著,说明酶的构象对ca2+的依赖性很小.脱钙酶结合不同数目的Ca2+,于90℃加热15 min后,测其荧光光谱,结果表明,结合10个Ca2+时,酶保持最大的稳定构象;CD谱表明脱钙酶加热时仍具有一定的螺旋结构.这再次说明,酶的构象对ca2+依赖性较低.     

超高交联吸附树脂对芳香有机物的吸附机理

通过3种吸附树脂AmberliteXAD-4、AM-1和JX101对芳香化合物苯胺、苯酚和苯甲酸在不同温度下的吸附特征,利用前线轨道理论进行了合理解释。结果表明,吸附剂表面进行适当的修饰,可以改变吸附剂的LUMO或HOMO,使吸附质分子与吸附剂表面的功能基产生化学作用,从而产生额外的化学吸附量,为优化设计吸附剂提供了理论指导。     

超高交联树脂对苯胺的吸附机理研究

在静态条件下，研究了水溶液中超高交联树脂AM－1和NJ－8及大孔吸附树脂Amberlite XAD－4吸附苯胺的热力学特性，测定了不同温度下的吸附等温线。结果表明，在稀溶液中3种树脂吸附苯胺都符合Langmuir和Freundlich模型，其中AM－1和NJ－8对苯胺的吸附是一个吸热过程；由于AM－1和NJ－8的微孔结构和表面存在酸性基团的吸附中心，对苯胺的吸附是物理吸附和化学吸附共同作用的结果。