Discrimination of carbonyl groups of meso-α-diketones with Horner-Wadsworth-Emmons reagent of chiral binaphthyl esters

Asymmetric Horner-Wadsworth-Emmons reactions of selected meso-α-dicarbonyl compounds with chiral phosphonate reagents, which possessed axially dissymmetric 1,1′-bi-2- or 8-naphthol at the carboxylate moiety as a chiral auxiliary, were examined. The reactions proceeded smoothly with good chemical yields as well as with high diastereoselectivities. Z-olefins were preferentially formed, and it was found that the free hydroxy group at the 2′- or 8′-position on the naphthalene ring plays a crucial role in the high diastereoselectivity, probably due to a complex-induced proximity effect. Mechanistic considerations are also described.     

Effect of omega-hydrogenation on the adsorption of fluorononanols at the hexane/water interface: pressure effect on the adsorption of fluorononanols

The interfacial tension gamma of the hexane solution of 1H,1H-perfluorononanol (FDFC(9)OH) and its omega-hydrogenated analogue, 1H,1H,9H-perfluorononanol (HDFC(9)OH), against water was measured as a function of pressure and concentration at 298.15 K in order to clarify the effect of omega-dipole on the orientation of fluorononanol molecules from the viewpoint of volume. The adsorbed films of both alcohols exhibit two kinds of phase transitions among three different states: the gaseous, expanded, and condensed states. The partial molar volume changes of adsorption - in the expanded and condensed states were evaluated and compared between the two systems. The - values of both alcohols are negative, and thus the alcohol molecules have smaller volume in the adsorbed film than in the bulk solution. Furthermore, the value was obtained through the evaluation of by the density measurement of the bulk hexane solution. It was found that the value of HDFC(9)OH is smaller than that of FDFC(9)OH in the condensed state. On the basis of three matters concerning the molecular structure of alcohols, the occupied area at the interface, and the orientation of FDFC(9)OH in the adsorbed film deduced from the earlier results of X-ray reflectivity measurement, the mean tilt angle of HDFC(9)OH from the interface normal in the condensed film was estimated to be 15 degrees . The thermodynamic estimation demonstrated here is highly valuable one to provide structure information on an adsorbed film.     

Estimation of useful yields for electrospray droplet impact/secondary ion mass spectrometry (EDI/SIMS)

Useful yield for electrospray droplet impact/secondary ion mass spectrometry was estimated. The mixtures of C₆₀/rhodamine B and C₆₀/Aerosol OT were used as the samples for the positive and negative mode of operations, respectively. By assuming that (i) the desorption efficiencies are about the same for C₆₀, rhodamine B and Aerosol OT, and (ii) desorption of ionic compounds directly gives the secondary ion signals, the useful yields (i.e. total ions generated divided by the total molecules desorbed) for C₆₀ were estimated to be ~0.1. This value should be regarded as the upper limit because the neutralization of positive and negative ions in the plume and desorption of ionic compounds as neutral species are not taken into account. Copyright © 2012 John Wiley & Sons, Ltd.     

Complex formation of light and heavy lanthanides with DGA and DOODA,and its application to mutual separation in DGA–DOODA extraction system

We studied the stepwise formation constants (β) of water-soluble diglycolamide (DGA) and dioxaoctanediamide (DOODA) for the mutual separation of Ln in a solvent extraction system. TODGA (N,N,N?,N?-tetraoctyl-diglycolamide) and DOODA(C8) (N,N,N?,N?-tetraoctyl-dioxaoctanediamide) exhibit opposite behaviors in extracting both light and heavy Ln through Ln-patterns. Metal complexes of two- and three-folding with water-soluble DOODA and DGA, respectively, were found, and each β value was calculated using distribution ratios. Taking β, their distribution ratio, D, and separation factor, SF, values into consideration, the suitable separation conditions (aqueous phase: 30 mM DOODA(C2) in 1 M HNO₃; organic phase: 0.1 M TODGA in n-dodecane) of multistage extraction (10?×?10 extraction using aqueous and organic phases, including one sample solution) were determined. In this study, La, Pr, and Nd were mainly present in the aqueous phase, whereas Sm–Dy existed in the organic phase. Although these two groups can be easily separated into two phases, the resolution, Rs, values provide for little mutual separation between La–Nd and Sm–Dy under the present conditions.

     

meso‐(2‐Pyridyl)‐boron(III)‐subporphyrin: Perimeter Iridium(III) Coordination

Peripherally metalated porphyrinoids are promising functional π‐systems displaying characteristic optical, electronic, and catalytic properties. In this work, 5‐(2‐pyridyl)‐ and 5,10,15‐tri(2‐pyridyl)‐B^III‐subporphyrins were prepared and used to produce cyclometalated subporphyrins by reactions with [Cp*IrCl₂]₂, which proceeded through an efficient C?H activation to give the corresponding mono‐ and tri‐Ir^III complexes, respectively. While the mono‐Ir^III complex was obtained as a diastereomeric mixture, a C₃‐symmetric tri‐Ir^III complex with the three Cp*‐units all at the concave side was predominantly obtained in a high yield of 90 %, which displays weak NIR phosphorescence even at room temperature in degassed CH₂Cl₂, differently from the mono‐Ir^III complexes.     

Stable meso–meso‐Linked 2NH‐Corrole Radical Dimers as a Key Intermediate to Corrole Tape

While oxidation of 5,5′,15,15′‐tetramesityl‐10‐10′‐linked 3NH‐corrole dimer with DDQ gave the corresponding triply linked 2NH‐corrole tape, the use of an equimolar amount of p‐chloranil as a milder oxidant resulted in the formation of a 10‐10′‐linked neutral 2NH‐corrole radical dimer as a stable product. The stability of this peculiar product is ascribed largely to strong antiferromagnetic interaction of the two spins. Further oxidation of this diradical produced corrole tape, suggesting its involvement as a reaction intermediate to the corrole tape. Oxidation of 10‐10′‐linked bis‐pyridine‐coordinated Co^III corrole dimer with DDQ produced a cobalt corrole radical dimer and a doubly linked corrole dimer both as stable compounds bearing pyridine and cyanide axial ligands. This type of oxidative transformation involving neutral diradical intermediates is a unique reaction mechanism specific for corrole dimers.     

Induced Fitting and Polarization of a Bromine Molecule in an Electrophilic Inorganic Molecular Cavity and Its Bromination Reactivity

Dodecavanadate, [V₁₂O₃₂]^4? (V12), possesses a 4.4 Å cavity entrance, and the cavity shows unique electrophilicity. Owing to the high polarizability, Br₂ was inserted into V12, inducing the inversion of one of the VO₅ square pyramids to form [V₁₂O₃₂(Br₂)]^4? (V12(Br2)). The inserted Br₂ molecule was polarized and showed a peak at 185 cm^?1 in the IR spectrum. The reaction of V12(Br2) and toluene yielded bromination of toluene at the ring, showing the electrophilicity of the inserted Br₂ molecule. Compound V12(Br2) also reacted with propane, n‐butane, and n‐pentane to give brominated alkanes. Bromination with V12(Br2) showed high selectivity for 3‐bromopentane (64 %) among the monobromopentane products and preferred threo isomer among 2‐,3‐dibromobutane and 2,3‐dibromopenane. The unique inorganic cavity traps Br₂ leading the polarization of the diatomic molecule. Owing to its new reaction field, the trapped Br₂ shows selective functionalization of alkanes.     

High-temperature protonic motion and low-temperature lattice deformation in one-dimensional hydrogen-bonded molecular chain in tetramethylpyrazine–chloranilic acid (1:1)

Recent theoretical advances have identified several computational algorithms that can be implemented utilizing quantum information processing (QIP), which gives an exponential speedup over the corresponding (known) algorithms on conventional computers. QIP makes use of the counter-intuitive properties of quantum mechanics, such as entanglement and the superposition principle. Unfortunately it has so far been impossible to build a practical QIP system that outperforms conventional computers. Atomic ions confined in an array of interconnected traps represent a potentially scalable approach to QIP. All basic requirements have been experimentally demonstrated in one and two qubit experiments. The remaining task is to scale the system to many qubits while minimizing and correcting errors in the system. While this requires extremely challenging technological improvements, no fundamental roadblocks are currently foreseen.     

Classification Performance of a Low Pressure Differential Mobility Analyzer for Nanometer-sized Particles

Size distribution measurements and classification tests by a low pressure differential mobility analyzer (LPDMA) for nanometer-sized silver particles and cesium iodide particles under low pressure conditions (123–300 Torr) were performed using a transmission electron microscope (TEM) and the tandem DMA technique. When the ratio of the sheath gas flow rate and the aerosol gas flow rate was set at 5 : 1, the targeted sizes calculated from the classification voltage applied to the LPDMA at 160 Torr are found to be in good correlation with the count mean Feret diameter obtained from the TEM observation of the particles collected after a classification ranging from 6 to 25 nm, although the targeted sizes set by the LPDMA were approximately 15% greater than the count mean Feret diameter measured by the TEM after classification. The geometric standard deviations of DMA-classified particles measured by TEM and those obtained from the tandem DMA method ranged from 1.08 to 1.17 and from 1.05 to 1.13, respectively. They were slightly greater than the ideal geometric standard deviations (1.05) of the particles classified with the LPDMA, which was calculated by neglecting the broadening effects due to Brownian diffusion. We experimentally demonstrated the validity of our LPDMA system for size measurements and classification of the nanometer-sized particles under low pressure conditions.