Dynamics of Drop Formation in an Electric Field

The effect of an electric field on the formation of a drop of an inviscid, perfectly conducting liquid from a capillary which protrudes from the top plate of a parallel-plate capacitor into a surrounding dynamically inactive, insulating gas is studied computationally. This free boundary problem which is comprised of the surface Bernoulli equation for the transient drop shape and the Laplace equation for the velocity potential inside the drop and the electrostatic potential outside the drop is solved by a method of lines incorporating the finite element method for spatial discretization. The finite element algorithm employed relies on judicious use of remeshing and element addition to a two-region adaptive mesh to accommodate large domain deformations, and allows the computations to proceed until the thickness of the neck connecting an about to form drop to the rest of the liquid in the capillary is less than 0.1% of the capillary radius. The accuracy of the computations is demonstrated by showing that in the absence of an electric field predictions made with the new algorithm are in excellent agreement with boundary integral calculations (Schulkes, R. M. S. M. J. Fluid Mech. 278, 83 (1994)) and experimental measurements on water drops (Zhang, X., and Basaran, O. A. Phys. Fluids 7(6), 1184 (1995)). In the presence of an electric field, the algorithm predicts that as the strength of the applied field increases, the mode of drop formation changes from simple dripping to jetting to so-called microdripping, in accordance with experimental observations (Cloupeau, M., and Prunet-Foch, B. J. Aerosol Sci. 25(6), 1021 (1994); Zhang, X., and Basaran, O. A. J. Fluid Mech. 326, 239 (1996)). Computational predictions of the primary drop volume and drop length at breakup are reported over a wide range of values of the ratios of electrical, gravitational, and inertial forces to surface tension force. In contrast to previously mentioned cases where both the flow rate in the tube and the electric field strength are nonzero, situations are also considered in which the flow rate is zero and the dynamics are initiated by impulsively changing the field strength from a certain value to a larger value. When the magnitude of the step change in field strength is small, the results of the new transient calculations accord well with those of an earlier stability analysis (Basaran, O. A., and Scriven, L. E. J. Colloid Interface Sci. 140(1), 10 (1990)) and thereby provide yet another testament to the accuracy of the new algorithm. Copyright 1999 Academic Press.     

Compounds of palladium halides with substituted imidazoles

Summary Compounds of the type PdL₂X₂ (L=1-methylimidazole, 1-vinylimidazole, 1-n-butylimidazole, 1,2-dimethylimidazole, 1-vinyl-2-methylimidazole, 1,2-dimethyl-5-nitroimidazole, 2-isopropyl-4(5)-nitroimidazole and 2-methyl-4(5)-nitro-imidazole; X=Cl or Br) are obtained by treating PdX₂ (1 mole) with solutions of the ligands L (2 moles). An excess of L gives PdL₄X₂ complexes (L=1-methylimidazole, 1-vinylimidazole, 1,2-dimethylimidazole and 1-vinyl-2-methylimidazole). The compounds were characterized by chemical analyses, molar conductivity measurements and i.r. spectra.     

Nondestructive Monitoring of Sucrose Diffusion in Oil-in-Water Emulsions by Ultrasonic Velocity Profiling

The diffusion of sucrose through an optically opaque oil-in-water emulsion was monitored nondestructively by measuring the ultrasonic velocity as a function of height. Initially, a corn oil-in-water emulsion (0, 5, 10, 15, or 20 wt% oil) stabilized by Tween 20 (1 wt%) and xanthan (1 wt%) was placed in a measurement cell at 30°C. A 20 wt% sucrose solution containing the same concentration of Tween 20 and xanthan as the aqueous phase in the emulsion was placed on top of the emulsion. The ultrasonic velocity of this two-layer system was measured as a function of sample height and time and then converted into sucrose and oil concentration–distance profiles using empirical calibration curves. The translational diffusion coefficient of the sucrose in the upper and lower layers was determined by fitting the experimental data to a Fickian diffusion model. The measured diffusion coefficients of the sucrose molecules decreased as the droplet concentration in the emulsion increased, indicating retardation of the sugar molecule movement. Ultrasonic profiling was also used to monitor the compression of the emulsion due to movement of water molecules into the upper layer.     

Investigation of Raman,FT-IR,EPR spectra and antimicrobial activity of 2-(5-H/Me/Cl-1<Emphasis Type="BoldItalic">H</Emphasis>-benzimidazol-2-yl)-phenol ligands and their Fe(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> complexes

2-(5-H/Me/Cl-1H-benzimidazol-2-yl)-phenol ligands form 1:1 electrolytes, 5-coordinate monometallic complexes with iron(III) nitrate. The geometry of the [Fe(L)(OH)(H₂O)₂](NO₃) complexes was derived from theoretical calculation in DGauss/DFT level (DZVP basis set) on CACHE. In all of the complexes the ligands are bidentate, via one imine nitrogen atom and phenolate oxygen atom. The coordination is completed with a hydroxide ion, and two water molecules, adopting a distorted square pyramidal geometry. The structures of the compounds were confirmed on the basis of elemental analysis, molar conductivity, magnetic moment, FT-Raman, FT-IR (mid-IR, far-IR), EPR and u.v.–vis. The antimicrobial activities of the free ligands, their hydrochloride salts, and the complexes were evaluated using the disk diffusion method in dimethyl sulfoxide (DMSO) as well as the minimal inhibitory concentration (MIC) dilution method, against nine bacteria and the results are compared with several known antibiotic agents. Antifungal activities were reported for Candida albicans, Kluyveromyces fragilis, Rhodotorula rubra, Debaryomyces hansenii, Hanseniaspora guilliermondii, and the results were referenced against nystatin, ketaconazole, and clotrimazole antifungal agents. In most cases, the compounds tested showed broad-spectrum (Gram⁺ & Gram⁻ bacteria) activities that were either more active or as potent as the references.     

Effects of soluble surfactants on the deformation and breakup of stretching liquid bridges

Surfactants are routinely used to control the breakup of drops and jets in many applications such as inkjet printing, crop spraying, and DNA or protein microarraying. The breakup of surfactant-free drops and jets has been extensively studied. By contrast, little is known about the closely related problem of interface rupture when surfactants are present. Solutions of a nonionic surfactant, pentaethylene glycol monododecyl ether, or C12E5, in water and in 90 wt % glycerol/water are used to show the effects of surfactant and viscosity on the deformation and breakup dynamics of stretching liquid bridges. Equilibrium surface tensions for both solutions can be fitted with the Langmuir-Szyskowski equation. All experiments have been done at 24 degrees C. The critical micelle concentrations for C12E5 are 0.04 and 0.4 mM in water and the glycerol/water solution, respectively. With high-speed imaging, the dynamic shapes of bridges held captive between two rods of 3.15 mm diameter are captured and analyzed with a time resolution of 0.1-1 ms. The bridge lengths are 3.15 mm initially and about 5-7 mm at pinch-off. Breakup occurs after stretching for about 0.2-0.3 s, depending on the solution viscosity and the surfactant concentration. When the liquid bridges break up, the volume of the sessile drop left on the bottom rod is about 3 times larger than that of the pendant drop left on the top rod. This asymmetry is due to gravity and is influenced by the equilibrium surface tensions. Surfactant-containing low-viscosity water bridges are shown to break up faster than surfactant-free ones because of the effect of gravity. With or without surfactant, water bridges form satellite drops. Surfactant-containing high-viscosity glycerol/water bridges break up more slowly than surfactant-free ones because of strong viscous effects. Moreover, the shapes of the sessile drops close to breakup exhibit a "pear-like" tip; whether a satellite forms depends on the surface age of the bridge before stretching commences. These unexpected effects arising from the addition of surfactants are due to the capillary pressure reduction and Marangoni flows linked to dynamic surface tension.     

Oriented Crystallization on Organic Monolayers to Control Concomitant Polymorphism

Nucleation events and crystal growth can be guided by molecular recognition at interfaces through intermolecular interactions. The short-acting antimicrobial sulfa drug sulfathiazole is known for its concomitant crystallization, which has five known polymorphs, due to conformational flexibility and hydrogen-bond synthon variation. In its development stage of a drug the issue of concomitant crystallization needs to be addressed with respect to patent litigation, including legal actions to protect patents against infringement. A functional self-assembled monolayer (SAM) of organic thiol on a gold surface has been employed as an efficient approach to control concomitant nucleation of such flexible drugs. The crystallization on a SAM surface is mostly kinetically driven and often leads to the nucleation of novel metastable forms. Spectroscopic, thermal analysis and X-ray diffraction studies reveal that a previously unknown, sixth form of the drug nucleates on the designed SAM surface.     

Synthesis of Mixed Alkylphosphites and Alkylphosphates

Some mixed phosphites having two different alkyl chain were obtained as forerunners for mixed phosphates Mixed dialkyl phosphates were obtained in good yields (40-80%) by phase transfer catalysis in liquid-liquid sistem, starting from different dialkyl phosphites and aliphatic alcohols. The reaction conditions were optimized in order to obtain good yields in phosphites and phosphates respectively. Compounds were analyzed by IR, P 31 -NMR.     

O-Aryloxime ether analogues as novel and efficient ligands for palladium-catalyzed Suzuki–Miyaura coupling in water

O-Aryloxime ether analogues L1–L3 were studied as ligands in palladium-catalyzed Suzuki–Miyaura cross-coupling reaction of aryl bromides and aryl boronic acids in water at room temperature. Reaction conditions for the cross-coupling were optimized using PdCl₂ and Pd(OAc)₂ under aerobic condition. From the three electronically diverse O-aryloxime ether ligands studied herein, the use of 1-phenyl-ethanone O-(4-chloro-phenyl)-oximeL2 exhibits the best catalytic system in the presence of K₂CO₃ as the base and TBAB as the promoter.     

Trash GGBFS-based geopolymer as a novel sunlight-responsive photocatalyst for dye discolouration

In this study, we report a waste material-ground granulated blast furnace slag (GGBFS) as a low cost geopolymer, hybridised with ZnO to form a novel and efficient photocatalyst capable of discolouring textile wastewater. GGBFS is a waste material in an iron industry. Methylene blue was used as the probe dye and natural sunlight was used for activation of the photocatalyst. It was observed that under the experimental conditions, ZnGP-40 exhibited twice the discoloration efficiency than conventionally used ZnO or TiO₂. This enhanced performance is majorly attributed to increased surface area of ZnO when strewn in the GGBFS matrix. The photocatalysts were characterized by SEM, TEM, PSA, TGA, BET and UV–Vis/NIR. The effect of photocatalyst loading, speed of agitation and solar insolation has also been studied. Since this study has been performed in direct sunlight, it exhibits a realizable application of solar energy in the treatment of wastewater.     

Chemical Composition of a Novel Distillate from Fermented Mixture of Nine Anti-Inflammatory Herbs and Its UVB-Protective Efficacy in Mouse Dorsal Skin via Attenuating Collagen Disruption and Inflammation

Since ancient times, various herbs have been used in Asia, including Korea, China, and Japan, for wound healing and antiaging of the skin. In this study, we manufactured and chemically analyzed a novel distillate obtained from a fermented mixture of nine anti-inflammatory herbs (Angelica gigas, Lonicera japonica, Dictamnus dasycarpus Turcz., D. opposita Thunb., Ulmus davidiana var. japonica, Hordeum vulgare var. hexastichon Aschers., Xanthium strumarium L., Cnidium officinale, and Houttuynia cordata Thunb.). The fermentation of natural plants possesses beneficial effects in living systems. These activities are attributed to the chemical conversion of the parent plants to functional constituents which show more potent biological activities. In our current study, the distillate has been manufactured after fermenting the nine oriental medical plants with Lactobacillus fermentum, followed by distilling. We analyzed the chemical ingredients involved in the distillate and evaluated the effects of topical application of the distillate on ultraviolet B (UVB)-induced skin damage in Institute of Cancer Research (ICR) mice. Topical application of the distillate significantly ameliorated the macroscopic and microscopic morphology of the dorsal skin against photodamage induced by UVB radiation. Additionally, our current results showed that topical application of the distillate alleviated collagen disruption and reduced levels of proinflammatory cytokines (tumor necrosis factor alpha and interleukin 1 β expressions) in the dorsal skin against UVB radiation. Taken together, our current findings suggest that the distillate has a potential to be used as a material to develop a photoprotective adjuvant.