Kaolin-catalysed one-pot synthesis of thiophene containing aminonaphthols under solvent-free condition and their in vitro anticancer and antioxidant activity

Research on Chemical Intermediates - An efficient and eco-friendly synthetic protocol via a one-pot three-component reaction to yield thiophene containing aminonaphthols (Betti bases) is reported....     

Trash GGBFS-based geopolymer as a novel sunlight-responsive photocatalyst for dye discolouration

In this study, we report a waste material-ground granulated blast furnace slag (GGBFS) as a low cost geopolymer, hybridised with ZnO to form a novel and efficient photocatalyst capable of discolouring textile wastewater. GGBFS is a waste material in an iron industry. Methylene blue was used as the probe dye and natural sunlight was used for activation of the photocatalyst. It was observed that under the experimental conditions, ZnGP-40 exhibited twice the discoloration efficiency than conventionally used ZnO or TiO₂. This enhanced performance is majorly attributed to increased surface area of ZnO when strewn in the GGBFS matrix. The photocatalysts were characterized by SEM, TEM, PSA, TGA, BET and UV–Vis/NIR. The effect of photocatalyst loading, speed of agitation and solar insolation has also been studied. Since this study has been performed in direct sunlight, it exhibits a realizable application of solar energy in the treatment of wastewater.     

Surface correlations of hydrodynamic drag for transitionally rough engineering surfaces

Rough surfaces are usually characterised by a single equivalent sand-grain roughness height scale that typically needs to be determined from laboratory experiments. Recently, this method has been complemented by a direct numerical simulation approach, whereby representative surfaces can be scanned and the roughness effects computed over a range of Reynolds number. This development raises the prospect over the coming years of having enough data for different types of rough surfaces to be able to relate surface characteristics to roughness effects, such as the roughness function that quantifies the downward displacement of the logarithmic law of the wall. In the present contribution, we use simulation data for 17 irregular surfaces at the same friction Reynolds number, for which they are in the transitionally rough regime. All surfaces are scaled to the same physical roughness height. Mean streamwise velocity profiles show a wide range of roughness function values, while the velocity defect profiles show a good collapse. Profile peaks of the turbulent kinetic energy also vary depending on the surface. We then consider which surface properties are important and how new properties can be incorporated into an empirical model, the accuracy of which can then be tested. Optimised models with several roughness parameters are systematically developed for the roughness function and profile peak turbulent kinetic energy. In determining the roughness function, besides the known parameters of solidity (or frontal area ratio) and skewness, it is shown that the streamwise correlation length and the root-mean-square roughness height are also significant. The peak turbulent kinetic energy is determined by the skewness and root-mean-square roughness height, along with the mean forward-facing surface angle and spanwise effective slope. The results suggest feasibility of relating rough-wall flow properties (throughout the range from hydrodynamically smooth to fully rough) to surface parameters.     

Imaging the In Vivo Degradation of Tissue Engineering Implants by Use of Supramolecular Radiopaque Biomaterials

For in situ tissue engineering (TE) applications it is important that implant degradation proceeds in concord with neo‐tissue formation to avoid graft failure. It will therefore be valuable to have an imaging contrast agent (CA) available that can report on the degrading implant. For this purpose, a biodegradable radiopaque biomaterial is presented, modularly composed of a bisurea chain‐extended polycaprolactone (PCL2000‐U4U) elastomer and a novel iodinated bisurea‐modified CA additive (I‐U4U). Supramolecular hydrogen bonding interactions between the components ensure their intimate mixing. Porous implant TE‐grafts are prepared by simply electrospinning a solution containing PCL2000‐U4U and I‐U4U. Rats receive an aortic interposition graft, either composed of only PCL2000‐U4U (control) or of PCL2000‐U4U and I‐U4U (test). The grafts are explanted for analysis at three time points over a 1‐month period. Computed tomography imaging of the test group implants prior to explantation shows a decrease in iodide volume and density over time. Explant analysis also indicates scaffold degradation. (Immuno)histochemistry shows comparable cellular contents and a similar neo‐tissue formation process for test and control group, demonstrating that the CA does not have apparent adverse effects. A supramolecular approach to create solid radiopaque biomaterials can therefore be used to noninvasively monitor the biodegradation of synthetic implants.     

Synthesis, characterization and proton transport properties of mixed metal phosphonate-zirconium titanium hydroxy ethylidene diphosphonate

Novel hybrid material, zirconium titanium hydroxy ethylidene diphosphonate (ZTHEDP) of the class of tetravalent bimetallic acid (TBMA) salt was synthesized using sol-gel route. ZTHEDP was characterized for elemental analysis (zirconium, titanium and phosphorus by ICP-AES and carbon and hydrogen by CHN analyzer), spectral analysis (FTIR), thermal analysis (TGA), X-ray diffraction studies and SEM. Chemical resistivity of this material was assessed in various media-acids, bases and organic solvents. The protons present in the structural hydroxyl groups in ZTHEDP indicate good potential to exhibit solid state proton conduction. The proton transport property of ZTHEDP was explored by measuring specific conductance at different temperatures in the range of 303–423 K at 10 K intervals, using Solartron Impedance Analyzer (SI 1260) over a frequency range 1 Hz-32 MHz at a signal level below 1 V. Zirconium hydroxy ethylidene diphosphonate (ZrHEDP) and titanium hydroxy ethylidene diphosphonate (TiHEDP) were also synthesized under identical conditions, characterized and their proton transport properties investigated for comparative studies. It is observed that, in all cases, conductivity decreases with increasing temperature. Conductivity performance of ZTHEDP, ZrHEDP and TiHEDP is discussed based on conductivity data and activation energy. It is observed that, ZTHEDP exhibits enhanced conductance and the mechanism of transportation is proposed to be Grotthuss type.     

Variation in chemical,colloidal and electrochemical properties of carbon nanotubes with the degree of carboxylation

Multiwalled carbon nanotubes (CNTs) were carboxylated via microwave irradiation where the treatment time was varied to alter the degree of functionalization, and as many as one in 15 carbons in the CNT could be oxidized. Chemical, physical, electrochemical, and colloidal behavior of the carboxylated CNTs was studied. All properties changed with the degree of functionalization to a point beyond which they appeared to remain constant. The surface area increased from 173.9 to 270.9 m²/g while the critical coagulation concentration (CCC) values increased from 142.14 to 168.69 mM in the presence of NaCl, and the corresponding increase was from 0.97 to 5.32 mM in the presence of MgCl₂. As seen from cyclic voltammetry curves, the functionalized CNTs showed mainly non-Faradic interactions with Na₂SO_4, but showed Faradic behaviors in alkaline KOH.     

Analytical Hartree–Fock wave functions for the atoms Cs to Lr

 Analytical approximations to Hartree–Fock wave functions are constructed using Slater-type functions for the ground states of all 49 neutral atoms from Cs (Z=55) to Lr (Z=103). The current compilation is more extensive and more accurate than previous ones. The wave functions are available upon request from the authors or from the Web page http://www.unb.ca/chem/ajit/download.htm on the Internet. Received: 6 December 1999 / Accepted: 29 February 2000 / Published online: 12 May 2000     

Quantum effects in a homogeneous dust cloud collapse

The status of a classical space-time singularity, when quantum effects are taken into account, has remained a matter of intense interest ever since the epochmaking paper of DeWitt [1] on quantum gravity. We examine here the evolution of quantum fluctuations in the vicinity of the singularity arising out of the classical collapse of a homogeneous dust cloud. As opposed to the pathintegral method used to quantize the conformal degree of freedom (see, e.g., [3] or [4]), we use here the traditional operator approach to the quantum theory which is much more direct and appealing while achieving an additional generalization that the wave function of the system is assumed to have a completely general form. It is shown that the quantum uncertainty diverges in the limit of approach to the classically singular epoch and that nonsingular, nonclassical states can occur with finite probability.     

Structural,magnetic and Mössbauer spectral studies of nanosize aluminum substituted nickel zinc ferrites

Nanosize aluminum substituted nickel zinc ferrites were prepared through aerosol route and characterized using TEM, XRD, magnetic measurements and Mössbauer spectroscopy. The particle size of as obtained samples was found to be ∼10 nm which increases up to ∼85 nm upon annealing at 1200 °C. The unit cell parameter ‘a’ decreases linearly with concentration of aluminum due to the small ionic radius of aluminum. The saturation magnetization for all the samples after annealing at 1200 °C lies in the range 12.9–72.6 emu/g and decreases linearly with concentration of aluminum. Room temperature Mössbauer spectra of all as obtained samples of ferrite compositions exhibited a broad doublet suggesting super paramagnetic nature. This doublet is further resolved into two doublets and assigned to the surface region and internal region atoms of the particles. The samples annealed at 1200 °C show broad sextets, which were fitted with five sextets, indicating different local environment of both tetrahedrally and octahedrally coordinated Fe cation.