高能核碰撞中带电多重数快度与能量和中心度的关系

用强子–弦级联模型JPCIAE及相应的Monte Carlo事例产生器研究相对论性核–核碰撞中带电粒子多重数的赝快度密度对能量和中心度的依赖关系.无需另调任何模型参数的条件下,此模型可以同时较好地描述相对论性pp实验数据及PHOBOS和PHENIX实验组的Au+Au实验数据.本文指出:因〈N_part〉并非严格定义的物理量,致使实验上和理论上确定〈N_part〉有一定任意性,从而使得每参加者核子对的带电粒子赝快度密度随着〈N_part〉的增加可能逐渐增大,也可能逐渐减小,因此用它来区分粒子产生机制是欠妥的.     

Nafion-PAN optical chemical sensor: optimization by FIA

A copper-sensitive optical chemical sensor (optrode) is described. The optrode is based on a Nafion membrane and an immobilized organic ligand coupled with a flow injection (FI) system. The FI system includes a flow-through removable measuring cell and a simple spectrophotometer. Owing to the miniature size of the system and the efficient use of optical fibers, this optrode is well suited for monitoring environmental water samples. The success of the described optrode system depends on the effectiveness of the FI reagent delivery system. Optimum contact time with the membrane (as determined by the reagent flow rates) and the injected sample volume are critical. Environmental water samples were analyzed for copper content using the optimized optrode system. To validate the optrode's performance, the same water samples were analyzed using the atomic absorption spectrophotometer.     

Observation and interpretation of HH coupling in 1H187Os satellite NMR spectra

The single hydride resonance observed for each of the compounds H₃Os₃(CO)₉CX (X = OMe, Br, H) has one set of ¹⁸⁷Os satellites which are further split into doublets by HH coupling. The implications of this observation for structural assignments based on ¹⁸⁷Os satellites are discussed.     

A comparative investigation of the fatty acid compositions of the seeds of a number of lines of a genetic collection of Gossypium hirsutum

A comparative analysis has been made of the amounts of lipids and their fatty-acid compositions in the seeds of the lines of agenetic collection of cotton plants of the speciesGossypium hirsutum and their hybrids and the variety Tashkent-1. The results obtained on the fatty-acid compositions of some hybrids make it possible to recommend the use of individual lines of cotton plants as donors for improving the food-value indices of cottonseed oil.Institute of Chemsitry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. V. I. Lenin Tashkent State University. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 173–176, March–April, 1991.     

Trace determination of organotin compounds in water,sediment and mussel samples by low-pressure gas chromatography coupled to tandem mass spectrometry

A fast method for the determination of eight organotin compounds (OTs), monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), tetrabutyltin (TeBT), monophenyltin (MPhT), diphenyltin (DPhT), triphenyltin (TPhT) and tetraphenyltin (TePhT), in water, sediments and mussels, was developed using low-pressure gas chromatography/tandem mass spectrometry (LPGC/MS/MS). The method is based on sodium diethyldithiocarbamate (DDTC) complexation of the ionic organotins, followed by extraction of the target matrices and derivatization by a Grignard reagent, as described in a previously published method for water samples. Solid-phase extraction was selected as extraction method from water samples after comparison with liquid-liquid extraction, but extraction of the OTs from sediment and mussel samples was performed using toluene. Matrix-matched calibration standards were used to minimize matrix effects. The analytical process was validated by the analysis of spiked blank samples. Performance characteristics such as linearity, detection limit (LOD), quantitation limit (LOQ), precision, and recovery were determined. Recoveries of OTs in spiked matrices ranged from 86-108% in water and from 78-110% in sediments and mussels, with precision values lower than 18%. Detection limits ranged from 0.1-9.6 ng L(-1) in water, and 0.03-6.10 microg kg(-1) in the other matrices. The present implementation of LPGC rather than conventional capillary GC permitted use of large-volume injection and reduced analysis time by a factor of two. The proposed methodology was applied to the determination of OTs in real samples of water, marine sediments and mussels from the west coast of the Mediterranean Sea (Spain).     

A Recyclable Trinuclear Bifunctional Catalyst Derived from a Tetraoxo Bis‐Zn(salphen) Metalloligand

A tetraoxo bis‐Zn(salphen) supramolecular host can bind various divalent metal salts, thereby providing access to trinuclear bifunctional systems that incorporate both Lewis acid sites and dynamically bound nucleophilic anions. The formation of these trinuclear species was investigated and their stability features were also determined. The application of these trinuclear complexes as bifunctional catalysts was evaluated in the formation of cyclic organic carbonates from epoxides and CO₂. The catalytic data, in combination with control experiments, clearly demonstrate that these trinuclear compounds show much higher recycling potential compared to various control compounds and they can be used in up to five cycles without an observable loss in activity. Furthermore, this new recyclable catalytic system does not require any additives and can be applied under solvent‐free conditions.     

Copper(II) complexes with a flexible oxamato ligand

We report on a convenient synthesis of the ligand precursor, diethylethylene-1,2-bis(oxamate), (Et₂H₂oeo, 1), and show how a partial and preferential hydrolysis of the ester group can give rise to the dianionic ligand, (H₂oeo)²⁻. Reaction of this ligand with Cu(II) affords the neutral dimeric species, [Cu₂(H₂oeo)₂], which has a low aqueous solubility. We describe the crystal structure of the hydrate Cu₂(H₂oeo)₂(H₂O)₄ (2) and report magnetic studies that show a weak exchange interaction in the solid. Under more basic conditions and in the presence of Cu(II) ions, we are able to avoid amide cleavage and yet deprotonate the amide group, resulting in the formation of the highly soluble [Cu(Hoeo)₂]⁴⁻ complex anion. The structure of (NBu₄)₄[Cu(Hoeo)₂](H₂O)₄ (3) is described and compared with the recently reported anhydrous phase.     

多功能两亲梳状聚合物的合成及包覆荧光量子点

利用溶液聚合和成酰胺反应合成了多功能梳状两亲性共聚物,聚(甲基丙烯酸-co-甲基丙烯酸十八酯)-(乙醇胺-乙二胺叶酸)(PSM-EE-FA).用红外光谱(FTIR),核磁共振(1H-NMR)及凝胶渗透色谱(GPC)表征了该聚合物的结构及分子量分布.实验结果证明合成了该聚合物,其数均分子量(Mn)为28600,多分散性为1.375.用该两亲梳状聚合物包覆油溶性CdSe/ZnS量子点,通过相转移作用,得到水溶性靶向量子点(PSM-EE-FA-QDs).该水溶性量子点溶液具有较好的稳定性.通过紫外-可见(UV-Vis)及荧光发射光谱分析对该量子点的光学性质进行研究.结果表明,PSM-EE-FA-QDs的紫外-可见光谱及荧光发射光谱峰形与原量子点基本一致.由于量子点表面聚合物层的形成,峰位发生少量红移.该量子点水溶液的荧光强度是原量子点氯仿溶液的98%,荧光产率是原量子点氯仿溶液的95%.动态光散射(DLS)及透射电镜(TEM)测试结果表明水溶性量子点分布均匀.合成的水溶性量子点不但光学性能稳定,而且聚合物及水溶性量子点的合成方法较为简便.     

相对论性核碰撞中Φ介子产生和弦碎裂函数

用强子和弦级联模型LUCIAE系统研究从AGS到SPS,到RHIC,再到LHC能量核–核碰撞中Φ介子产生.采用与能量有关弦碎裂函数,并通过与荷电粒子多重数实验数据的比较确定其中的参数后,LUCIAE模型给出的Φ介子产额与实验数据也都相近,得到的事件平均弦碎裂变量随能量之增趋饱和规律,可能是核穿透性能量行为的定性表示.