首页 | 本学科首页   官方微博 | 高级检索  
     检索      

多功能两亲梳状聚合物的合成及包覆荧光量子点
引用本文:吴战宇,撒宗朋,邱芳萍,赵义丽,李亚鹏,王书唯,王静媛.多功能两亲梳状聚合物的合成及包覆荧光量子点[J].高分子学报,2010,0(5):516-521.
作者姓名:吴战宇  撒宗朋  邱芳萍  赵义丽  李亚鹏  王书唯  王静媛
作者单位:1. 吉林大学化学学院,麦克德尔米得实验室,长春,130023
2. 长春工业大学化学与生命科学学院,长春,130012
3. 吉林大学化学学院,麦克德尔米得实验室长春,130023
基金项目:国家自然科学基金,吉林省科技厅青年基金 
摘    要:利用溶液聚合和成酰胺反应合成了多功能梳状两亲性共聚物,聚(甲基丙烯酸-co-甲基丙烯酸十八酯)-(乙醇胺-乙二胺叶酸)(PSM-EE-FA).用红外光谱(FTIR),核磁共振(1H-NMR)及凝胶渗透色谱(GPC)表征了该聚合物的结构及分子量分布.实验结果证明合成了该聚合物,其数均分子量(Mn)为28600,多分散性为1.375.用该两亲梳状聚合物包覆油溶性CdSe/ZnS量子点,通过相转移作用,得到水溶性靶向量子点(PSM-EE-FA-QDs).该水溶性量子点溶液具有较好的稳定性.通过紫外-可见(UV-Vis)及荧光发射光谱分析对该量子点的光学性质进行研究.结果表明,PSM-EE-FA-QDs的紫外-可见光谱及荧光发射光谱峰形与原量子点基本一致.由于量子点表面聚合物层的形成,峰位发生少量红移.该量子点水溶液的荧光强度是原量子点氯仿溶液的98%,荧光产率是原量子点氯仿溶液的95%.动态光散射(DLS)及透射电镜(TEM)测试结果表明水溶性量子点分布均匀.合成的水溶性量子点不但光学性能稳定,而且聚合物及水溶性量子点的合成方法较为简便.

关 键 词:多功能  梳状  两亲  量子点  水溶
收稿时间:2009-05-04

SYNTHESIS OF A MULTIFUNCTIONAL COMB-TYPE AMPHIPHILIC POLYMER AND ITS USE FOR ENCAPSULATING LUMINESCENT QUANTUM DOTS
WU Zhanyu,SA Zongpeng,QIU Fangping,ZHAO Yili,LI Yapeng,WANG Shuwei,WANG Jingyuan.SYNTHESIS OF A MULTIFUNCTIONAL COMB-TYPE AMPHIPHILIC POLYMER AND ITS USE FOR ENCAPSULATING LUMINESCENT QUANTUM DOTS[J].Acta Polymerica Sinica,2010,0(5):516-521.
Authors:WU Zhanyu  SA Zongpeng  QIU Fangping  ZHAO Yili  LI Yapeng  WANG Shuwei  WANG Jingyuan
Institution:Alan G.MacDiarmid Institute, College of Chemistry, Jilin University, Changchun130023; College of Chemistry and Life Science, Changchun University of Technology, Changchun130012
Abstract:Solution polymerization and amidation reaction were used to synthesize the multifunctional combtype amphiphilic polymer,poly(stearyl methacrylate-co-methylacrylic acid)-(ethanolamine-ethanediamine-folic acid) ( PSM-EE-FA ). A study on structure and configurations was conducted through Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (1H-NMR). The molecular weight distribution was determined by gel-permeation chromatograpy ( GPC ). It was found that the polymer was synthesized successfully,and that the number-average molar mass and the polydispersity index were 28600 and 1. 375 respectively. Through the phase transfer process,the amphiphilic polymer was used to encapsulate hydrophobic CdSe /ZnS core-shell quantum dots ( QDs) in chloroform to get water-soluble,targeting quantum dots ( PSM-EE-FA-QDs). The water-soluble QDs solution was stable. The optical properties of PSM-QDs were determined by ultraviolet-visible (UV-Vis) and fluorescence emission spectrum. As shown in the results,the UV-Vis and fluorescence emission peaks were similar to those of the original hydrophobic QDs. However,because of the formation of the polymer layer on the surface of the QDs,the red-shifts of the peaks were observed. The resulting PSM-EE-FA-QDs retained 98% of the photoluminescence value of the original CdSe /ZnS QDs in chloroform. The quantum yield (QY) of the PSM-EE-FA-QDs was 95% of the original QDs. With the dynamic light scattering (DLS) and transmission electron microscopy ( TEM) results,it was indicated that the water-soluble QDs were well-dispersed within the polymer. In addition to good performance of PSM-EE-FA-QDs,the synthesis of the copolymer and the corresponding water-soluble QDs is relatively simple.
Keywords:Multifunctional  Comb-type  Amphiphilic  QDs  Water-soluble
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《高分子学报》浏览原始摘要信息
点击此处可从《高分子学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号