Microwave promoted methylation of plant polysaccharides

O-Methylation is of outstanding importance in structural polysaccharide chemistry. A novel method for the methylation of polysaccharides using microwave (MW) irradiation is described. Seed gum from Cyamopsis tetragonolobus (Guar) was fully methylated with dimethyl sulphate and sodium hydroxide using 100% microwave power for 4 min in 68% yield. The completely methylated seed gum thus obtained was hydrolyzed by 70% formic acid followed by 0.5N H₂SO₄ under full microwave power for 1.16 and 1.66 min, respectively. The partially methylated monosaccharides were separated and identified.     

Transition metal(II) ions with dinegative tetradentate schiff base

Some new coordination polymers of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II), obtained from the interaction of metal acetate with dipotassium salt of N,N’-di(carboxyethylidene)terephthalaldehydediimine (K₂SB) are described. The products, which have been characterized by elemental analyses, magnetic measurements, thermogravimetric analyses, electronic and infrared spectral studies, have composition, [M(SB)(H₂O)₂]_n. These colored coordination polymers are non-hygroscopic and quite stable at room temperature. On the basis of analytical data and IR studies, a 1:1 metal to ligand stoichiometry has been suggested to these coordination polymers. The IR studies have also revealed that ligands are coordinated to metal ion through carboxy oxygen and azomethine nitrogen. All the studies suggested tetradentate nature of the ligand with octahedral symmetry of the coordination polymers. All the coordination polymers are insoluble in acetone, ethanol, chloroform, methanol, benzene, DMF and DMSO. The thermal decomposition of the coordination polymers is studied and indicates that not only the coordinated water is lost but also that the decomposition of the ligand from the coordination polymers is necessary to interpret the successive mass loss.     

Pervaporation from a dense membrane: roles of permeant-membrane interactions, Kelvin effect, and membrane swelling

Dense polymeric membranes with extremely small pores in the form of free volume are used widely in the pervaporative separation of liquid mixtures. The membrane permeation of a component followed by its vaporization on the opposite face is governed by the solubility and downstream pressure. We measured the evaporative flux of pure methanol and 2-propanol using dense membranes with different free volumes and different affinities (wettabilities and solubilities) for the permeant. Interestingly, the evaporative flux for different membranes vanished substantially (10-75%) below the equilibrium vapor pressure in the bulk. The discrepancy was larger for a smaller pore size and for more wettable membranes (higher positive spreading coefficients). This observation, which cannot be explained by the existing (mostly solution-diffusion type) models ofpervaporation, suggests an important role for the membrane-permeant interactions in nanopores that can lower the equilibrium vapor pressure. The pore sizes, as estimated from the positron annihilation, ranged from 0.2 to 0.6 nm for the dry membranes. Solubilities of methanol in different composite membranes were estimated from the Flory-Huggins theory. The interaction parameter was obtained from the surface properties measured by the contact angle goniometry in conjunction with the acid-base theory of polar surface interactions. For the membranes examined, the increase in the "wet" pore volume due to membrane swelling correlates almost linearly with the solubility of methanol in these membranes. Indeed, the observations are found to be consistent with the lowering of the equilibrium vapor pressure on the basis of the Kelvin equation. Thus, a higher solubility or selectivity of a membrane also implies stronger permeant-membrane interactions and a greater retention of the permeant by the membrane, thus decreasing its evaporative flux. This observation has important implications for the interpretation of existing experiments and in the separation of liquid mixtures by pervaporation.     

Development of xylose-fermenting yeasts for ethanol production at high acetic acid concentrations

Mutants resistant to comparatively high levels of acetic acid were isolated from the xylose-fermenting yeastsCandida shehatae andPichia stipitis by adapting these cultures to increasing concentrations of acetic acid grown in shake-flask cultures. These mutants were tested for their ability to ferment xylose in presence of high acetic acid concentrations, in acid hydrolysates of wood, and in hardwood spent sulfite liquor, and compared with their wild-type counterparts and between themselves. TheP. stipitis mutant exhibited faster fermentation times, better tolerance to acid hydrolysates, and tolerance to lower pH.     

Fibre-optic fluorosensor for sulphur dioxide

A fibre-optic sensor for continuous measurement of sulphur dioxide is described. It is based on the dynamic quenching of the fluorescence of a polynuclear aromatic hydrocarbon [benzo(b)fluoranthene] which is immobilized in silicone polymer. Sulphur dioxide is shown to be an efficient quencher; Stern-Volmer graphs are given which describe the relation between SO₂ concentration and relative fluorescence. Detection limits are about 0.01% (v/v) SO₂ in air; the useful range is from 0.01–6% (v/v). Other gases likely to occur in air were found to be inert, except for oxygen which also acts as a dynamic quencher. Its interference is negligible for SO₂ levels below 6% in air at constant oxygen pressure, because the quenching efficiency of SO₂ is about 26 times higher than that of oxygen. For varying oxygen levels, a two-sensor technique is suggested.     

Mechanism of iridium(III) catalysis in the oxidation of diols by N-bromoacetamide

Summary The kinetics of iridium(III)-catalysed oxidation of 1,2-ethanediol and 1,4-butanediol by N-bromoacetamide (NBA) in HClO₄ in the presence of [Hg(OAc)₂] as a scavenger for Br^– have been investigated. The reactions are zero-order with respect to both diols, and first-order in NBA at low NBA concentrations, tending to zero order at high concentrations. The order in Ir^III decreases from unity to zero at high iridium(III) concentrations. A positive effect on the oxidation rate is observed for [H⁺] and [Hg^II] whereas a negative effect is observed for acetamide and [Cl^–]. Ionic strength does not influence the oxidation rate. (H₂OBr)⁺ is postulated as the oxidizing species. A mechanism consistent with the observed kinetic data is proposed.     

Enzymatic fabrication of DNA nanostructures: extension of a self-assembled oligonucleotide monolayer on gold arrays

Nucleic acid nanostructures are useful as templates for bionanofabrication of composite molecular nanostructures in materials science, molecular electronics, and biosensing. Here, we demonstrate that terminal deoxynucleotidyl transferase, which repetitively adds mononucleotides to the 3' end of a short DNA initiator, can be used to rapidly fabricate DNA nanostructures up to 121 nm high with lateral dimensions from 0.1 to 4 mum in 2 h. These programmable scaffolds can potentially be employed to build more complex nanostructures consisting of natural or unnatural nucleotides with selective docking sites along the single-stranded DNA.     

Synthesis,characterisation and solid state thermal behaviour of nickel(II) diamine complexes

Summary [NiL₂X₂] (L =N,N-dimethyl-1,2-ethanediamine; X = Cl^–, CF₃CO ₂ ^– , CC1₃CO ₂ ^– and CBr₃CO ₂ ^– ), [NiL₂C₂O₄] · H₂O and [NiL₂X₂] · 2 H₂O (X = Br^–, 0.5 SO ₄ ^2– and 0.5 SeO ₄ ^– ) have been synthesised and their thermal studies carried out. Thermally induced phase transition phenomena are noticed in [NiL₂X₂] (X = CF₃CO ₂ ^– and CCl₃CO ₂ ^– ) and their probable mechanisms are described. [NiL₂X₂] (X = Br^–, 0.5 SO ₄ ^2– and 0.5 SeO ₄ ^2– ) and [NiLX₂] (X = Cl^–, 0.5 C₂O ₄ ^2– and 0.5 SO ₄ ^2– ) have been prepared by solid state pyrolysis from the respective parent diamine complexes. [NiL₂X₂] have been made in solid state by temperature arrest technique from [NiL₂(CX₃CO₂)₂] (X = Cl^– and Br^–).     

Adhesion and debonding of soft elastic films: crack patterns, metastable pathways, and forces

We study the phenomenon of debonding in a thin soft elastic film sandwiched between two rigid plates as one of the plates is brought into intimate contact and then pulled away from contact proximity by application of a normal force. Nonlinear simulations based on minimization of total energy (composed of stabilizing elastic strain energy and destabilizing adhesive interaction energy) are employed to address the problems of contact hysteresis, cavitation, crack morphology, variation of contact area, snap-off distance, pull-off force, work done, and energy loss. Below a critical distance (d(c)) upon approach, simulations show the formation of columnar structures and nonrandom, regularly arranged nanocavities at the soft interface at a length scale of approximately 3h (h being the thickness of the film). The persistence of such instability upon withdrawal (distance >d(c)) indicates a contact hysteresis, which is caused by an energy barrier that separates the metastable states of the patterned configuration and the global minimum state of the flat film. The energy and the pull-off force are found to be nonequilibrium and nonunique properties depending on the initial contact, defects, noise, etc. Three broad pathways of debonding leading to adhesive failure of the interface, depending on the stiffness of the film, step size of withdrawal, and the imposed noise, are identified: a catastrophic column collapse mode, a peeling mode involving a continuous decrease in the contact area, and a column splitting mode. The first two modes are caused by a very high stress concentration near the cavity edges. These metastable patterned configurations engender pull-off forces that are orders of magnitude smaller than that required to separate two flat surfaces from contact.     

Unusually efficient quenching of the fluoroscence of an energy transfer-based optical sensor for oxygen

A two-fluorophore system consisting of pyrene as donor and perylene as energy acceptor undergoes efficient energy transfer when pyrene is electronically excited. The excitation wavelength was that of pyrene and fluorescence was monitored at the emission wavelength of perylene. The fluorescence of pyrene is strongly quenched by oxygen, but that of perylene is not. The two-fluorophore system, in contrast, is very strongly quenched, with a 4-fold increase in the Stern-Volmer quenching constant as compared to the quenching of pyrene, as a result of the effect of oxygen on the formation of the donor-acceptor exciplex, and quenching by oxygen. The results are used to design a fluorescence-based optical oxygen sensor which offers a sensitivity greatly exceeding that of existing oxygen probes.