A tetra-coordinate nickel(II) complex as neutral carrier for nitrate-selective PVC membrane electrode

The potentiometric response properties and applications of a tetra-coordinate nickel(II) complex with relatively high selectivity toward nitrate ion are described. The nickel(II) complex of 5,7,12,14-tetramethyl-1,4,8,11-tetraazacyclotetradeca-4,6,11,13-tetraene was used as a neutral carrier into plasticized poly(vinyl chloride) (PVC) membrane. The influence of several variables was investigated in order to optimize the potentiometric response and selectivity of the electrode. The resulting membrane electrode incorporating 31.0% PVC, 61.0% dioctyl phthalate (DOP) as plasticizer, 3% methyltrioctylammonium chloride (MTOAC) as a cationic additive and 5% carrier (all w/w) demonstrates a Nernstian response slope of −59.6 mV per decade over the concentration range of 5×10⁻⁶-1×10⁻¹ M NO₃⁻. The electrode exhibits a fast response time (≤10 s), a detection limit of 2.5×10⁻⁶ M, and can be used over a wide pH range of 4-12. The electrode shows improved selectivity in comparison to most of the previously reported nitrate-selective electrodes. It was successfully applied to the determination of nitrate ion in natural water samples.     

Mn(Ⅱ)和Ce(Ⅳ)离子对铬酸氧化乳酸的影响

The kinetics and mechanism of lactic acid oxidation in the presence of Mn(II)and Ce(IV)ions by chromic acid were studied spectrophotometrically.The oxidation of lactic acid by Cr(VI)was found to proceed in two measurable steps,both of which gave pyruvic acid as the primary product in the absence of Mn(II).2Cr(VI) 2CH3CHOHCOOH→2CH3COCOOH Cr(V) Cr(III)Cr(V) CH3CHOHCOOH→Cr(III) CH3COCOOH The observed kinetics was explained due to the catalytic and inhibitory effects of Mn(II)and Ce(IV)on the lactic acid oxidation by Cr(VI).The reactivity of lactic acid depends upon the experimental conditions.It acts as a two-or three-equivalent reducing agent in the absence or presence of Mn(II).It was examined that Cr(III)products resulting from the direct reduction of Cr(VI)by three-equivalent reducing agents.The oxidation of lactic acid follows the complex order kinetics with respect to [lactic acid].The activation parameters Ea,ΔH#,and ΔS# were calculated and discussed.     

Effect of bovine serum albumin on the surface properties of ionic liquid-type Gemini surfactant

The effect of bovine serum albumin on the surface properties of IL-type gemini surfactant ([C₁₀-4-C₁₀im]Br₂), have been investigated by surface tension method. The critical micelle concentration (CMC) as a function of BSA concentrations at various temperatures was investigated. The CMC of [C₁₀-4-C₁₀im]Br₂ increases with increasing the concentration of BSA as well as the temperature of the system. The interfacial parameters viz; maximum surface excess concentration (Γ_max), the minimum area per molecule (A_min), and surface pressure at CMC (Π_cmc) were calculated. In addition, thermodynamic parameters of adsorption and micellization were evaluated by using surface tension data. The results indicated that the binding of [C₁₀-4-C₁₀im]Br₂ to BSA is spontaneous and exothermic in nature. The process is entropy driven and hydrophobic interactions are the major driving forces.     

Two and k-Photon Jaynes–Cummings Models and Dirac Oscillator Problem in Bargmann–Segal Representation

In this work, we show that the Bargmann–Segal representation is a very simple approach to obtain the energy eigenvalues of some two-level quantum systems. It is shown that for 2-photon and k-photon Jaynes–Cummings models, the Bargmann–Segal realization gives the same energy eigenvalue which obtained by Lie algebraic and the matrix methods. We also study the Dirac oscillator problem in this representation.     

Fabrication and characterization of highly crystalline mordenite membranes on α-alumina disks via a seeded in situ template-free hydrothermal treatment

A template-free seeded short-time in situ hydrothermal treatment was carried out in a brass autoclave to synthesize crystalline mordenite (MOR) membranes on alumina-silicate disk supports with micro-scale pores. According to XRD analysis, MOR was the only zeolitic material present in the membrane layers on the supports. SEM examination of the membranes showed three different layers of the membrane thickness: (i) support sub-layer, (ii) mix penetrated mid-layer, the MOR crystals filling the pores among the support (about 4–5 μm), and (iii) MOR top-layer (about 4–5 μm). The crystalline bonds between MOR crystals of the membrane top-layer and the crystals of the support were clearly observed within the mid-layer. The continuous top-layer of zeolitic membrane was formed by many large and well-shaped crystals. The seeding treatment significantly enhanced the formation of MOR crystals onto the surface of the supports. EDAX analysis showed a Si/Al ratio of 6.8 for the MOR layer of the membrane. Due to their hydrophilic natures, the polycrystalline MOR membranes were found to be selective for continuous dehydration of different EtOH–water mixtures through an adsorption–diffusion–desorption mechanism. Both total permeation flux and separation factor of the membrane were found to increase by increasing temperature and water concentration of feed. The continuity and high crystallinity of the membrane top-layer led to the fairly high dehydration of EtOH. It was found that there was no pinhole within the layer and the morphology of the membrane was almost defect-free.     

Transferred multipolar atom model for 10β,17β‐dihydroxy‐17α‐methylestr‐4‐en‐3‐one dihydrate obtained from the biotransformation of methyloestrenolone

Biotransformation is the structural modification of compounds using enzymes as the catalysts and it plays a key role in the synthesis of pharmaceutically important compounds. 10β,17β‐Dihydroxy‐17α‐methylestr‐4‐en‐3‐one dihydrate, C₁₉H₂₈O₃·2H₂O, was obtained from the fungal biotransformation of methyloestrenolone. The structure was refined using the classical independent atom model (IAM) and a transferred multipolar atom model using the ELMAM2 database. The results from the two refinements have been compared. The ELMAM2 refinement has been found to be superior in terms of the refinement statistics. It has been shown that certain electron‐density‐derived properties can be calculated on the basis of the transferred parameters for crystals which diffract to ordinary resolution.     

Three-Component,One-Pot Synthesis of New Functionalized Pyrrolines

The addition of acetylenic esters to diethyl acetamidomalonate in the presence of tert-butyl isocyanide leads to highly functionalized 1-pyrrolines and 2-pyrroline.     

Synthesis of Substituted Tricyclo[5.3.1.04,9]undecan‐2,6‐dione from 4,4‐Disubstituted Cyclohexanone Enamines and Methacryloyl Chloride

Morpholine enamines 4‐acetyl‐4‐methyl‐1‐morpholinocyclohexene 4a, 4‐acetyl‐4‐phenyl‐1‐morpholinocyclohexene 4b, and 4‐acetyl‐4‐isopropenyl‐1‐morpholinocyclohexene 4c react with methacryloyl chloride to give 1,7‐dimethyl‐4(N‐morpholino) tricyclo[5.3.1.0^4,9]undecan‐2,6‐dione 9a , 1‐phenyl‐7‐methyl‐4(N‐morpholino) tricyclo[5.3.1.0^4,9]undecan‐2,6‐dione 9b , and 1‐ispropenyl‐7‐methyl‐4(N‐morpholino) tricyclo[5.3.1.0^4,9]undecan‐2,6‐dione 9c respectively, along with the corresponding substituted adamandane‐2,4‐diones.     

Reactivity of Various α-Halo Ketones in One-Pot Synthesis of γ-Iminolactones

The highly reactive 1:1 intermediate generated in the reaction of tert-butyl isocyanide and dialkyl acetylenedicarboxylate is trapped by α-halo ketones to produce halogenated iminolactones as the sole product in good yields.