两台独立飞秒钛宝石振荡器的高精度主动同步研究

对两台独立钛宝石飞秒振荡器的高精度主动同步进行了研究.实验中共采用三套锁相环对它们输出的激光脉冲进行了主动同步控制，最终得到了时间抖动低于30fs的同步精度；由于通过计算机智能监控两台振荡器的相对腔长变动，使得高精度同步维持的时间高达40min.     

Preparation of graphene on SiC by laser-accelerated pulsed ion beams

Laser-accelerated ion beams (LIBs) have been increasingly applied in the field of material irradiation in recent years due to the unique properties of ultra-short beam duration, extremely high beam current, etc. Here we explore an application of using laser-accelerated ion beams to prepare graphene. The pulsed LIBs produced a great instantaneous beam current and thermal effect on the SiC samples with a shooting frequency of 1 Hz. In the experiment, we controlled the deposition dose by adjusting the number of shootings and the irradiating current by adjusting the distance between the sample and the ion source. During annealing at 1100 ℃, we found that the 190 shots ion beams allowed more carbon atoms to self-assemble into graphene than the 10 shots case. By comparing with the controlled experiment based on ion beams from a traditional ion accelerator, we found that the laser-accelerated ion beams could cause greater damage in a very short time. Significant thermal effect was induced when the irradiation distance was reduced to less than 1 cm, which could make partial SiC self-annealing to prepare graphene dots directly. The special effects of LIBs indicate their vital role to change the structure of the irradiation sample.     

Generation of a Sub-10fs Laser Pulse by a Ring Oscillator with a High Repetition Rate

A compact femtosecond Ti：sapphire ring oscillator composed of chirped mirrors is designed. By accurately optimizing the intra-cavity dispersion and the mode locking range of the ring configuration, we generate laser pulses as short as 7.7fs with a repetition rate as high as 745 MHz. The spectrum spans from 660nm to 94Ohm and the average output power is 480mW under the cw pump laser of 7.5 W.     

PPLN晶体差频测量飞秒激光脉冲的载波包络相移

在飞秒激光频率梳系统中，通常采用自参考技术测量飞秒激光脉冲的载波包络相移，但该技术需要采用光子晶体光纤进行光谱扩展从而增加了系统的不稳定性，这种技术已经制约了高稳定度的飞秒激光频率梳的发展.采用PPLN晶体差频法测量了宽谱钛宝石振荡器输出的7fs激光脉冲的载波包络频移，得到了大于30dB的拍频信号，为研制无光纤的新一代高稳定度光学频率梳奠定了基础.     

非真空传输的高效交叉偏振滤波设计与产生

采用常规透镜设计了适用于非真空环境中交叉偏振波(XPW)产生的双透镜聚焦系统,在相对较短的距离实现了长焦透镜聚焦的效果,并测量了聚焦后的激光脉冲,发现其没有显著的非线性相位积累,保证了激光光束质量.在非真空中采用双BaF_2晶体得到了XPW系统转换效率22%,光谱1.78倍展宽的净化脉冲输出,双透镜组合聚焦形式使得双BaF_2晶体间距在13—22 cm内可保证20%以上的XPW转换效率,双晶体间距的调节冗余度提高了两个量级,极大地降低了双晶转换效率对晶体间距的依赖.这种正负透镜组合聚焦的光路设计在非真空中实现了高效稳定的XPW输出,为后续的放大应用提供了高对比度、宽光谱的高质量种子源.     

Frequency stabilization of a 214.5-nm ultraviolet laser

An improved method for stabilizing a frequency-quadrupled 214.5-nm tunable diode laser system is reported. Improvements to the method include a homemade logic circuit and the use of a Fabry-Perot optical spectrum analyzer as a transfer cavity. Lasers locked with this method exhibit megahertz-level frequency stability measured with an optical frequency comb referenced to a cesium atomic standard. The laser can be locked for hours to days, depending on experiment requirements. Being relatively inexpensive, stable, and robust, the control method can be applied to stabilizing essentially all lasers of deep ultraviolet wavelengths.     

采用多通腔望远镜谐振腔结构的10MHz重复频率飞秒钛宝石激光器特性研究

通过在钛宝石激光腔内引入望远镜长腔系统增加腔长,实现了重复频率低到10?MHz的飞秒激光振荡,在5?W的抽运功率下获得了平均输出功率200?mW、单脉冲能量20?nJ的稳定输出. 在此基础上分析了腔内不同色散情况下的输出脉冲光谱和脉宽特性,结果表明在腔内存在一定负色散的情况下,锁模脉宽可接近转换极限,最短脉宽可达56?fs. 而在正色散的情况下,锁模输出的脉宽较宽,并且随着腔内正色散的增多,脉宽可到大于600?fs,锁模光谱也呈马鞍形. 关键词： 钛宝石激光器 飞秒脉冲 低重复频率 望远镜腔     

Generating Proton Beams Exceeding 10 MeV Using High Contrast 60TW Laser

A prototype of a laser driven proton accelerator is built at Peking University. Protons exceeding 10 MeV are accelerated from micrometer-thick aluminum targets irradiated by tightly focused laser pulse with 1.8 J energy and 30 fs duration. The beam energy spectrum and charge distribution are measured by a Thomson parabola spectrometer and radiochromic film stacks. The sensitivity of proton cut-off energy to the focusing of the laser beam, the pulse duration, and the foil thickness are systematically investigated in the experiments. Stable proton beams have been produced with an optimized parameter set, providing a cornerstone for the future applications of laser accelerated protons.     

激光尾波场驱动准连续小角度电子束研究进展

报道了在北京大学新建成的5 Hz 200 TW飞秒激光加速器实验装置上利用68 TW(1.7 J,25 fs)的激光与混合气体(99%He掺杂1%N_2)进行激光电子加速的初步实验结果与理论分析.在实验中观测到了最大截止能量为290 MeV的连续电子能谱,并且最大输出能量在一定的聚焦范围内基本不变.二维particle-in-cell模拟表明:电离注入导致电子不断注入,使得纵向相空间在激光传播几个毫米后基本被电子填满;之后相空间中电子分布基本保持稳定,随着激光传播距离的增加,输出电子最大能量几乎不变,这与实验观察到的最大输出能量随激光聚焦位置在一定范围内不变的现象一致.实验与模拟结果揭示了在当前实验条件下连续电离注入对电子束品质的影响,为今后进一步优化电离注入电子品质提供了依据.     

用SPIDER法测量超宽带钛宝石振荡器的激光脉宽研究

用SPIDER方法测量了超宽带钛宝石振荡器输出激光的脉宽，得到7.86 fs的测量结果，这是目前国内所报道的仅用啁啾镜补偿色散、直接从振荡器输出的最短激光脉冲.简要介绍了振荡器的基本结构和SPIDER方法测量装置，并对计算得到的光谱相位进行了讨论和分析.