EAST装置上W波段多道极向相关反射仪的研制

在EAST装置上安装了X模极化W波段多道相关反射仪，用于测量等离子体芯部密度涨落。该诊断利用低损耗(<3dB)多工器将4个不同频率(79.2GHz，85.2GHz，91.8GHz和96GHz)的微波耦合在一起，通过同一个天线发射。反射波由两个极向分离(~5cm)的天线接收，通过下变频技术实现外差测量。通过对两个极向天线接收的信号进行相关分析，获得芯部湍流垂直速度。对2018年低约束模式(L模)放电进行分析发现，在电子回旋共振加热(ECRH)等离子体中，芯部湍流垂直速度在电子逆磁漂移方向。而在注入同向中性束(co-NBI)后，芯部湍流垂直速度变为离子逆磁漂移方向。     

ns脉冲激光对K9玻璃的破坏实验

 采用高速PIN光电探测器和高带宽的数字存储示波器，实时检测透射光脉冲和散射光脉冲的变化特征，并将之用作材料破坏的光学判据，测量得到K9玻璃在1.06μm纳秒脉冲激光作用下的能量损伤阈值约18mJ，相应的能量密度阈值为1.0kJ/cm²。通过分析透射光脉冲和散射光脉冲的特征，给出了材料的破坏时刻，并推断出K9玻璃所能承受的极限光强为10¹⁵W/m²。研究了能量透过率与泵浦能量的关系，并初步探讨了透明材料的破坏机理。结果表明：在多纵模激光的作用下，透明光学材料破坏是电离击穿与自聚焦效应综合作用的结果。     

Fission Barrier for ^240Pu in the Quadrupole Constrained Relativistic Mean Field Approach

The fission barrier for ^240pu is investigated beyond the second saddle point in the potentiM energy surface by the constrained relativistic mean field method with the newly proposed parameter set PK1. The microscopic correction for the centre-of-mass motion is essentiM to provide the correct potential energy surface. The shell effects that stabilize the nuclei against the fission is also investigated by the Strutinsky method. The shapes for the ground state, fission isomer and saddle-points, etc, are studied in detail.     

Fabrication of Intrinsic Josephson Junctions on BI2Sr2CaCu2O8＋δ Single Crystals with Reproducible Surface Junctions

Intrinsic Josephson junctions on Bi2Sr2CaCu2O8 δ single crystals are successfully fabricated using photolithography and Ar jon milling .Here we discuss the properties of the surface CuO2/metal bilayers and surface junctions prepared with different crystal cleavage conditions and metal film deposition techniques.We show that,by cleaving the crystal at liquid nitrogen temperature in vacuum,the contents of the (interstitial) oxygen in the Bi-O layers become stable upon cleavage,leading to a CuO2/metal bilayer and to surface junctions with reproducible properites,These results can be useful for practical device fabrications as well as for the studies of the contact properties between high Tc superconductors and normal metals.     

加热炉热过程动态操作数学模型

根据加热炉生产特点,建立了钢坯加热过程的动态操作数学模型,分析了待轧时间变化时炉内钢坯温度分布情况。并针对加热炉待轧的灰色性,采用多目标灰色局势决策方法,得出了相应合理的待轧优化控制策略。模拟结果表明:该方法具有良好的动态性能,适合于在线控制。     

Spurious Shell Closures in the Relativistic Mean Field Model

Following a previous systematic theoretical study of the ground-state properties of over 7000 nuclei from the proton drip line to the neutron drip line in the relativistic mean field model [Prog. Theor. Phys. 113 （2005） 785], which is in fair agreement with existing experimental data, we observe a few spurious shell closures, i.e. proton shell closures at Z = 58 and Z = 92. These spurious shell closures are found to persist in all the effective forces of the relativistic mean field model, e.g. TMA, NL3, PKDD and DD-ME2.     

甲基丙烯酸全氟烷基代乙酯对天然橡胶乳液辐射改性研究

天然橡胶的性能与其组成中的C C双键有密切关系,由于C C双键的存在,为天然橡胶的改性提供了便利,大多数天然橡胶的改性方法,如氯化、氢氯化、环化、环氧化、接枝共聚等皆是建立在这一思路基础上的.White等[1]认为接枝天然橡胶的目的是提高天然橡胶的机械强度,赋予特殊的功能.作     

若干因素对催化光还原水产氢的量子收率的影响

研究了pH对Prof(前黄素)-MV~(2 )(甲基紫精)-EDTA(乙二胺四乙酸二钠)-K_2PtCl_4,Prof-Rh(bpy)_3~(3 )-TEOA(三乙醇胺)-K_2PtCl_4以及Ru(bpy)_3~(2 )-Rh(bpy)_3~(3 )-TEOA-K_2PtCl_4三个体系的产氢量子收率(ΦH_2)的影响。表明前一体系的最佳pH范围是4.0—5.0,后两个体系为7.5—8.1,还研究了光敏剂(PS)浓度对ΦH_2的影响,当PS浓度超过某一极限值时,ΦH_2随PS浓度增加而降低。在MV~(2 )-EDTA-K_2PtCl_4催化体系中,使用吸收光谱重叠的两种光敏剂(Prof和Ru(bPy)_3~(2 )一般导致ΦH_2的下降;但当其中一种PS的浓度超过极限值时,使用两种光敏剂所得的ΦH_2结果较单独使用其中任何一种要好。     

溶胶-凝胶法制备铁酸盐超微粒子催化剂

采用溶胶－凝胶法制备了含Zn,Ni,Co的铁酸盐超微粒子催化剂，运用DTA－TG、IR、XRD以及BET比表面测试等手段对所制备的样品进行了表征。同时，考察了铁酸盐对二氧化碳选择性氧化乙苯制苯乙烯的催化性能。结果表明：制备的铁酸盐均为尖晶石型晶体，粒子的比表面积为31．9－36．3m^2/g，晶粒大小约为30－35nm，在由二氧化碳选择性氧化乙苯制苯乙烯的反应中表现出较好的催化活性。     

氧化偶联聚合方法合成电活性聚芳醚酮

通过氧化偶联聚合方法成功地合成出电活性聚芳醚酮. 该反应条件温和, 操作简单, 室温下即可进行. 用红外光谱、核磁共振谱、高效凝胶渗透色谱、循环伏安、热失重、X射线衍射等技术对所合成的聚合物进行了表征, 并探讨了聚合物的性能.