石英基掺Yb3+光纤中Al3+共掺特性的研究

基于实验测试结果分析了用于大功率光纤激光器的石英基包层抽运掺Yb3+光纤中Al3+共掺的特性.揭示出在高掺Yb3+的石英基光纤中,共掺Al3+的摩尔浓度为Yb3+摩尔浓度的9-11倍时既可以减小Yb3+的浓度猝灭概率,又可以获得高吸收系数,同时还可更好地满足数值孔径的要求的结论.在此基础上利用MCVD设备并结合湿法掺杂工艺制作出多根石英基掺Yb3+光纤预制棒,对拉丝后光纤的相关参数测试表明,通过精确控制疏松层的沉积温度,掺Yb3+光纤在976 nm波长的吸收系数可高达620 dB/m,且重复性好.这一结论为共掺Al3+的掺Yb3+光纤制作提供了良好的借鉴作用.     

基于偏振保持掺Er3+光纤的高稳定性单波长光纤激光器

研制出光敏偏振保持掺Er³⁺光纤,通过在这种光纤上紫外写入三个光纤光栅,形成对抽运激光高转化效率的谐振腔.在输出功率为23.617dBm、工作波长为976nm的激光抽运下,得到均值功率为9.20dBm、均值中心波长为1554.554nm的单波长激光输出.在室温下800min（约13.3h）的测量时间内,其输出功率的波动为±0.05dB,中心工作波长的波动为±0.0015nm. 关键词： 光纤激光器 3+光纤')" href="#">偏振保持掺Er³⁺光纤 光纤Bragg光栅     

Stable Dual-Wavelength Fibre Laser with Bragg Gratings Fabricated in a Polarization-Maintaining Erbium-Doped Fibre

A new polarization-independent duai-wavelength fibre laser by fabricating a uniform FBG and a chirped FBG in a polarization-maintaining erbium-doped fibre （PM-EDF） is proposed and demonstrated. The wavelength spacing is 0.18nm and the optical signal-to-noise ratio is greater than 50dB with pump power of 246mW. Chirped FBG is used to make the reflectivity wavelengths of two PM-FBGs match easier. Since both EDF and FBGs are polarization-maintaining without splices and the two wavelengths are polarization-independent, the maximum amplitude variation and wavelength shifts for both lasing wavelength with 3-min intervals over a period of six hours are less than 0.2 dB and 0.005 nm, respectively, which shows stable dual-wavelength output.     

Design and Fabrication of an Er-Doped Silica Optical Fiber with Six Photosensitive Subcores

A type of multi-core Er-doped photosensitive silica optical fiber （MC-EDPF） is proposed and fabricated, in which a high consistency Er-doped core is surrounded by six high consistency Ge-doped cores. The multi-core design can overcome the difficulties encountered in the design and fabrication of single-core EDPFs through a modified chemical vapor deposition method combined with solution doping technology, and there is a conflict between high consistency Er doping and high consistency Ce doping. The absorption of MC-EDPFs achieved 15.876dB/m at 1550mm and lOdB/m at 98Ohm. The refleetivity of the fiber Bragg gratings （FBCs） written directly on the MC-EDPFs is as much as 96.84%.     

石英基掺Yb3+光纤中Al3+共掺特性的研究

基于实验测试结果分析了用于大功率光纤激光器的石英基包层抽运掺Yb³⁺光纤中Al³⁺共掺的特性.揭示出在高掺Yb³⁺的石英基光纤中,共掺Al³⁺的摩尔浓度为Yb³⁺摩尔浓度的9—11倍时既可以减小Yb³⁺的浓度猝灭概率,又可以获得高吸收系数,同时还可更好地满足数值孔径的要求的结论.在此基础上利用MCVD设备并结合湿法掺杂工艺制作出多根石英基掺Yb³⁺光纤预制棒,对拉丝后光纤的相关参数测试表明,通过精确控制疏松层的沉积温度,掺Yb³⁺光纤在976 nm波长的吸收系数可高达620 dB/m,且重复性好.这一结论为共掺Al³⁺的掺Yb³⁺光纤制作提供了良好的借鉴作用. 关键词： 3+光纤')" href="#">石英基掺Yb³⁺光纤 3+共掺')" href="#">Al³⁺共掺 吸收系数 浓度猝灭     

石英基掺Tm3+包层抽运光纤激光器

在MCVD车床上利用“湿法”掺杂方法研制出纤芯高掺Ge的石英基掺Tm³⁺光纤预制棒,采用侧面研磨和抛光工艺制成横截面为正六边形的光纤预制棒.经拉丝,内层涂覆低折射率材料后制成包层抽运光纤.测试其吸收谱,并对光纤参数进行优化.通过在光纤两端紫外写入光纤Bragg光栅,制成线形光学谐振腔,在工作波长793nm的激光抽运下,获得工作波长1947.1031nm、功率2.05W的激光输出.由此证明这种光纤具有优异的光学特性. 关键词： 3+光纤')" href="#">石英基掺Tm³⁺光纤 光纤Bragg光栅 包层抽运 光纤激光器