Analysis of the impacts of mechanical errors on the RF performance of a single spoke cavity

Mechanical errors can not be avoided in fabrication. They will cause geometry errors and have impacts on the cavity performance. This paper systematically analyzes the impacts of mechanical errors on the RF performance of Peking University single spoke cavity. The various kinds of shape and size errors are considered, the influences on the resonation frequency and field flatness are studied by numerical simulation and the theoretical models are analyzed. The results show that the single spoke cavity is robust with respect to the mechanical tolerance. It also indicates the most essential factors for fabrication.     

The First Nine-Cell TESLA Cavity Made in China

A totally home-made 9-cell TESLA type superconducting cavity is mane at Peking University. The cavity abrication is according to DESY specification. The cavity is made of high purity niobium from OTIC, Ningxia. The electron beam welding is carried out at Harbin Institute of Technology, Harbin. By the cooperation, the cavity is tested at Thomas Jefferson National Accelerator Facility, USA. The preliminary result shows the acceleration gradient Eacc is 23 MV/m without quench and has potential for improvement.     

Geometry dependent multipacting of a superconducting quarter-wave resonator at PKU

A superconducting quarter-wave resonator (QWR) of frequency=162.5 MHz and β=0.085 (β =v/c) has been designed at Peking University. The multipacting (MP) simulation and analysis for the QWR with CST Particle Studio has been performed. The simulation results reveal that there is no sign of MP with its normal operating accelerating gradients in the range of 6-8 MV/m. The accelerating gradient range that may incur MP is from about 1.4 to 3.2 MV/m, and the places where MP may be encountered are mainly located at the top part of the QWR. So the effect of different top geometries on MP has also been studied in depth. Our results show that an inward convex round roof is better than other round roofs, and plane roofs have an advantage over round roofs on the suppression of MP in general. While considering the optimization of its electromagnetic (EM) design, our initial designed model is also acceptable.     

A preliminary study of the feasibility of using superconducting quarter-wave resonators foraccelerating high intensity proton beams

The superconducting (SC) cavities currently used for the acceleration of protons at a low velocity range are based on half-wave resonators. Due to the rising demand on high current, the issue of beam loading and space-charge problems has arisen. Qualities of low cost and high accelerating efficiency are required for SC cavities, which are properly fitted by using SC quarter-wave resonators (QWR). We propose a concept of using QWRs with frequency 162.5 MHz to accelerate high current proton beams. The main factor limiting SC QWRs being applied to high current proton beams is vertical beam steering, which is dominantly caused by the magnetic field on axis. In this paper, we intend to analyze steering and eliminate it to verify the qualification of using QWRs to accelerate high intensity proton beams.     

Electromagnetic design and optimization of a superconducting quarter wave resonator

Superconducting (SC) cavities currently used for the acceleration of protons at a low velocity range are based on half wave resonators. Due to the rising demand on high current, the issue of beam loading and space charge problems has arisen. Qualities of low cost and high accelerating efficiency are required for SC cavities, which are properly fitted by using an SC quarter wave resonator (QWR). We propose a concept of using QWRs with frequency 162.5 MHz to accelerate high current proton beams. The electromagnetic design and optimization of the prototype have been finished at Peking University. An analytical model derived by the transmission line theory is used to predict an optimal combination of the geometrical parameters, with which the calculation by Microwave Studio shows a good agreement. The thermal analysis to identify the temperature rise of the demountable bottom plate under various levels of thermal contact also has been done, and the maximum increment is less than 0.5 K even though the contact state is poor.     

Design of a 450 MHz β=0.2 single spoke cavity at PKU

The design of a 450 MHz β=0.2 superconducting single spoke cavity has been finished at Peking University. A theoretical model and a numerical simulation are used to study the relationship between the RF performance and the geometric parameters of the cavity. In this paper, the optimization of the spoke cavity is described in detail. The RF simulation gives the optimum parameters Epk/Zacc of 2.65 and Bpk/Eacc of 5.22 mT/（MV/m）. The mechanical properties of the cavity are also studied. Two stiff ribs are used to offer a credible mechanical stability.