Iron speciation by solid phase extraction and flame atomic absorption spectrometry using N,N′-bis-(2-hydroxy-5-bromobenzyl)-2-hydroxy-1,3-diiminopropane

A new Schiff base, N,N′-bis-(2-hydroxy-5-bromobenzyl)-2-hydroxy-1,3-diiminopropane, has been synthesized for the very sensitive determination of iron(III) and iron(II) in natural water samples. It enabled a very selective and rapid method for iron determination to be developed. The method has also been applied to total iron determination in sediment samples. In the preconcentration system, the Schiff base reagent is mixed with the samples and chelates containing iron(III). The complexes are then adsorbed on silica gel within a column system. Elution of the adsorbed chelate from the silica gel was performed with a small volume of acetone containing 2.5% nitric acid. The iron is measured off-line by flame atomic absorption spectrometry. The method can be applied to the preconcentration, separation and speciation of iron. The effects of parameters such as pH, sample flow rate, eluent flow rate, foreign ions and ligand concentration have been investigated. The effect of humic acid that can produce complexes with metal ions in natural systems has also been investigated. The results obtained indicate that the method is not affected by the presence of up to 10 ppm humic acid, which would be a very high concentration to be present in natural systems. The solid phase extraction method developed has been applied to the determination of iron in both natural water samples and sediment samples. The LOD was found to be 0.17 mg L⁻¹ when no preconcentration was used, although preconcentration factors of 100 could be achieved. The recovery values for spiked samples were between 100 and 104%. The results were compared statistically with those from the standard 1,10 phenanthroline method used for iron speciation in water systems. A Student’s t-test indicated no significant difference between the two methods. In addition, this method was applied to the analysis of a certified sediment sample, LGC 6156. Generally, a 10-fold preconcentration factor was required for the analysis of natural water samples.     

Reduction of nitriles into aldehydes using a TMDS/V(O)(OiPr)3 reducing system

A simple and convenient method for the chemoselective reduction of nitriles into aldehydes using a 1,1,3,3-tetramethyldisiloxane (TMDS)/triisopropoxyvanadium(V) oxide reducing system is described. Aromatic as well as aliphatic nitriles are reduced into the corresponding aldehydes in moderate to good yields.     

Synthesis of novel tetra-substituted benzimidazole compounds containing certain heterostructures with antioxidant and anti-urease activities

A new series of 5,6-dimethyl-2-phenyl-1H-benzimidazole derivatives was synthesized. The antioxidant activities of the synthesized compounds were determined according to the cupric reducing antioxidant capacity (CUPRAC), ABTS, and DPPH assays. Many of the target compounds showed good antioxidant activity. Among these compounds, it has been determined that the carbothioamide and 1,2,4-triazole derivatives had a very good antioxidant capacity. Also, all compounds were screened for in vitro inhibitory activity against Jack bean urease. Among the synthesized molecules, the starting compound, acetate, and acetohydrazide derivatives (with IC₅₀ values 12.02, 11.40, and 8.04 μg/mL, respectively) had a higher inhibitory effect on urease and exhibited a lower IC₅₀ values than acetohydroxamic acid (IC₅₀: 20.50 μg/mL) and thiourea (IC₅₀: 14.04 μg/mL) as a reference inhibitors.     

A novel approach for strong S-Box generation algorithm design based on chaotic scaled Zhongtang system

Nonlinear Dynamics - Substitution Box (S-Box) is one of the most significant structures used to create an encryption which is strong and resistant against attacks in block encryption algorithms....     

Iron-catalyzed selective reduction of nitro compounds to amines

An efficient reduction of the nitro group with a catalytic amount of Fe(acac)₃ and TMDS in THF at 60 °C affording the corresponding amine is described.     

An extensive FPGA-based realization study about the Izhikevich neurons and their bio-inspired applications

This study is aimed at analysing damping and gyroscopic effects on the stability of parametrically excited continuous rotor systems, taking into account both external (non-rotating) and internal (rotating) damping distributions. As case-study giving rise to a set of coupled differential Mathieu–Hill equations with both damping and gyroscopic terms, a balanced shaft is considered, modelled as a spinning Timoshenko beam loaded by oscillating axial end thrust and twisting moment, with the possibility of carrying additional inertial elements like discs or flywheels. After discretization of the equations of motion into a set of coupled ordinary differential Mathieu–Hill equations, stability is studied via eigenproblem formulation, obtained by applying the harmonic balance method. The occurrence of simple and combination parametric resonances is analysed introducing the notion of characteristic circle on the complex plane and deriving analytical expressions for critical solutions, including combination parametric resonances, valid for a large class of rotors. A numerical algorithm is then developed for computing global stability thresholds in the presence of both damping and gyroscopic terms, also valid when closed-form expressions of critical solutions do not exist. The influence on stability of damping distributions and gyroscopic actions is then analysed with respect to frequency and amplitude of the external loads on stability charts in the form of Ince–Strutt diagrams.

     

Calculation of multicentre nuclear attraction integrals over Slater-type orbitals using unsymmetrical one-range addition theorems

Using the unsymmetrical one-range addition theorems introduced by one of the authors with the help of complete orthonormal sets of Ψα-exponential type orbitals(α = 1,0,1,2,...),this paper presents the sets of series expansion relations for multicentre nuclear attraction integrals over Slater-type orbitals arising in Hartree-Fock-Roothaan equations for molecules.The final results are expressed through multicentre charge density expansion coefficients and basic integrals.The convergence of the series is tested by calculating concrete cases for arbitrary values of parameters of orbitals.     

An effective method for the reduction of the device utilization amount in experimental realization of a fractional-order system

This study focuses on the experimental realization of the fractional-order FitzHugh–Nagumo (FHN) neuron model. Firstly, a second-order approximation function is included to the FHN neuron model to satisfy the fractional-order definition. Since these approximation functions can meet the response of the ideal system only in a limited frequency band, the identification of their center frequency is very critical. Thus, the center frequency ‘ω_c’ of this second-order approximation functions is swept until getting the spiking responses of this neuron model for the first time in this study. After the center frequency is determined, this approximation function is transferred into the ‘z’ domain by employing the Tustin discretization operator. This achieved discrete defined and fractional-order FHN neuron model becomes suitable for implementation on the digital platforms. To verify the proficiency of the proposed sweeping process experimentally, the fractional-order FHN model in ‘z’ domain is implemented on the FPGA platform. After these applications, the order of the approximation function is reduced to one. Once this followed frequency sweeping process is repeated for the first-order approximation, the fractional-order FHN neuron model, which is built by this least-order approximation function, is also implemented with the FPGA. Therefore, the reductions of the device utilization amounts by using this least-order approximation function and the importance of the specific frequency identification process are seen clearly.

     

Transient thermal response of phase change material embedded with graphene nanoplatelets in an energy storage unit

This research was focused on the preparation of mixed metal oxide pigments doped with terbium ions with the general formula of Sn_0.752Co_0.08P_0.16Tb_0.008O₂. These pigments were synthesised by solid-state reactions at high calcination temperatures. The temperature range was chosen from 1350 to 1500 °C. The goal was to develop conditions for the synthesis of this type of pigments and to determine the influence of terbium ions on the colour properties of these compounds. All prepared pigments were applied into the organic matrix and into the ceramic glaze. Thermal behaviours of the reaction mixtures were investigated using differential thermal and thermogravimetric analysis. Synthesised Sn_0.752Co_0.08P_0.16Tb_0.008O₂ pigments were compared with concurrently prepared pigment Sn_0.760Co_0.08P_0.16O₂ depending on the calcination temperature with respect to the colour properties in CIE L*a*b* colour space, furthermore from the point of particle size distribution and phase composition. All compounds provided blue–violet hues that are stable in ceramic glazes.