Constructive and Destructive Two-Pulse Excitation Investigated with a White-Light Michelson Interferometer

Linear propagation of two pulses through methanol solution of aluminum phthalocyanine chloride is investigated using a modified white-light Michelson interferometer. The observed coherence time of the white light is 6 fs, and the separation between the two-excitation pulses is set to about 10 fs. The excitation is dependent on the phase-relation between the two pulses. We have observed an enhancement of the excitation when the two pulses are in-phase and strong suppression of the excitation when the two pulses are out of phase by π.     

Sol-Gel Processing of PbZrO3 Thin Films

PbZrO₃ (PZ) thin films have been prepared by 2-methoxyethanol route from lead oxide or lead acetate and zirconium n-butoxide. The use of lead oxide as lead source and the seeding layer of TiO₂ on Pt/TiO₂/SiO₂/Si substrate facilitate the formation of the perovskite phase.     

A Study of Amorphous Precursors for PbZrO3-PbTiO3 Based Ceramic Materials

Amorphous precursors for PbZrO₃ and PbTiO₃ ceramics were prepared from lead acetate and the transition metaln-propoxide inn-propanol orn-butoxide inn-butanol and hydrolysed with an excess of water. According to GLC and TGA/EGA analyses, the type of alkoxide group influences distinctly the structure of heterometallic precursors, i.e., oxo or acetate bridging, and the amounts of hydroxyl and organic groups bound to the metal network. The local environments of metal atoms in the amorphous precursors were also studied by EXAFS. The analysis reveals that in Pb−Zr precursors alkoxide groups modify the coordination spheres of the zirconium atoms. Conversely, local environments of both lead and titanium atoms within the analysed range of 3.4 A depend weakly on the type of alkoxide used.     

Detecting proximities between quadrupolar nuclei by double-quantum NMR

A robust, easy to optimize, and efficient homonuclear correlation NMR experiment for half-integer quadrupolar nuclei in solids is described and has been experimentally tested on anhydrous Na2HPO4-(23Na, S= 3/2 nucleus) and as-synthesized AlPO4-14 (27Al, S= 5/2 nucleus), an aluminophosphate molecular sieve.     

Simultaneous determination of DTPA,EDTA, and NTA by capillary electrophoresis after complexation with copper

We present a method for simultaneous determination of the aminopolycarboxylic acids DTPA, EDTA and NTA in dishwashing detergents, paper mill waters, and natural waters by capillary electrophoresis (CE). The complexing agents were examined as their copper(II) complexes and separated by conventional CE with reversed polarity of the applied voltage. The optimum separation conditions were established by varying the pH and phosphate and tetradecyltrimethylammonium bromide (TTAB) concentrations in the run buffer. The separations were carried out in a fused-silica capillary (61 cm×75 m i.d.) filled with phosphate buffer (80 mmol L^–1, TTAB concentration 0.5 mmol L^–1, pH 7.1, voltage –20 kV) using direct UV detection at 191 and 254 nm. With this CE method all the peaks in the electropherograms were properly separated, the calibration plots gave good correlation coefficients and all three complexing agents could be detected in less than 4 min. Linear calibration plots were obtained for CuDTPA, CuEDTA and CuNTA; limits of detection were 0.03 mmol L^–1 for all complexing agents and recoveries for all tested samples were within the range 104±7%. Results obtained from dishwashing detergent samples were found to be reliable and comparable with those from HPLC (R²=0.989) and UV–Vis (R²=0.985) methods.     

Electron microscope study of alkoxide-derived compositions within the PbZrO3-PbTiO3 phase diagram

Pb(Zr_0.50Ti_0.50)O₃ solid solution was prepared using lead acetate and transition metal n-propoxides in n-propanol or n-butoxides in n-butanol. The complex solutions were hydrolysed with an excess of H₂O. The resultant powders were calcined up to 700°C for 30 minutes in a flowing oxygen atmosphere. Scanning electron microscope analysis showed different morphologies of the resultant powders. The n-propoxide derived powder consisted of gel fragments, while the n-butoxide derived one had agglomerated submicrometre particles. EDS analysis of the powders revealed no chemical heterogeneities in the examined samples upon calcining up to 600°C, notwithstanding the type of precursor used. Both samples, calcined at 700°C, exhibited a slight deficiency of lead in the pyrochlore type phase as compared to the perovskite phase.     

Addition of benzylic and allylic organozinc and Grignard reagents to resin-bound imines to provide alpha-branched secondary amines bearing a wide variety of functional groups. Utility in the synthesis of beta-3 adrenergic receptor agonists

Benzylic and allylic organozinc and Grignard reagents have been added to resin-bound imines to provide alpha-branched secondary amines. Many functional groups, including electrophilic groups, were compatible with this methodology. Three modules--a resin-bound primary amine, an aromatic aldehyde, and the organometallic--were independently varied to produce a combinatorial library of alpha-branched secondary amines designed as beta-3 adrenergic receptor agonists.