Zein film as a novel natural biopolymer membrane in electrochemical detections

Permselective modifier films are very important in preparing highly sensitive electrochemical sensors. In this work, for the first time, the behavior of gold and glassy carbon electrodes coated with biocompatible zein film as a permselective membrane for the electrochemical detection of various compounds has been investigated. For this purpose, several electroactive cationic (methylene blue, brilliant green, and thionine) and anionic (potassium ferricyanide, alizarin red S, and riboflavin-5’-phosphate) compounds have been used as model. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) showed that zein membranes prepared from casting solution containing 1% zein in ethanol/water have porous structures with high nanometric roughness. The capacitance values of electrical double layers of electrodes modified with zein film were very high for hydrophilic ions in comparison with hydrophobic ions. Point of zero charge pH (pH_pzc) of zein membrane was 4.8. The results of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) as well as pH_pzc study indicated that zein permselective membrane acts as ion exchanger film for selected cationic compounds with fast electrochemical kinetics responses in aqueous solution (pH=7). This behavior was confirmed by circulating solutions containing model compounds from homemade continuous cell equipped with polyamide membranes modified with zein film.

Graphical Abstract

     

Radiochemical separation of <Superscript>67</Superscript>Ga from Zn and Cu using the adsorbent resin Amberlite XAD-7

Summary A column chromatography was developed using a nonionic, polar adsorbent resin Amberlite XAD-7 for routine radiochemical separation of ⁶⁷Ga from Zn and Cu. 7M HCl was found to be the optimum concentration for adsorption of ⁶⁷Ga and elution of both Zn and Cu. Distilled water was used for elution of ⁶⁷Ga from the column. The optimum flow rate of the solutions on to the column was 5 ml/min. The concentrations of Zn and Cu in the final product (30 ml), measured by a polarography method, were 2.0 and 0.5 ppm, respectively. A solvent extraction method, using diisopropyl ether/7M HCl system was also tested to perform the same separation and a comparison between the two methods was made. The radiochemical chromatographic separation system is simple in design and easy to operate for separations in a hot cell.     

Preparation and characterization of Cu (II) supported on poly(8‐hydroxyquinoline‐p‐styrene sulphonate) and its application as catalyst for the synthesis of hexahydroquinolines

Cu ( II ) supported on poly(8‐hydroxyquinoline‐p‐styrenesulfonate) (Cu ( II )@PHQSS) was prepared and fully characterized by the different techniques including fourier transform infrared spectroscopy (FT‐IR), ¹H NMR, ¹³C NMR, thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), differential thermal analysis (DTA), scanning electron microscope (SEM) and energy dispersive X‐ray analysis (EDS). Afterward, the Cu ( II )@PHQSS as nanostructured catalyst was used as catalyst for the synthesis of hexahydroquinolines.     

Experimental and numerical study of residual stresses caused by cold expansion of adjacent holes

Cold expansion is a useful process for imposing compressive residual stresses around the holes in riveted and bolted connections. These stresses increase the fatigue life of holed parts. Distribution and amount of exerted residual stress dependent on various parameters as material, distance of adjacent holes, hole diameter, cold expansion ratio and plate thickness. In this study, experimental and numerical results for two different aluminum alloys and various holes distances are investigated and compared. Effects of mentioned parameters on the residual stress are studied.     

Promising new catalytic properties of a Co (II)-carboxamide complex and its derived Co3O4 nanoparticles for the Mizoroki-Heck and the Epoxidation reactions

The new Co(II) - carboxamide complex ( 1 ) and Co₃O₄ nanoparticles ( 2 ), by way of thermal decomposition of ( 1 ) have been efficiently synthesised in the environment-friendly. X-ray diffraction reveals a slightly distorted octahedral coordination of cobalt (four nitrogens and two oxygens) in ( 1 ) and regular octahedral or tetrahedral ones (oxygens only) in ( 2 ). The investigation of ( 1 ) and ( 2 ) in the Mizoroki-Heck and epoxidation of alkens reactions showed them both to be powerful, green and inexpensive catalysts.     

A Highly Accurate Refractive Index Sensor with Two Operation Modes Based on Photonic Crystal Ring Resonator

A 2D hole‐type hexagonal lattice photonic crystal is utilized, herein, to detect the refractive index change of the material infiltrated into the designed circular sensing area which also resembles a ring resonator. The accuracy of the detection process is enhanced considering the simultaneous shift of the resonance wavelengths and the intensity modulation which occur in two separate spectral regions. The presented structure has the ability to detect liquids, material concentrations in fluids and gases having refractive indices in the range of n = 1–2 with sensitivity and quality factor of 61 nm/RIU and 3000, respectively, for resonance‐wavelength‐shift‐based operation. The detection range of n = 1–1.4 with the sensitivity of S = 0.69 NI/RIU is achieved for the intensity‐based measurement and the results show good linearity in the operating range.     

Detectability conditions for output-only subspace identification

ABSTRACT

The scope of output-only/blind identification is restricted to stochastic/statistical processes, but for the first time in this study, the detectability conditions for general output-only subspace identification are investigated. This aids the range of input sources to be extended in a much realistic manner, beyond the only stochastic inputs. For this purpose, the subspace framework is assigned to make a connection between the output signal contents and the LTI system order. A few substantial hypotheses and algebraic statements are propounded affirming the sufficiency of the genuine output sequences for the identification purpose. This can be perceived as the cornerstone of state-space model reconstruction. In order to consolidate the notions according to reality, several examples are studied and examined for different input classes with stochastic disturbance.     

Novel marine-based gold nanocatalyst in solvent-free synthesis of polyhydroquinoline derivatives: Green and sustainable protocol

We report an ecofriendly synthetic approach for the fabrication of biogenic gold nanoparticles (AuNPs) using electron-rich sea cucumber extract as a bio-reductant and stabilizing agent in reducing gold cations into AuNPs at the optimal conditions. The produced AuNPs are spherical in shape with an average particle size of 11 ± 1.5 nm in transmission electron microscopy (TEM) and exhibited a crystal structure of face-centered cubic in X-ray diffraction (XRD) analyses. Our results indicated that bioinspired AuNPs demonstrate superior catalytic activity in the safe and facile one-pot synthesis of polyhydroquinoline derivatives under solvent-free reaction conditions. This green route encompasses multiple benefits including highly recyclable bioinspired catalyst (5 cycles), short reaction times, convenient workout, high to excellent product yields (82%–97%), and nonhazardous conditions.     

Silica Sulfuric Acid: A Versatile and Reusable Catalyst for Synthesis of Coumarin-3-carboxylic Acids in a Solventless System

Synthesis of substituted coumarin-3-carboxylic acid via Knoevenagel condensation of meldrum's acid with ortho-hydroxyaryl aldehydes in solventless system is described.