The Determination of Protonation Constants of Some Amino Acids and Their Esters by Potentiometry in Different Media

In this study, stoichiometric protonation constants of L-tyrosine, L-cysteine, L-tryptophane, L-lysine, and L-histidine, and their methyl and ethyl esters in water and ethanol–water mixtures of 30, 50, and 70% ethanol (v/v), were determined potentiometrically using a combined pH electrode system calibrated as the concentration of hydrogen ion. Titrations were performed at 25^∘C and the ionic strength of the medium was maintained at 0.10 mol⋅L⁻¹ using sodium chloride. Protonation constants were calculated by using the BEST computer program. The effect of solvent composition on the protonation constants is discussed. The log₁₀ K₂ values of esters generally decreased with increasing ethanol content. However, the log₁₀ K₁ values of the esters of L-tyrosine, L-cysteine, and L-tryptophane were found to increase with increasing ethanol content in contrast those of L-lysine and L-histidine esters.     

14 MeV neutron activation analysis of gold jewellery

Samples of nominal 18 carat and 21 carat gold jewelleries from the local market were non-destructively bulk analyzed using neutron activation analysis. Neutrons of 14 MeV energy were used with a fast pneumatic sample transfer system. The actual gold contents, as well as the composition of the base metals in these samples were determined. The fast neutron activation was found to be an efficient, quick and accurate method of characterizing the precious metal objects routinely in bulk, with a large sample throughput. The results demonstrate the commercial availability of the technique for non-destructive bulk analysis of precious metal objects.     

Metal-Containing Phthalocyanines Substituted with One Branched Bulky Moiety and Six Alkylthio Groups

Summary.  Unsymmetrically substituted metal-phthalocyanines composed of three hexylthio groups and one 1-chloro-3,4-dicyano-6-[2-(2-pyridylmethylamino)phenylthio]benzene moiety was prepared by cyclization of the reactants in the presence of the anhydrous metal salts Zn(CH₃COO)₂, NiCl₂, and CoCl₂. The new unsymmetric phthalocyanines are very soluble in common organic solvents. The compounds were characterised by their elemental analyses, IR, ¹H NMR, MS and UV/Vis spectra. Corresponding author. E-mail: bayir@itu.edu.tr Received November 27, 2002; accepted (revised) December 2, 2002 Published online May 2, 2003     

Efficiency calibration of HPGe detector in far and close geometries

The absolute total and full-energy peak (FEP) efficiencies of a high purity germanium (HPGe) photon detector are measured in the energy range from 40 keV to 1500 keV. The functional parameters are fitted to the calibration points from 14 long-lived standard sources (¹²⁹I,²⁴¹Am,¹⁰⁹Cd,⁵⁷Co,¹³⁹Ce,¹³⁷Cs,⁵⁴Mn,⁶⁵Zn,⁶⁰Co,²²Na,¹³³Ba,¹⁵²Eu,¹⁵⁴Eu and^166mHo) within an accuracy better than the quoted uncertainty of the calibration sources. The efficiencies in far and close geometries are compared.     

Synthesis of novel unsymmetrical phthalocyanines substituted with crown ether and nitro groups

This work reports on the synthesis of new unsymmetrically substituted phthalocyanines (M = Zn, Cu, Co, Ni) bearing three benzo-15-crown-5 units through oxy bridges and a nitro group. Phthalocyanines were prepared by a statistical condensation of 4-nitro phthalonitrile and 1-{[(benzo-15-crown-5)-4′-yl]oxy}phthalonitrile in the presence of anhydrous metal salts. All the target unsymmetrical phthalocyanines were separated by column chromatography and characterized elemental analyses, ¹H NMR, IR, mass and UV–Vis spectral data. Electrochemical behaviors of Cu (II) phthalocyanine by cyclic voltammetry and differential pulse voltammetry techniques gave two common phthalocyanine ring reductions and one ring oxidation processes. Peak-to-peak separation of the processes II and III (388 mV) and the measure of gap (1.672 V) between the HOMO and LUMO for the complex, fits a phthalocyanine with electrochemically inactive metal center.     

Characteristics of microemulsion polymerized styrene with water-soluble versus oil-soluble initiators

The effect of oil-soluble versus water-soluble free-radical generators in the polymerization of styrene in oil-in-water (O/W) micromulsions were investigated by photon correlation spectroscopy. The microemulsions were formed by styrene, brine, sodium dodecyl sulfate (SDS), and pentanol. The polymerizations were carried out in two microemulsions that contained droplets differing by a factor of 2.4 in volume. Under the conditions of ? = 0.019 and NaCl/SDS > 2 the microemulsions were stable and the droplets were independent of one another. Both oil-soluble and water-soluble initiators produced polystyrene that contained fractions of two different sizes. In the case of the oil-soluble initiator the droplet size in the microemulsion seemed to be correlated to the size of the product whereas in the case of the water-soluble initiator, there seemed to be little relation.     

Effect of Polycondensation Reaction Conditions on the Properties of Thermotropic Liquid‐Crystalline Copolyester

In this study a range of wholly aromatic copolyesters based on kink m‐acetoxybenzoic acid (m‐ABA) monomer (33 mol%) and equimolar‐linear p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA) and terephthalic acid (TPA) monomers (67 mol%) have been synthesized by melt polycondensation reaction process at 280°C and 260°C for different time intervals. Characterization of copolyesters were performed by solution viscosity measurement, wide–angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), hot‐stage polarized light microscopy, proton‐nuclear magnetic resonance analysis (¹H‐NMR). According to the results obtained, copolyesters showed thermotropic liquid crystalline behavior in an appropriate temperature range. The copolyesters were prepared in high yields. It was observed that the intrinsic viscosities of the copolyesters are increased regularly with increasing polymerization time and temperature. All the copolyesters were soluble in a trifluoroacetic acid/dichloromethane (30:70 v/v) except the copolyesters which were synthesized at 280°C in 5 h. According to the WAXD results; the degree of crystallinity of copolyesters were found to be between 5–15%. DSC and hot stage polarized light microscopy results showed that all the copolyesters are melt processable and a significant molecular interaction exist in a very broad temperature range (160°C and 165°C) in the nematic mesophase. The T_g values are increased with an increasing polycondensation reaction time and temperature and they were observed between 93–126°C. Fibers prepared by a hand‐spinning technique from the polymer melt exhibit well‐developed fibrillar structure parallel to the fiber axis.     

Surface characterization and radical decay studies of oxygen plasma‐treated PMMA films

Polymethylmethacrylate (PMMA) films were modified by RF oxygen plasma with various powers applied for different periods, and the effects of these parameters on the surface properties such as hydrophilicity, surface free energy (SFE), chemistry, and topography were investigated by water contact angle, goniometer, X‐ray photoelectron spectroscopy (XPS), and atomic force microscopy, and the types of the created free radicals and their decay were detected by electron spin resonance spectroscopy (ESR). SFE and contact angle results varied depending on the plasma parameters. Oxygen plasma treatment (100 W–30 min) enhanced the hydrophilicity of PMMA surface as shown by decreasing the water contact angle from 70° to 26°. XPS analysis showed the change in the amounts of the present functionalities as well as formation of new groups as free carbonyl and carbonate groups. The roughness of the surface increased considerably from ~2 nm to ~75 nm after 100 W–30 min oxygen plasma treatment. ESR analysis indicated the introduction of peroxy radicals by oxygen plasma treatment, and the intensity of the radicals increased with increasing the applied power. Significant decrease in radical concentration was observed especially for the samples treated with higher powers when the samples were kept under the atmospheric conditions. As a conclusion, RF plasma, causes changes in the chemical and physical properties of the materials depending on the applied parameters, and can be used for the creation of specific groups or radicals to link or immobilize active molecules onto the surface of a material. Copyright © 2012 John Wiley & Sons, Ltd.