排序方式: 共有28条查询结果,搜索用时 15 毫秒
1.
Resistivity-temperature characteristics of sol gel YBa2Cu3Oy samples synthesized in flowing oxygen atmosphere 下载免费PDF全文
The relationship of resistivity versus synthesizing temperature of sol gel YBa_2Cu_3O_y samples was studied when prepared under flowing oxygen conditions. A set of high-temperature ρ-T curves was obtained for the whole process. After the sample finished the test measuring, its resistivity was ρ_{300}=9.83×10^{-3 }Ω·cm at room temperature. The ρ-T curve also showed that the orthorhombic-tetragonal phase transformation of sol-gel YBa_2Cu_3O_y sample occurred at 581℃ for the sample in the rising temperature process, but at 613℃ in the cooling process, lower than that of the samples made by using the conventional powder metallurgy methods. 相似文献
2.
Cu/ZnO/Al_2O_3/ZrO_2催化剂上乙醇脱氢合成乙酸乙酯Ⅰ.催化反应性能及机理 总被引:2,自引:0,他引:2
研究了经ZrO2改性的Cu/ZnO/Al2O3的催化性能,考察了操作条件、ZrO2含量及不同原料的影响.发现经共沉淀法制备的Cu/ZnO/Al2O3/ZrO2具有最佳的反应活性及选择性.以95%乙醇为原料,在265℃,WHSV1.5h-1时,乙醇转化率为69.0%,乙酸乙酯选择性为70.2%.使用无水乙醇为原料要好于95%乙醇,使用乙醛或醇醛混合原料,亦有乙酸乙酯生成.乙醇在此催化剂上的反应机理为乙醇先在Cu上脱氢为乙醛,然后乙醛在酸碱双中心上发生Cannizarro反应生成乙酸乙酯.还讨论了ZrO2的作用及催化剂活性降低的原因 相似文献
3.
4.
5.
6.
采用改进的两步高温固相熔融法制备了Yb^3+、Eu^3+、La^3+共掺杂CaF 2的上转换荧光粉。基于荧光猝灭原理,通过改变La^3+掺杂浓度来调节CaF 2∶Yb^3+/Eu^3+材料的发光性能,并在980 nm近红外光激发下,获得了该材料的白色上转换发光(UCL)。在该发光体系中,Yb^3+不仅起到了敏化Eu^3+的作用,同时,Yb^3+二聚体(Yb^3+-dimer)自身合作发出波长范围480~540 nm的绿色荧光。而白光三基色中的绿光正是来自Yb^3+二聚体的合作发光。Eu^3+则作为激活剂,同时发出红色和蓝色荧光。荧光寿命测试结果表明Yb^3+-dimer与Eu^3+之间存在有效的能量传递。值得注意的是,在980 nm激光激发下,1%La^3+掺杂的样品表现出最佳的红、绿、蓝三基色光比列,实现了材料的上转换白光发射,其色度坐标为(0.311,0.340)。 相似文献
7.
Synthesis of the titanium silicalite TS-1 was first reported by Taramasso et al[1]in 1983. TS-1 has received considerable interest during the last decade because of its unique catalytic properties in oxidation reactions involving H2O2 as the oxidant. It is accepted that the extraframework Ti species in TS-1 favor the decomposition of H2O2and should be avoided. But in the present study, it was observed that there was a kind of Ti species inactive in both the oxidation reaction and the decomposition of H2O2. 相似文献
8.
气固相同晶取代法制备Ti-ZSM-5及其催化性能的研究 总被引:5,自引:0,他引:5
以B-ZSM-5沸石为母体,经过盐酸洗涤脱硼后,采用气固相同晶取代法制备了Ti-ZSM-5沸石.考察了制备条件如反应温度、反应时间和载气流速等对产品沸石中钛物种的配位状态和含量的影响.发现进入Ti-ZSM-5骨架中的钛含量存在一个极限值.FT-IR、UV-Vis表征技术和丙烯环氧化反应结果表明:不同气固相反应条件下制备的Ti-ZSM-5沸石具有不同的物化性质.骨架钛含量高而非骨架钛含量低的钛沸石具有较高的丙烯环氧化催化活性. 相似文献
9.
通过实验详细测量了水温、工作电流对二极管激光器发射波长的影响;采用光线追踪法模拟计算出在不同泵浦参数下半导体泵浦光在NdYAG棒内的分布情况,得到了圆周上泵浦模块的个数,泵浦光发散角等因素对泵浦光分布均匀性的影响.采用直接泵浦方式,分别设计了二种不同功率水平的半导体泵浦的NdYAG固体激光器聚光腔,得到了170和800 W的输出功率,并对激光器的输出特性进行详细测量,最大光-光转换效率达37%,电-光转换效率约为16%. 相似文献
10.
Cu/ZnO/Al2O3/ZrO2催化剂上乙醇脱氢合成乙酸乙酯Ⅰ.催化反应性能及机理 总被引:5,自引:0,他引:5
研究了经ZrO2改性的Cu/ZnO/Al2O的催化性能,考察了操作条件,ZrO2含量及不同原料的影响,发现经共沉淀法制备了Cu/ZnO/Al2O3/ZrO2具有最佳的反应活性及选择性以95%乙醇为原料,在265℃,WHSV1.5h^-1,乙醇转化率为69.0%,乙酸乙酯选择性为70.2%,使用无水乙醇为原料要好地95%乙醇,使用乙醛或醇醛混合原料,亦有乙酸乙酯生成,乙醇在此催化剂上的反应机理为乙醇 相似文献