Experimental Verification of Left-Handed Metamaterials Composed of Coplanar Electric and Magnetic Resonators

We verified experimentally left-handed metamaterials （LHM） composed of coplanar electric and magnetic resonators. A typical LHM sample composed of coplanar resonator unit cells was fabricated, investigated and tested. The experimental results show that the tested sample has a left-handed band of width 1.4 GHz in the X band. The experimental results agree quite well with the simulation ones. Moreover, both the simulation and experimental results show that the LHM under study can automatically achieve good impedance-matching in the left-handed band.     

基于高介电常数基板和金属结构负折射材料的设计,仿真与验证

通过将单回路镜像对称开口金属环结构印制在高介电常数基板上,实现了一种金属含量比传统负折射材料更少,"双负"通带比全介质负折射材料更宽的负折射材料.分析了高介电常数基板产生负介电常数以及"双负"通带形成的机理,通过仿真实验分析了影响"双负"通带的因素.通过制作样品验证了这一机理实现"双负"的可行性,理论分析与实验结果都表明这种方法可实现较宽频段内的"双负"通带. 关键词： 负折射材料 负介电常数 负磁导率 介质谐振器原理     

海胆状氧化锌/羰基铁粉核壳结构复合粒子的抗氧化及吸波性能

针对羰基铁粉吸收剂在温度较高时易被氧化的问题,采用水热法制备了氧化锌包覆羰基铁粉核壳结构复合粒子,并分别将羰基铁粉和氧化锌/羰基铁粉核壳粒子与石蜡混合,制备复合材料。结果表明,氧化锌纳米棒致密的包覆在羰基铁粉颗粒表面形成海胆状核壳结构复合粒子,正是这种结构将羰基铁粉颗粒与空气隔绝,使得复合粒子的抗氧化性能得到显著改善。与羰基铁粉复合吸波材料相比,氧化锌/羰基铁粉核壳粒子的复合材料吸收峰稍向低频移动,反射损耗小于-5 d B的带宽几乎保持不变,在不改变电磁吸波性能的前提下,提高了羰基铁粉粒子的使用温度。     

折射率正负梯度交替表面的研究

利用不均匀材料提出了一种折射率正负梯度交替表面, 并利用几何光学法和电磁场数值仿真方法对其机理进行了研究与验证, 发现其可以操控电磁波的传播: 在一定的参数下, 其可以将空间中的入射电磁波一直束缚在介质中, 或在介质中传播一定距离后再实现电磁波的释放; 同时该结构具有宽带、极化无关等特性. 利用该结构可引导能流, 减小后向散射截面, 可用作隐身表面.     

PLZST反铁电陶瓷电场诱导相变与相稳定性的研究

在三方铁电(FE)-四方反铁(AFE)的准同型相界附近制备了一系列组份为(Pb_0.97La_0.02)(Zr_1-x-ySn_yTi_x)O₃(x=0.09或0.1;0.16≤y≤0.38)的反铁电陶瓷.研究了Sn含量y对电场诱导AFE→FE相变电场E_c、反铁电双电滞回线损耗ΔE、以及温度诱导FE→AFE相变温度T_FE，AFE→顺电(PE)相变温度T_c的影响.沿AFE-FE相界Ti含量一定的条件下，E_c随着Sn含量y的增加而增大，ΔE减小，T_FE与T_c均降低.场诱相变的回线参量E_c，ΔE与相变温度T_FE和T_c相关联.在直流偏压下用原位X-射线衍射表征了相变时晶格结构的变化，结果表明，当电场达到AFE→FE相变临界场时，伴随相变的发生，晶格结构由四方相转变为三方相，晶胞体积增大. 关键词：     

Tunneling effect in cavity-resonator-coupled arrays

The quantum tunneling effect (QTE) in a cavity-resonator-coupled (CRC) array was analytically and numerically investigated. The underlying mechanism was interpreted by treating electromagnetic waves as photons, and then was generalized to acoustic waves and matter waves. It is indicated that for the three kinds of waves, the QTE can be excited by cavity resonance in a CRC array, resulting in sub-wavelength transparency through the narrow splits between cavities. This opens up opportunities for designing new types of crystals based on CRC arrays, which may find potential applications such as quantum devices, micro-optic transmission, and acoustic manipulation.     

外加电场法制备LiNbO3周期畴的反转电流特性研究

采用外加电场法制备了LiNbO3单晶周期畴结构.在对不同尺寸周期畴的反转电流进行比较研究的基础上,提出了一种确定反转畴成核时间和纵向贯穿速率的方法.根据这一方法,得到在电场强度为25.1 kV/mm,脉冲宽度为50 ms的脉冲方波作用下,LiNbO3单晶反转畴的成核时间约为80 ns,纵向贯穿速率约为O.1667 m/s.     

负脉冲激励下PLZST电子发射特征及发射机理研究

采用固态烧结工艺制备了位于反铁电/铁电相界附近的掺镧锆锡钛酸铅（PLZST）反铁电陶瓷样品.采用该样品作为阴极材料,研究了其在负脉冲激励电场下的电子发射行为.负脉冲激励下,0.5 mm厚PLZST反铁电陶瓷圆片发射阈值电压为500 V;当激励电压为500 V,抽取电压为3.5 kV时,得到690 A发射电流.结果表明,PLZST反铁电陶瓷发射阈值电压低,发射电流大,即使激励电场低于陶瓷的正向开关电场,仍能得到强发射电流.最后,讨论了PLZST反铁电陶瓷在负脉冲激励下电子发射内在机制. 关键词： 反铁电材料 铁电阴极 电子发射     

二维光子晶体功率分配与合成的仿真

利用平面波展开法,绘出了光子晶体的能带结构图,揭示了光子晶体能带结构的特点.在带隙结构中引入线缺陷,实现了对电磁波传播方向的控制.通过设计不同的线缺陷分布,实现了对电磁波传输能量的分配与合成.最终完成了对电磁波传播方向的控制和功率分配及合成的引导.采用Comsol Multiphysics软件对空气背景不同形状的介质光子晶体进行功率分配与合成的仿真,结果表明,在光子晶体中通过对线缺陷的设计,可实现功率的分配与合成.     

A planar left-handed metamaterial based on electric resonators

A planar left-handed metamaterial(LHM) composed of electric resonator pairs is presented in this paper.Theoretical analysis,an equivalent circuit model and simulated results of a wedge sample show that this material exhibits a negative refraction pass-band around 9.6GHz under normal-incidence and is insensitive to a change in incidence angle.Furthermore,as the angle between the arm of the electric resonators and the strip connecting the arms increases,the frequency range of the pass-band shifts downwards.Consequently,this LHM guarantees a relatively stable torlerence of errors when it is practically fabricated.Moreover,it is a candidate for designing multi-band LHM through combining the resonator pairs with different angles.