多壁碳纳米管膜湿敏特性的研究

研究了多壁碳纳米管(MWNTs)薄膜的湿敏特性，实验所用的多壁碳纳米管是用热灯丝化学气相沉积法(CVD)合成的.分别对未修饰和修饰的多壁碳纳米管膜温度和湿度特性进行研究后发现，修饰的多壁碳纳米管对温度和湿度非常敏感，且对湿度的响应时间和恢复时间短，重复性好.而未修饰的多壁碳纳米管对温度和湿度不太敏感.对修饰多壁碳纳米管的湿敏特性进行了理论分析，给出了其理论表示式. 关键词： 多壁碳纳米管 化学修饰 湿敏特性 物理吸附     

利用爆磁压缩发生器产生高功率脉冲高电压

 爆磁压缩发生器产生脉冲高电压技术可以用于产生高功率微波及强电磁脉冲的实验研究。给出了利用螺旋型爆磁压缩发生器（HEMG）驱动电爆炸丝功率调节系统产生高功率脉冲高电压的实验方法和主要的结果。在利用HEMG驱动电爆炸丝断路开关（EEOS）产生脉冲高电压实验中，获得了最高电压700~800kV,功率大于20GW的脉冲输出。     

纳米KMn8O16粉体的室温固相合成与表征

室温或近室温固相反应要求绿色化、清洁化[1,2]。我们以KMnO4和MnCl2·4H2O为原料,用室温固相氧化还原反应制备氧化锰粉体时,得到了一种对H2O2分解具有较高催化活性的纳米KMn8O16粉体,用XRD、SEM、IR等技术对其进行了表征,发现研磨时间对粉体性能有显著影响。1　实验部分1 1　粉体的制备按摩尔比(2∶3)准确称取一定量的分析纯KMnO4和MnCl2·4H2O,分别置于玛瑙研钵中充分研细,再混合研磨,固相反应立即发生,体系颜色逐渐加深,并有刺激性气体产生,充分研磨后70℃恒温12h,固相产物依次经水洗至中性、醇洗、抽滤,真空干燥得黑色粉…     

High-Average-Power Nanosecond Quasi-Phase-Matched Single-Pass Optical Parametric Generator in Periodically Poled Lithium Niobate

A pulsed nanosecond optical parametric generator (OPG) in periodically poled lithium niobate (PPLN) crysal is presented. The pump laser is an acousto-optically Q-switched Nd:YVO4 laser with the maximum average power of 6.58 W. When the repetition rate is 50kHz and the pulse width of the pump source is 80ns, the maximum average total output power of the single-pass PPLN OPG is about 1.9 W, which includes 1.322 W of 1.536μm signal radiation. The length of the PPLN crystal is only 38.7mm (at room temperature) with a grating period of 28.93μm (at room temperature). The 1.502-1.536μm signal radiation and 3.652-3.465μm idler radiation are obtained by adjusting the PPLN crystal temperature from 155℃ to 250℃.     

Synthesis, Crystal Structure, Fluorescent and Thermal Properties of Sodium Tridecafluorodizirconate Na_5Zr_2F_(13) Compound

1 INTRODUCTION Considerable research effort on the heavy metal fluoride glasses like barium, zirconium fluoride and a series of rare-earth fluorozirconate compounds du- ring the last two decades was initiated by the broad optical transmission window of these glasses and thereby the potential for ultralow-loss optical fi- bers[1~10]. The fluorozirconate of alkali metals was first reported in 1938[11], and most of the sodium and potassium fluorozirconates were reported amongthe 1940s and 19…     

Theoretical Studies on the Si（001）-SiO2 Interface Structure

1 INTRODUCTION Silicon and its alloy have been widely applied in such fields as electronic industry, high-temperature structural ceramics, etc. In addition, the researches on silicon and its relevant materials greatly promote the rapid development of modern optics and infor- mation technology. Therefore, more and more at- tention is focused on the structure of silicon, oxide of silicon and the interfaces between silicon and metal or nonmetal. As an ideal passive film on the Si surface, S…     

高频单线圈双调谐NMR单晶探头的研制

本文报道了一种测角单晶NMR探头。该探头采用单线圃双调谐电路,工作频率在90MHz-110 MHz连续可调,可进行交叉极化大功率去耦实验。文中提出了一种简单而有效的测角装置,可使单晶绕三个互相垂直轴转动实现单晶的NMR测量。作为典型的应用例子,本文利用该探头实现了单晶DGO(2NH₂CH₂COOH·H₂C₂O₄)屏蔽张量的测量。     

An Economical Magnetocardiogram System Based on High-To SQUIDs

An economical magnetocardiogram （MCG） system is built in our laboratory. It mainly consists of a MCG data acquisition stage equipped with two high-To superconducting quantum interference device （SQUID） magnetometers, a data processing stage with digital filtering and a one-layer μ-metal magnetically shielded room in conjunction with a high-Tc SQUID based active compensation. Experimental results show that a noise level of pico-tesla in MCG profiles, which is necessary for clinical applications, may be achieved with the system. Moreover, stable and convenient operations of the system are demonstrated with simulating MCG measurements.     

A Comparison of Different Measures for Dynamical Event Mean Transverse Momentum Fluctuation

Various measures for the dynamical event mean transverse momentum fluctuation are compared with the real dynamical fluctuation using a Monte Carlo model. The variance calculated from the G-moments can reproduce the dynamical variance well, while those obtained by subtraction procedures are approximate measures for not very low multiplicity. Фpt, proposed by Gadzicki M and Mrowczynski S [Z. Phys. C 54 (1992)127], can also serve as an approximate measure after being divided by the square root of mean multiplicity.