TiO2光催化反应及其在环境保护中的应用

本文简要介绍了TiO2光催化剂的作用机理，讨论了影响TiO2光催化效率的因素及解决途径，综述了光催化在环境保护中的最新应用。     

Odd/even effect in the chain length on the enthalpy of micellization of gemini surfactants in aqueous solution

The micellization properties of cationic symmetric gemini surfactants, [CmH(2m+1)(CH3)2N(CH2)6N(CH3)2CmH(2m+1)]Br2 (designated as CmC6CmBr2, with m = 7, 8, 9, 10, 11, 12, and 16), has been investigated by isothermal titration microcalorimetry. The critical micelle concentration (CMC) and enthalpy of micellization (DeltaHmic) were determined from calorimetric titration curves. The linear decreasing of log CMC with increasing the length of the hydrophobic chain is consistent with an increase in the hydrophobicity of the alkyl chain. Interestingly, with increasing the length of the alkyl chain, the DeltaHmic values of the surfactants with even numbered alkyl chains vary from endothermic to exothermic, whereas the DeltaHmic values of the surfactants with odd numbered alkyl chains are all endothermic and tend to become more endothermic. The pronounced even/odd effect in DeltaHmic is discussed with respect to the "donor-acceptor" interaction.     

Microcalorimetric study on micellization of nonionic surfactants with a benzene ring or adamantane in their hydrophobic chains

The micellization of a novel family of nonionic surfactants poly(oxyethylene) glycol alkyl ethers has been studied by microcalorimetry. One of the surfactants has adamantane, and the other nonionic surfactants have a benzene ring in their hydrophobic chains, which moves from the terminal of the hydrophobic chain toward the headgroup. Moreover, the alkyl chain of the nonionic surfactants is straight or branched. Both the critical micelle concentration (cmc) and the thermodynamic parameters associated with the micelle formation have been obtained. The cmc decreases and the enthalpy of micelle formation (deltaH(mic)) becomes less positive gradually as the length of hydrophobic chain increases, whereas the values of cmc and deltaH(mic) tend to increase for the surfactants with a longer ethylene oxide chain. However, the deltaH(mic) value of the surfactant with seven carbon atoms in a hydrophobic chain is more positive than that of the surfactant with six carbon atoms in a hydrophobic chain. Comparing with the nonionic surfactant with a methylene hydrophobic chain, the surfactants with benzene rings and adamantane groups have larger cmc values and the cmc values increase with the size of the groups. Furthermore, moving the phenyl group from the terminal of the hydrophobic chain to the neighbor of the hydrophilic headgroup leads to the decreased cmc. Both the variation of hydrophobic interaction from the movement of phenyl group and pi-pi interaction among adjacent phenyl groups affect deltaH(mic) values.     

XRD法研究CrO3与NaY、NaM分子筛的表面相互作用

负载于多孔性、高比表面载体上的三氧化铝是重要的工业催化剂，多年来人们对催化剂中Croa的存在状态以及与载体的相互作用进行了广泛的研究［‘－4］，发现CrO。能在载体表gn散成非晶相的表面化合物，非晶相Cr（VI）具有较高的催化活性．我们曾经对MoO。／NaY，MoO。／NaM体系进行过系统的研究，发现MOO。与分子筛载体间存在强表面相互作用［’］．在此研究基础上，选择了CrO3／NaY、CrO。／NaM体系，采用XRD法对上述体系进行了研究．结果表明170oC下晶相CrO。能在NaY、NaM分子筛上自发分散成非晶相Cr（VI），且分散量大．C…     

Further results on stabilization of neural-network-based systems using sampled-data control

Nonlinear Dynamics - This paper investigates the problem of stabilization for sampled-data neural-network-based systems under variable sampling. A novel Lyapunov–Krasovskii functional (LKF)...     

冰冻人血清中尿酸标准物质复制的定值EI北大核心CSCD

为了满足该标准物质的需求,进行了第二次尿酸血清标准物质的复制。针对复制的尿酸血清标准物质,基于单四极杆质谱的液相色谱-同位素稀释质谱法(LC-IDMS),用乙腈沉淀法去除蛋白质,BEH C18色谱柱和电喷雾离子源负离子模式(ESI^(-)),同位素稀释的单点校准法进行定值、均匀性检验、稳定性检验以及不确定度评定等研究。此定值方法经过CCQM-K109(血清中尿酸分析)国际关键比对进行验证。复制的2种不同浓度水平尿酸(肾病患者和正常人)血清标准物质的定值结果分别为(73.5±1.3)μg/g,(47.5±1.1)μg/g,其均匀性和稳定性评估结果良好。     

The effect of zirconium phosphonate with different functional groups on the structure and properties of chitosan film

Three types of zirconium phosphonate (org‐ZrP) with different functional groups (―COOH, ―SO₃H, ―NO₂) were prepared first and then added into chitosan (CS) matrix, respectively. The effect of these functional groups on structure, morphologies, and mechanical properties of chitosan films was investigated. The Fourier transform infrared spectroscopy revealed that org‐ZrP had intensely interacted with chitosan in the composites because of introducing functional groups on the fillers. The composite films filled with zirconium sulfophenylphosphonate exhibited the best mechanical properties among the three org‐ZrP fillers. These differences of reinforcement effect appeared to be caused by the difference of interfacial interactions between the org‐ZrP fillers and matrix. The stronger the interfacial interactions are, the better the reinforcement effect is. In addition, the moisture uptake (Mu) of CS/org‐ZrP‐n composite films depended on the hydrophilic property of functional groups. It was found that zirconium nitrophenyl phosphonate showed the best moisture barrier property due to its poor absorbability for water molecules. Copyright © 2014 John Wiley & Sons, Ltd.     

A Universal Graphene Quantum Dot Tethering Design Strategy to Synthesize Single-Atom Catalysts

A general graphene quantum dot-tethering design strategy to synthesize single-atom catalysts (SACs) is presented. The strategy is applicable to different metals (Cr, Mn, Fe, Co, Ni, Cu, and Zn) and supports (0D carbon nanosphere, 1D carbon nanotube, 2D graphene nanosheet, and 3D graphite foam) with the metal loading of 3.0–4.5 wt %. The direct transmission electron microscopy imaging and X-ray absorption spectra analyses confirm the atomic dispersed metal in carbon supports. Our study reveals that the abundant oxygenated groups for complexing metal ions and the rich defective sites for incorporating nitrogen are essential to realize the synthesis of SACs. Furthermore, the carbon nanotube supported Ni SACs exhibits high electrocatalytic activity for CO₂ reduction with nearly 100 % CO selectivity. This universal strategy is expected to open up new research avenues to produce SACs for diverse electrocatalytic applications.     

硝酸根接枝诱导组装金红石相TiO2纳米束以增强光催化产氢（英文）

化石燃料的快速消耗加速了全球能源危机和环境污染等问题.光催化产氢直接利用清洁和可持续的太阳能实现向化学燃料的转化,因而成为一种有前景的技术.众多半导体光催化剂中,二氧化钛因其高光催化活性、稳定的化学性质、低成本和无毒等优势而被广泛用作分解水产氢的光催化剂.最近,金红石相TiO2纳米晶体在某些情况下被证明具有光催化的潜力,然而其光生电子-空穴对的快速复合显著抑制了光催化效率.表面修饰、构建异质结和负载助催化剂等策略被用来提高光生载流子的分离效率以减少复合损失,从而提升光催化活性.由于光催化反应通常发生在光催化剂的表面活性位点上,因此通过改善表面性质改变电荷转移途径对光催化活性具有重要影响.磷酸、硫酸、硼酸和盐酸等无机酸的修饰可以改变光催化剂的表面基团,分别通过促进表面羟基的形成和氧气的吸附以及改变表面电荷性质更有效地捕获空穴,实现光生电子和空穴的分离,有助于光催化降解有机污染物.然而,这种影响机制显然不适用于光催化产氢体系,目前对无机酸修饰用于分解水产氢的研究鲜有报道.因此,通过酸改性策略制备高效产氢的光催化剂仍然是一个相当大的挑战.本文利用硝酸诱导策略合成纺锤状金红石相二氧化钛纳米束(R-TiO2).首先,制备层状质子化钛酸盐(LPT)作为TiO2的前体,随后,加入浓硝酸以诱导向金红石相TiO2的转变,并组装形成纺锤状纳米束.对照实验显示,硝酸的酸化可以诱导LPT向金红石相TiO2的转变,而相同条件下浓硝酸后处理不会引起晶相的转变.纺锤形纳米束的形成源于,硝酸诱导R-TiO2沿(110)方向生长并彼此粘附,硝酸诱导组装过程成功在TiO2表面修饰上硝酸根,同时扩大了光吸收范围,有效减少了电荷复合损失.光催化产氢测试证明了R-TiO2光催化剂具有高效的产氢性能,产氢速率为402.4μmol h-1,是Degussa P25的3.1倍,并且显著高于未经浓硝酸处理的锐钛矿(52.0μmol h^-1)或金红石相(110.8μmol h^-1)光催化剂.为了说明表面硝酸根的影响,分别从晶体和化学结构、形态以及表面电荷性质方面比较了光催化反应前后的变化,结果表明,R-TiO2增强的光催化效率可归因于硝酸根基团的负场效应,有利于在表面上捕获带正电的质子以促进载流子分离,提高光催化产氢的效率.总之,本工作不仅对于发展表面修饰策略制备高效产氢光催化剂的研究具有重要意义,而且提出了一种不同于文献报道的无机酸影响机制.