The structure of zwitterionic phosphocholine surfactant monolayers

The structure of a zwitterionic phosphocholine (PC) surfactant monolayer adsorbed on the surface of water has been determined using neutron reflectivity in combination with H/D isotopic substitution. The most significant results of this study are the level of hydration of the PC headgroup and the lack of dehydration with increasing temperature and salt addition. The fraction of the alkyl chain (f(c)) immersed in water for all three chain isomers studied was found to be around 0.15, suggesting that the PC headgroup geometries influenced not only the headgroup hydration but also the degree of immersion of the alkyl chain in water. At the critical micelle concentration (CMC), the number of water molecules associated with the PC headgroup in C(m)PC (m = 12, 14, 16) was on order of 15. This value was significantly greater than that obtained for nonionic and ionic surfactants with similar limiting area per molecule at the CMC (A(cmc)). However, the fraction of the chain immersed in water for the ionic and nonionic surfactants was much greater. This suggests that the unique surface biocompatibility of PC surfactants arises from their strong affinity for water, and the relatively low fraction of mixing with the alkyl chain arises from the higher structural order within the PC monolayer. As surface coverage decreased, the number of water molecules associated with each PC headgroup increased, but f(c) remained constant for all the surfactants. This observation was consistent with the small variation in the thickness of the headgroup region, and the entire layer changed little with surfactant concentration. This is attributed to the role of PC headgroup geometries to maintain the conformational order within the layer as packing density varies. Further structural analysis based on a kinematic approach showed that, as the chain length was increased from C12 to C14 to C16 at the CMC, the angle of tilt for the alkyl chain increased from 40 degrees to 48 degrees to 53 degrees , respectively, whereas the thickness of the whole layer and that of the PC head region was largely constant. The almost vertical projection of the PC headgroup from these single alkyl chain surfactants is in sharp contrast to its strongly tilted conformation, as reported for dichain phospholipids such as dipalmitoyl glycerol phosphocholine (DPPC).     

Enhanced interfacial properties of novel amino acid-derived surfactants: Effects of headgroup chemistry and of alkyl chain length and unsaturation

Amino acid-derived surfactants have increasingly become a viable biofriendly alternative to petrochemically based amphiphiles as speciality surfactants. Herein, the Krafft temperatures and critical micelle concentrations (cmc) of three series of novel amino acid-derived surfactants have been determined by differential scanning microcalorimetry and surface tension measurements, respectively. The compounds comprise cationic molecules based on serine and tyrosine headgroups and anionic ones based on 4-hydroxyproline headgroups, with varying chain lengths. A linear dependence of the logarithm of cmc on chain length is found for all series, and in comparison to conventional ionic surfactants of equal chain length, the new amphiphiles present lower cmc and lower surface tension at the cmc. These observations highlight their enhanced interfacial performance. For the 18-carbon serine-derived surfactant the effects of counterion change and of the presence of a cis-double bond in the alkyl chain have also been investigated. The overall results are discussed in terms of headgroup and alkyl chain effects on micellization, in the light of available data for conventional surfactants and other types of amino acid-based amphiphiles reported in the literature.     

Fluorescence spectroscopy of fulvic acids’ interaction with surfactants

Fluorescence spectra of two fulvic acid (FA) samples, FA0 from underground water and FA1 from forest soil, were recorded in various surfactant solutions. Alkyltrimethylammonium ions with different alkyl chain lengths induced a decrease in the fluorescence intensity for both FAs at concentrations below the critical micelle concentration (cmc) and an enhancement above the cmc. The intensity minimum thus obtained at the cmc was deeper for surfactants with longer alkyl chains. This effect was attributable to the formation of insoluble FA–surfactant complexes below the cmc and to the solubilization of the complex into micelles above the cmc. Dodecylpyridinium chloride caused a monotonic decrease in the FA fluorescence even far above the cmc. This was attributable to the quenching of FA fluorescence by the positioning of the pyridinium head group near the FA fluorophore. Anionic and nonionic surfactants showed little to no effect on the FA fluorescence.     

全氟壬烯氧基苯磺酸钠与烷基季铵盐的相互作用

通过六氟丙烯三聚体(全氟壬烯)氧基苯磺酸钠(C₉F₁₇OC₆H₄SO₃Na, OBS)与阳离子碳氢表面活性剂C_nNR[C_nH_2n+1N(CH₃)₃Br, C_nNM, n=8, 10和C_nH_2n+1N(CH₂CH₃)₃Br, C_nNE, n=8, 10, 12]复配, 研究了OBS与C_nNR的摩尔比、 C_nNR疏水链长及C_nNR亲水基团大小对此类阴、 阳离子碳氟-碳氢表面活性剂混合体系的临界胶束浓度(cmc)、 最低表面张力(γ_cmc)、 总饱和吸附量(Γ_tm)及极限分子面积(A_min)的影响. 结果表明, 通过与C_nNR复配, OBS的cmc和γ_cmc均大幅下降, 达到了全面增效的结果. 不同摩尔比的OBS-C₈NE混合体系中, 摩尔比为1:1时表面活性最好, cmc和γ_cmc均最小; 偏离等摩尔比时, OBS过量时混合体系的cmc小于C₈NE过量时混合体系的cmc, 但γ_cmc相差不大. 与单体系相比, OBS-C₈NE混合体系的Γ_tm明显增大、 A_min明显变小. OBS与不同疏水链长的C_nNE复配时, cmc的变化规律为C₈NE>C₁₀NE>C₁₂NE, 表明C_nNE疏水链长的增加能降低混合体系的cmc. 通过比较C_nNM和C_nNE(n=8, 10)的表面活性发现, 改变混合体系中C_nNR的亲水基团大小对混合体系的表面活性无明显影响.     

Effect of hydrocarbon structure of the headgroup on the thermodynamic properties of micellization of cationic gemini surfactants: an electrical conductivity study

A series of cationic gemini surfactants butanediyl-1,4-bis(dodecyldialkylammonium bromide), C(12)H(25)N(+)(C(m)H(2)(m)(+1))(2)C(4)H(8)N(+)(C(m)H(2)(m)(+1))(2)C(12)H(25)·2Br(-), where m=1, 2, 3, 4, referred to as C(12)C(4)C(12)(Me), C(12)C(4)C(12)(Et), C(12)C(4)C(12)(Pr), and C(12)C(4)C(12)(Bu), respectively, were synthesized, and their thermodynamic properties of micellization were studied by electrical conductivity measurements. There existed a minimum critical micelle concentration (cmc) in the curve of cmc versus temperature, and the temperature of the minimum of cmc (T(min)) increased with increasing the headgroup alkyl chain length. The values of log (cmc) depended linearly on carbon number of the alkyl chains, but that was not true for the carbon number of the headgroup substituents. The temperature dependence of cmc and degree of counterion association (β) were used to calculate the Gibbs free energy (Δ(mic)G°), enthalpies (Δ(mic)H°) and entropies (Δ(mic)S°) of micelle formation for these gemini surfactants, and well correlated enthalpy-entropy compensation was observed. The analyses showed C(12)C(4)C(12)(Me) and C(12)C(4)C(12)(Et) behaved similarly in terms of thermodynamics of micellization, but they behaved differently from C(12)C(4)C(12)(Pr) and C(12)C(4)C(12)(Bu), which could be ascribed to the hydrophobicity and the location of the headgroup alkyl chains in the aggregates. These initial results indicate the headgroup alkyl chain plays an important role in influencing the thermodynamic properties of gemini surfactants.     

Micelle formation of nonionic surfactants in a room temperature ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate: surfactant chain length dependence of the critical micelle concentration

Micellization behavior was investigated for polyoxyethylene-type nonionic surfactants with varying chain length (C(n)E(m)) in a room temperature ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)). Critical micelle concentration (cmc) was determined from the variation of (1)H NMR chemical shift with the surfactant concentration. The logarithmic value of cmc decreased linearly with the number of carbon atoms in the surfactant hydrocarbon chain, similarly to the case observed in aqueous surfactant solutions. However, the slope of the straight line is much smaller in bmimBF(4) than in aqueous solution. Thermodynamic parameters for micelle formation estimated from the temperature dependence of cmc showed that the micellization in bmimBF(4) is an entropy-driven process around room temperature. This behavior is also similar to the case in aqueous solution. However, the magnitude of the entropic contribution to the overall micellization free energy in bmimBF(4) is much smaller compared with that in aqueous solution. These results suggest that the micellization in bmimBF(4) proceeds through a mechanism similar to the hydrophobic interaction in aqueous surfactant solutions, although the solvophobic effect in bmimBF(4) is much weaker than the hydrophobic effect.     

Adsorption and Micellization Properties of Novel Heterodouble‐Chained N‐Acyltaurate Surfactants

A set of heterodouble‐chained N‐acyltaurate surfactants (abbreviated as m+nP‐T, where m and n were carbon numbers of alkyl chain; P was phenyl; T was taurate) were synthesized. The novel amphiphiles contained sodium taurine as hydrophilic moiety and two different hydrocarbon chains as hydrophobic moiety. One was a long alkyl chain, and the other had an aromatic residue. Their surface properties were determined by Wilhelmy‐plate method, and micellization properties were investigated by fluorescence spectra of extrinsic probe and intrinsic probe. It was found that these surfactants showed some aberrant properties. It was difficult to obtain the equilibrium surface tension and critical micelle concentration (cmc) for the surfactants with two long chains. Pyrene was solubilized in micelle at concentration above cmc, and the fluorescent intensity ratio of the first vibronic peak (373 nm) to the third vibronic peak (383 nm) of pyrene decreased gradually. The aggregation number N, characterized by quenching the phenoxyl residue with methyl viologen (MV²⁺) as the extrinsic quencher, gradually increased with increasing surfactant concentration. These indicated that more and more molecules packed in a micelle with increasing concentration.     

Phenyl-ring-bearing cationic surfactants: effect of ring location on the micellar structure

A series of isomeric cationic surfactants (S1-S5) bearing a long alkyl chain that carries a 1,4-phenylene unit and a trimethyl ammonium headgroup was synthesized; the location of the phenyl ring within the alkyl tail was varied in an effort to understand its influence on the amphiphilic properties of the surfactants. The cmc's of the surfactants were estimated using ionic conductivity measurements and isothermal calorimetric titrations (ITC); the values obtained by the two methods were found to be in excellent agreement. The ITC measurements provided additional insight into the various thermodynamic parameters associated with the micellization process. Although all five surfactants have exactly the same molecular formula, their micellar properties were seen to vary dramatically depending on the location of the phenyl ring; the cmc was seen to decrease by almost an order of magnitude when the phenyl ring was moved from the tail end (cmc of S1 is 23 mM) to the headgroup region (cmc of S5 is 3 mM). In all cases, the enthalpy of micellization was negative but the entropy of micellization was positive, suggesting that in all of these systems the formation of micelles is both enthalpically and entropically favored. As expected, the decrease in cmc values upon moving the phenyl ring from the tail end to the headgroup region is accompanied by an increase in the thermodynamic driving force (ΔG) for micellization. To understand further the differences in the micellar structure of these surfactants, small-angle neutron scattering (SANS) measurements were carried out; these measurements reveal that the aggregation number of the micelles increases as the cmc decreases. This increase in the aggregation number is also accompanied by an increase in the asphericity of the micellar aggregate and a decrease in the fractional charge. Geometric packing arguments are presented to account for these changes in aggregation behavior as a function of phenyl ring location.     

A Viscometric and Conductometric Investigation of the Micellar and Solution Properties of Two-Headed Surfactant Systems, the Disodium 4-Alkyl-3-sulfonatosuccinates

A family of two-headed surfactants, the disodium 4-alkyl-3-sulfonatosuccinates, has been prepared by reacting maleic anhydride with the appropriate chain-length alcohol and subsequent addition of sodium bisulfite to the corresponding monoester. The properties of the micelles formed by these compounds in aqueous solution (aggregation numbers, degrees of counterion binding, and the cmc values) have been investigated as a function of temperature and surfactant chain length using viscosity, density, and conductance measurements. The critical micelle concentrations (cmc's) and the aggregation numbers appear to indicate that, in agreement with the earlier literature on other two-headed surfactants systems, these amphiphiles have higher cmc and lower aggregation numbers when compared to single-headed surfactants of comparable chain length. In addition, viscosity B coefficients and the thermodynamic parameters of activation of viscous flow have been determined. These results are interpreted in terms of the structure-making or -breaking properties of the surfactant amphiphiles below the cmc region. Finally, the thermodynamic properties of micelle formation have been estimated from the dependence of the cmc on the absolute temperature according to the charged pseudo-phase separation model of micelle formation. All these results are discussed in terms of how the addition of the second charged surfactant headgroup alters the micellar and solution properties of two-headed surfactants vs. their single-headed counterparts.     

New fluorescence method for the determination of the critical micelle concentration by photosensitive monoazacryptand derivatives

A novel fluorescence method for the determination of the critical micelle concentration (cmc) is reported. The cmc values of nonionic and anionic surfactants were evaluated utilizing a photosensitive monoazacryptand-Ba2+ complex, whose fluorescence intensity is sensitively changed by environmental conditions based on the photoinduced electron transfer (PET) mechanism as a fluorescent probe (PET method). Based on a comparison of the cmc values obtained by the PET method versus those obtained by conventional fluorescence-based methods as well as the values reported in the literature, one can conclude that the PET method is useful for the cmc determination. In particular, the PET method was more effective for the cmc determination of nonionic surfactants with very low cmc values (< 10(-5) M) than any other fluorescence-based method. In the cases of anionic surfactants, the PET method revealed the formation of the premicellar aggregates comprised of surfactant molecules and fluorescent probes below the cmc. Moreover, the hydrophobicity around the monoazacryptand-Ba2+ complex incorporated into various nonionic surfactant micelles was evaluated by this PET method.     

Solubilisation of camptothecin by nonionic surfactants and alkyldimethylamine oxides

The solubilisation of poorly soluble antineoplastic drug camptothecin by nonionic surfactants (polysorbates and octylphenol ethoxylates) and alkyldimethylamine oxide surfactants with the alkyl chain length 8 to 16 carbon atoms was investigated. The hydrophobicity of the solubilising agent turned out to be the primary structural parameter controlling the solubility efficiency of camptothecin in an aqueous solution. The quantitative parameter of solubilisation (drug loading coefficient) provided values in the range of 0.1–1.2% and 0.1–1.0% for alkyldimethylamine oxides and nonionic surfactants, respectively. The decreasing number of oxyethylene units and the extension of the hydrophobic part of nonionic surfactant molecule resulted in the increase of camptothecin solubility. From the dynamic light scattering measurements, the hydrodynamic diameter values of camptothecin-loaded alkyldimethylamine oxide and nonionic micelles were found in the range of 4–42 nm and 5–120 nm, respectively. The experimental values confirmed the increase in micellar size with the increasing alkyl chain length. The values of the packing parameter of camptothecin-loaded dodecyldimethylamine oxide micelles indicate their spherical shape at all the investigated surfactant concentrations. A simple computer model of camptothecin-loaded dodecyldimethylamine oxide micelle provided the diameter of the structure cross section which is consistent with the experimental values.      

Study of mixtures of n-dodecyl-beta-D-maltoside with anionic, cationic, and nonionic surfactant in aqueous solutions using surface tension and fluorescence techniques

Surfactants of practical interest are invariably mixtures of different types. In this study, mixtures of sugar-based n-dodecyl-beta-D-maltoside with cationic dodecyltrimethylammonium bromide, anionic sodium dodecylsulfate, and nonionic pentaethyleneglycol monododecyl ether in solution, with and without supporting electrolyte, have been studied using surface tension and fluorescence spectroscopic techniques. Interaction parameters and mole fraction of components in mixed micelles were calculated using regular solution theory. The magnitude of interactions between n-dodecyl-beta-D-maltoside and other surfactants followed the order anionic/nonionic > cationic/nonionic > nonionic/nonionic mixtures. Since all surfactants have the same hydrophobic groups, strengths of interactions are attributed to the structures of hydrophilic headgroups. Electrolyte reduced synergism between n-dodecyl-beta-D-maltoside and ionic surfactant due to charge neutralization. Industrial sugar-based surfactant, dodecyl polyglucoside, yielded results similar to that with dodecyl maltoside, implying that tested commercial alkyl polyglucosides are similar to the pure laboratory samples in synergistic interactions with other surfactants. Fluorescence study not only supported the cmc results using tensiometry, but showed that interfaces of all the above mixed micelle/solution interfaces are mildly hydrophobic. Based on these results, an attempt is made to discover the nature of interactions to be a combination of intermolecular potential energies and free energy due to packing of surfactant molecules in micelles.     

Role of the critical micelle concentration in the electrochemical deposition of nanostructured ZnO films under utilization of amphiphilic molecules

A detailed understanding of micelle formation that occurs above a critical micelle concentration (cmc) is a crucial point for the surfactant-assisted preparation of porous materials such as molecular sieves. However, the role of the cmc in the surfactant-assisted electrodeposition of porous oxides is widely unknown. In this study, we investigated the electrodeposition of ZnO films under utilization of alkyl sulfates and alkyl sulfonates with different chain lengths. Cmc values of the surfactants were measured directly in the electrodeposition bath by surface tension measurements. Subsequently, we performed electrodeposition with surfactant concentrations from above the cmc down to concentrations well below the cmc. Beside a lamellar ZnO phase already known from earlier studies, a second nanoparticular ZnO phase was found at concentrations below the cmc.     

Surface and micellar properties of new nonionic gemini aldonamide-type surfactants

A new group of gemini aldonamide-type surfactants-N,N'-bisalkyl-N,N'-bis[(3-gluconylamide)propyl]ethylenediamines, N,N'-bisdodecyl-N,N'-bis[(3-glucoheptonylamide)propyl]ethylenediamine, and N,N'-bisalkyl-N,N'-bis[(3-lactobionylamide)propyl]ethylenediamines, (alkyl: n-C(8)H(17), n-C(12)H(25)), were synthesized and characterized. The surface properties, such as surface excess concentration, Gamma(cmc), surface area demand per molecule, A(min), efficiency in surface tension reduction, pC(20), the effectiveness of surface tension reduction, gamma(cmc), critical micelle concentration, cmc, and a measure of the tendency of the surfactant to adsorb at the aqueous/air interface relative to its tendency to form micelles in the bulk surfactant solution, cmc/C(20), and standard free energy of micellization, DeltaG(mic)(0), have been obtained by means of surface tension measurements. The standard fluorescence shift technique using PRODAN as a probe provide confirmation of the cmc values by an alternative method. Additionally, the micellar properties for the concentration near above the cmc have been characterized by the aggregation number, N(agg). The presence of the dimeric segments with the aldonamide hydrophilic units in the surfactant molecule is found to be the source of their unusual physicochemical behavior. They are very efficient at adsorbing at the free surface and at forming micelles in water. Their critical micelle concentration values are remarkably low. They reveal remarkably low A(min) values in relation to conventional nonionic surfactants, which is unexpected from the molecular dimensions for the molecule but which is possible if one assumes some type of multilayer structure or a coherent interfacial film.     

Aqueous behaviour of cationic surfactants containing a cleavable group

The aggregation behaviour of two novel cationic RAFT agents (transfer surfactants); N,N-dimethyl-N-(4-(((phenylcarbonothioyl)thio)methyl)benzyl)ethanammonium bromide (PCDBAB) and N-(4-((((dodecylthio)-carbonothioyl)thio)methyl)benzyl)-N,N-dimethylethanammonium bromide (DCTBAB) in diluted solutions have been investigated by surface tension, conductimetry and microcalorimetry measurements. The thermodynamic parameters i.e. the critical micelle concentration (cmc), the degree of micelle ionization (alpha), the head group surface area (a 0), Delta H mic, Delta G mic and T Delta S mic are reported at 303 K. The thermodynamic parameters have been compared to those of the conventional surfactant cetyltrimethylammonium bromide (CTAB) in order to specify structural relationships. The obtained results have been discussed considering the hydrophobic behaviour of the S-C=S- linkage and the specific interactions that arise from the introduction of the benzene ring into the hydrophobic part.     

Solution properties of mixed surfactant systems (IV)

Electric properties of mixed anionic-nonionic surfactant systems in aqueous solutions above the CMC have been studied in terms of pNa values, electrical conductivities, and dielectric constants; these systems are sodium 3, 6, 9-trioxaicosanoate (ECL) — alkyl polyoxyethylene ethers (C_mPOE; m=12, 14, 16, and 18). The degree of ionic dissociation of mixed micelle increases with increasing the number of carbon atoms of the alkyl group in the nonionic surfactant. The electrical conductivity increases with increasing the alkyl chain length in the nonionic surfactant, in spite of the increase of the activation energy for conduction. The size of mixed micelles also increases with increasing alkyl chain length. This may be attributed to the fact that the mixed micelle is formed more easily by a nonionic surfactant including long alkyl chains than for one having shorter alkyl chains.     

Mixed micellar properties of cationic trimeric-type quaternary ammonium salts and anionic sodium n-octyl sulfate surfactants

The properties of quaternary ammonium salt-type cationic trimeric surfactants (m-2-m-2-m, m represents the carbon atom number in alkyl chain lengths of 8, 10, and 12) and oppositely charged anionic monomeric surfactant, sodium n-octyl sulfate (SOS), were characterized by employing several techniques such as static surface tension, fluorescence spectroscopy, and dynamic light-scattering measurements. The critical micelle concentrations (cmc) of m-2-m-2-m were much lower than those of the corresponding dimeric and monomeric surfactants, and decreased with increasing chain length. The addition of SOS to m-2-m-2-m solutions resulted in a further decrease of the cmc. The mixed surfactants showed higher efficiencies in lowering the surface tension than the individual surfactants. The fluorescence measurements suggested the formation of mixed micelles with a hydrophobic environment in the solutions even at lower concentrations. The dynamic light-scattering study indicated the presence of two different kinds of aggregates with different hydrodynamic diameters. The larger one was attributed to the mixed micelle of m-2-m-2-m and SOS. These results indicated a decline of the electrostatic repulsion between cationic head groups through the incorporation of anionic surfactant into the mixed surfactants.     

Interfacial and Thermodynamic Properties of Anionic‐Nonionic Mixed Surfactant System: Influence of Hydrophobic Chain Length of the Nonionic Surfactant

The influence of hydrophobic chain length in nonionic surfactants on interfacial and thermodynamics properties of a binary anionic‐nonionic mixed surfactant was investigated. In this study, nonionic surfactants lauric‐monoethanolamide (C₁₂ MEA) and myrisitic‐monoethanolamide (C₁₄ MEA) were mixed with an anionic surfactant, α‐olefin sulfonate (AOS). The critical micelle concentration (cmc), maximum surface excess (Γ_max), and minimum area per molecule (A_min) were obtained from surface tension isotherms at various temperatures. The thermodynamic parameters of micellization and adsorption were also computed. Micellar aggregation number (N_agg), micropolarity, and binding constant (K_sv) of pure and mixed surfactant system was calculated by fluorescence measurements. Rubingh's method was applied to calculate interaction parameters for the mixed surfactant systems.     

Synthesis and surface properties of semi-fluorinated gemini surfactants with two reactive bromo pendant groups

This paper presents a series of semi-fluorinated gemini surfactants with two bromo pendant groups. It reviews the effect of the number of methylene units in the spacer group between the two hydrophilic quaternary ammonium heads. Critical micelle concentration (cmc) and free energy of micellization (ΔG(M)(0)) of the title surfactants, in aqueous solution, have been investigated as a function of the number n of carbon atoms in the hydrocarbon spacer. We have pointed out a different behaviour as compared to Gemini hydrocarbon homologues. In the present study, when the number of methylene units (n) in the spacer increases, the cmc first decreases and reaches an optimum for (n=6), then it increases linearly from n≥6. Variations of cmc have been interpreted in terms of conformation changes of the surfactant ion and progressive penetration of the alkyl chain spacer in the micelle hydrophobic core. In this series, the increase of the hydrophobicity seems not to favour the micellisation process as expected, probably impacted by the mutual phobicity of the perfluorinated tails and the hydrocarbon spacer. A minimum is reached for a spacer with six methylene units which seems to be the optimal conformation. The free energy of micellization (ΔG(M)(0)) confirm this tendency.     

Thermodynamics of micellization of benzyl(2-acylaminoethyl)dimethylammonium chloride surfactants in aqueous solutions: a conductivity and titration calorimetry study

The enthalpies of micellization of the surfactant series benzyl(2-acylaminoethyl)dimethylammonium chlorides, RABzMe(2)Cl, have been determined by calorimetry and conductivity measurements in the temperature range 15-75 degrees C. Here R stands for an acyl group containing 10-16 carbon atoms and A, Bz, and Me stand for NH(CH(2))(2)N(+), benzyl, and methyl groups, respectively. The enthalpy of micellization, DeltaH(mic) degrees , and the critical micelle concentration, cmc, were calculated directly from calorimetric data. The free energy of micellization, DeltaG(mic) degrees , was obtained from the cmc and the conductance-based degree of counterion dissociation. There is an excellent agreement between DeltaG(mic) degrees calculated from the data of both techniques, but the DeltaH(mic) degrees , the entropy of micellization, values differ. The dependence of the thermodynamic parameters of micellization on the chain length of the hydrophobic group and on the temperature has been analyzed by considering the delicate balance between the factors that contribute to micelle formation, including transfer of the surfactant hydrocarbon chain from the aqueous environment to the micelle, with concomitant release of the solvating water molecules, and the effect of temperature on the structure of water. DeltaG(mic) degrees is more negative, that is, more favorable for RABzMe(2)Cl than for the structurally related alkylbenzyldimethylammonium chlorides. This is attributed to direct and water-mediated H bonding between the amide groups of molecules of the former series.