In Vivo Biological Behavior of Polymer Scaffolds of Natural Origin in the Bone Repair Process

Autologous bone grafts, used mainly in extensive bone loss, are considered the gold standard treatment in regenerative medicine, but still have limitations mainly in relation to the amount of bone available, donor area, morbidity and creation of additional surgical area. This fact encourages tissue engineering in relation to the need to develop new biomaterials, from sources other than the individual himself. Therefore, the present study aimed to investigate the effects of an elastin and collagen matrix on the bone repair process in critical size defects in rat calvaria. The animals (Wistar rats, n = 30) were submitted to a surgical procedure to create the bone defect and were divided into three groups: Control Group (CG, n = 10), defects filled with blood clot; E24/37 Group (E24/37, n = 10), defects filled with bovine elastin matrix hydrolyzed for 24 h at 37 °C and C24/25 Group (C24/25, n = 10), defects filled with porcine collagen matrix hydrolyzed for 24 h at 25 °C. Macroscopic and radiographic analyses demonstrated the absence of inflammatory signs and infection. Microtomographical 2D and 3D images showed centripetal bone growth and restricted margins of the bone defect. Histologically, the images confirmed the pattern of bone deposition at the margins of the remaining bone and without complete closure by bone tissue. In the morphometric analysis, the groups E24/37 and C24/25 (13.68 ± 1.44; 53.20 ± 4.47, respectively) showed statistically significant differences in relation to the CG (5.86 ± 2.87). It was concluded that the matrices used as scaffolds are biocompatible and increase the formation of new bone in a critical size defect, with greater formation in the polymer derived from the intestinal serous layer of porcine origin (C24/25).     

Synthesis of lupeol derivatives and their antileishmanial and antitrypanosomal activities

The natural product lupeol 1 was isolated from aerial parts of Vernonia scorpioides with satisfactory yield, which made it viable to be used as starting material in semisynthetic approach. Ten lupeol derivatives 2–11 were prepared by classical procedures. Including, five new esters derivatives 7–11, which were obtained by structural modifications in the isopropylidene fragment. All semisynthetic compounds and lupeol 1–11 were confirmed by ¹H NMR, ¹³C NMR and HRMS. Their antiprotozoal activity was evaluated in vitro against L. amazonensis and T. cruzi. Derivative 6 showed the best antitrypanosomal activity (IC₅₀ = 12.48 μg/mL) and the lowest cytotoxic derivative (CC₅₀ = 161.50 μg/mL). The mechanism of action of the most active derivatives (4, 6 and 11) is not dependent from the enzyme trypanothione reductase.     

Electrochemical impedance spectroscopy and linear polarization applied to evaluation of porosity of phosphate conversion coatings on electrogalvanized steels

In this work, electrochemical impedance spectroscopy and linear polarization are used in determining porosity of zinc phosphates, and of nickel and manganese modified zinc phosphates on electrogalvanized steel. The porosity of the phosphate layers ranges from 0.1% for the manganese-modified hopeite to 8% for hopeite, using the linear polarization and the electrochemical impedance spectroscopy techniques. The porosity values measured using the two techniques were in agreement. All impedance spectra of coated samples showed two steps, with two capacitive arcs and an inductive looping.     

Headspace single-drop microextration for the detection of organotin compounds

The performance of single-drop microextraction (SDME), coupled with gas chromatography/mass spectrometry, was assessed for the determination of tributyltin compounds in water and solid samples. Experimental parameters impacting the performance of SDME, such as microextraction solvent and sampling and stirring time, were investigated. Analytical results obtained by SDME were compared with those generated by conventional solid phase microextraction (SPME) and liquid-liquid extraction (LLE) for the determination of TBT in PACS-2 sediment certified reference material (CRM).     

Thermal analysis study on vaporization of some analgesics. Acetanilide and derivatives

The thermal behaviour of acetanilide (Ac) and two of its analogues, namely the para-ethoxyacetanilide (p-Eto Ac) and the para-bromoacetanilide (p-Br Ac), which are used as analgesics in the pharmaceutical industry was studied with a simultaneous TG/DSC unit. The examined analgesics showed two endothermic DSC peaks due to melting and vaporization. By combining the experimental TG data with the corresponding reference vapour pressure data obtained with the Antoine equation the plot of P versus v was derived. From the slope of this equation the constant k-value was determined for Ac. Then, using the same k-value the vapour pressures of p-Eto Ac and p-Br Ac were determined in the same temperature range. The vaporization enthalpies for all the studied compounds were obtained from different methods and a very good agreement was found. Vaporization follows a zero-order kinetics. The activation energy of vaporization (E_vap) was calculated from the dynamic TG experiments, using the Arrhenius equation.     

Synthesis of new mono-functionalised tetrathiafulvalene derivatives by reactions of etrathiafulvalenyllithium with aldehydes and ketones: X-ray crystal structures of TTF-CMe(OH)Fc, TTF-CMe(OMe)Fc and TTF-CH(OMe)TTF (Fc = ferrocenyl)

Reactions of tetrathiafulvalenyllithium (TTF-Li) with a range of aldehydes and ketones have been explored for the first time, to provide an efficient route to mono-functionalised TTF derivatives of general formulae TTF-CH(OH)R (R = alkyl, phenyl, tetrathiafulvalenyl and ferrocenyl) and TTF-CR(OH)R′ (R = alkyl, phenyl, R′ = alkyl, phenyl, tetrathiafulvalenyl, ferrocenyl, and R-R′ = fluorenyl). Subsequent transformations involving the reactive alcohol group of some of these compounds are reported. The structures of the three title compounds have been established by single-crystal X-ray analysis.     

Synthesis of 5-arylhistidines via a Suzuki-Miyaura cross-coupling

Microwave irradiation efficiently promoted the Suzuki-Miyaura reaction of a 5-bromohistidine with various arylboronic acids in the presence of a palladium catalyst. This methodology allowed the synthesis of histidines substituted at position 5 of the imidazole ring with a phenyl, a substituted phenyl, a pyridyl or a thienyl ring. The corresponding 5-arylhistidines were obtained in moderate to good yields.     

On the choice of active space orbitals in MCSCF calculations

We describe a procedure which may be used to aid selection of the active space in multiconfigurational self-consistent field (MCSCF) calculations for general chemical systems. Starting from a restricted Hartree-Fock calculation, we define a hierarchy of interacting virtual orbitals for every occupied orbital. The most strongly interacting orbitals are then taken to constitute the active space in a configuration interaction (CI) calculation. The natural orbital occupation numbers obtained from the CI calculation are then used to choose the active space to be used in a subsequent MCSCF calculation. We illustrate our method on a number of systems (Li₂, B₂, C₂, carbonyl oxide and the transition state for oxidation of H₂S by dioxirane). In all these cases, ‘intuitive’ active spaces are inadequate, as are active spaces derived from the natural orbitals of unrestricted Hartree-Fock calculations.     

1,2-Oxopalladation versus pi-allyl palladium route. A regioconvergent approach to a key intermediate for cyclopentanoids synthesis. New insights into the Pd(II)-catalyzed lactonization reaction

Regioconvergent synthesis of the key lactone 1 from an equimolar mixture of the two olefins 4 and 5 was achieved by unique Pd(II) chemistry. The synthetic versatility of lactone 1 has been demonstrated in the synthesis of iridoids and of the endo-Corey lactone 2, which is a key intermediate for the F(2)-isoprostane synthesis. Upon exposure of the sodium salts of 4 and 5 to a catalytic amount of Pd(OAc)(2) under oxygen, in the presence of AcOH, an isomeric lactone 12 was obtained in addition to the title compound 1. The Pd(II) lactonization was optimized by fine-tuning all the factors participating in the catalytic cycle: solvent, oxidant, co-oxidant, and Pd(II) source. The Hosokawa's heterobimetallic couple emerged as the catalyst of choice. With a Cu(II)-Pd(II) couple, the redox process was transferred to copper, and the formal oxidation state of palladium remained constant during the reaction. By virtue of this new methodology, lactone 1 was obtained in a rewarding 60% yield, along with isomeric lactone 12 in 30% yield. A detailed mechanistic study was carried out in order to elucidate the formation of lactones 1 and 12. Lactone 1 was formed from either olefin 8 or olefin 10; on the other hand, lactone 12 was formed exclusively from olefin 10. An intramolecular 1,2-acyloxypalladiation was invoked for the transformation of 8 into 1, whereas the pi-allyl complexes 13 and 11 were involved in the transformation of olefin 10 into 12 and 1, respectively.     

Adsorption of anionic dyes on chitosan beads. 1. The influence of the chemical structures of dyes and temperature on the adsorption kinetics

In this work, chitosan beads were synthesized in acidic medium and cross-linked in 1% glutaraldehyde solution. The characterization of the materials using TG/DTG, XRD, and BET surface areas showed that the beads did not modify their characteristics after the cross-linking reaction. The cross-linked beads were utilized as adsorbents for the removal of the yellow-, blue-, and red-anionic reactive dyes from aqueous solutions at pH 2.0. Adsorption of the yellow-dye increased from 25 to 50 degrees C. However, adsorption of the blue-dye decreased from 25 to 50 degrees C. Interestingly, the adsorption of the red-dye decreased from 25 to 35 degrees C and increased from 45 to 50 degrees C. The kinetic data were evaluated using an Avrami kinetic model, where the parameter n was related to the determination of changes in the adsorption mechanisms. Adsorption data of the dyes in relation to the contact time, the chemical structures of the dyes, and temperature were presented and were discussed.