Capillary zone electrophoresis of cationic and anionic drugs in methanol

The actual mobilities and dissociation constants of acidic and basic pharmaceuticals were determined in methanol. Actual mobilities were derived from the dependence of the effective mobilities of the analytes on the pH of the methanolic background electrolyte solution (pH(MeOH)). The pKa values of the pharmaceuticals in methanol (pK(a,MeOH)) were calculated by non-linear curve fitting to the measured mobility values. It was found that the shift in pKa value (when compounds were transferred from water to methanol) increased with the acidity of the analyte. The average pKa shift for compounds exhibiting acidic properties in water was ca. 5.5 units, and the shift for basic compounds about 2 units. As was shown for a mixture of beta-blockers, the calculated actual mobilities and pKa values can be utilised in the optimisation of pH conditions for separation. The practical value of the method was illustrated by the analysis of urine samples.     

A monomeric selenium(IV) diimide and a dimeric seleninylamine

The selenium(IV) diimide AdN=Se=NAd (Ad = 1-adamantyl) adopts a monomeric structure with a Z,E configuration in the solid state whereas the seleninylamine OSe(mu-NBut)2SeO crystallizes as the cis-dimer.     

Evaluation of epifluorescence image analysis of biofilm growth on stainless steel surfaces

Biofilm growth of Bacillus subtilis, Pseudomonas fragi, Pediococcus inopinatus and Listeria monocytogenes was studied on stainless steel surfaces at room and low temperatures to evaluate the results of traditional hygiene measures. The results were compared with those of image analysis of stainless steel surfaces in an epifluorescence microscope. Statistical analyses were carried out to determine the variations between the conventional cultivation swab method, the glycocalyx amount obtained using swabbing, and the values of the areas of the biofilm, slime and cells. As a general rule, old biofilms showed total counts at approximately the same levels as the young biofilm. The results showed that temperature affected the results for all strains except B. subtilis. The strains of Pe. inopinatus and Ps. fragi showed increased attachment at 6°C and L. monocytogenes at 25°C. The biofilm slime was more easily detached than the cells. The results indicated that the traditional swab method is not reliable for the measurement of biofilm formation on surfaces.     

Sonogashira cross-coupling of 3-bromo-1,2-diones: an access to 3-alkynyl-1,2-diones

A new general method for the synthesis of enols of cyclic 3-alkynyl-substituted 1,2-diketones is developed. Sonogashira cross-coupling of silyl enolates of cyclic 3-bromo-cyclopentane- and 3-bromo-cyclohexane-1,2-diones with variety of substituted acetylenes afforded enols of cyclic 3-alkynyl-1,2-diones with good yields (up to 93%) in a short reaction time. The starting 3-bromo-1,2-diones are easily obtainable by direct bromination of 1,2-diones with NBS.     

Reaction kinetics and solubility in water‐organic binary solutions are governed by similar solvation equilibria

The solvation effects observed in water‐organic solutions were studied by combining data for reaction kinetics and dissolution equilibria by means of a linear free‐energy (similarity) analysis. Kinetic data for the pH‐independent hydrolysis of (4‐methoxyphenyl)‐2,2‐dichloroacetate measured in this work and solubility data for naphthalene, and other substrates of low polarity, in aqueous binary mixtures of methanol, ethanol, acetonitrile, dimethyl sulfoxide (DMSO), and 1,4‐dioxane were used. Linear similarity relationships were discovered for these data over the full range of solvent compositions studied. To gain insight into the similarities observed between these different phenomena, molecular dynamics simulations were carried out for naphthalene and an ester in water–acetonitrile solutions. The results revealed considerable preferential solvation of these substrates by the co‐solvent. Linear relationships between the experimental data and the mole fractions of acetonitrile in the solvation shells of substrates were found. Surprisingly, a linear relationship was found between the mole fractions of acetonitrile in the solvation shells of the ester and naphthalene. This linearity indicated that a similar solvation mechanism governs even such different phenomena as dissolution and reaction kinetics. The relationships between the experimental data and the results of the molecular dynamics calculations found in this work explained the solvent effect observed in water‐organic solutions on the molecular level. Copyright © 2015 John Wiley & Sons, Ltd.     

Chemical characterization and ultrastructure study of pulp fibers

Understanding the ultrastructure and chemical characterization of pulp fibers is highly important in utilizing wood as a raw material in a wide scope of applications, such as forest biomass-based biorefineries and low-cost renewable materials. The observation of the ultrastructure is not possible without advanced microscopy and spectroscopy techniques. Therefore, this study focuses on exploring the ultrastructure of pulp fibers with helium ion microscopy (HIM) and scanning electron microscopy (SEM). For the analysis of chemical characterization in the pulp fibers, Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) were performed. For these studies, the pulp fiber samples were obtained mainly from three different wood species, i.e. spruce, birch and eucalyptus. They were received in the never dried state and dried with a critical point drier (CPD) to minimize pore collapse. The spectroscopy results showed a strong signal from crystalline cellulose and confirmed the absence of lignin after Kraft pulping and bleaching. However, with XPS about 2% of lignin was detected in eucalyptus pulp. The results obtained with the microscopy techniques are compared and indicating the nanofibril size, shape, surface roughness as well as their orientation in pulp fibers. To our knowledge, this is the first time that HIM is applied to study the ultrastructure of pulp fibers and compared against more conventional microscopy and spectroscopy techniques. The main differences between HIM and SEM were found to be related to the focusing and magnification. The individual nano- and microfibrils as well as their bundles were more easily visible with HIM than with SEM. Also, with HIM it was possible to get the total area in focus at once which was not the case with SEM. The increased understanding of the ultrastructure and chemical composition of wood pulp enhance the development of novel wood-based products and processes for their manufacture.     

GC–MS with photoionization of cold molecules in supersonic molecular beams—Approaching the softest ionization method

A new type of photoionization ion source was developed for the ionization of cold molecules in supersonic molecular beams (named Cold PI). The system was based on a GC–MS with supersonic molecular beams and its fly‐through EI of cold molecules ion source (Cold EI) plus quadrupole mass analyzer. A continuously operated deuterium VUV photoionization lamp was added and placed above and between the supersonic nozzle and skimmer whereas the Cold EI ion source served only as a portion of the ion transfer ion optics. The supersonic nozzle and skimmer were voltage biased and the VUV light crossed the supersonic expansion about 10 mm from the nozzle. We obtained over three orders of magnitude enhancement in the relative abundance of the molecular ion of squalane in Cold PI versus in photoionization of this compound as a thermal compound. Accordingly, we also proved that standard photoionization is not as soft ionization method as previously perceived for large compounds. We found that Cold PI is as soft as and possibly softer than field ionization; thus, it could be the softest known ionization method. The ionization yield was about 200–300 times weaker than with Cold EI yet our limit of detection was about 200 femtogram in SIM mode for cholesterol and pyrene which is reasonable. Practically, all hydrocarbons gave only molecular ions with rather uniform response whereas alcohols gave some molecular ions plus major fragment ions particularly with a loss of water (similarly to field ionization). We tested Cold PI in the GC–MS analysis of diesel fuels and analyzed the time averaged data for group type information. We also found that we can analyze the diesel fuels by fast under 20‐s flow injection analysis in which the generated averaged mass spectrum of molecular ions only could serve for the characterization of fuels.     

In-beam spectroscopy of 253, 254No

In-beam conversion electron spectroscopy experiments have been performed on the transfermium nuclei ^{253, 254}No using the conversion electron spectrometer SACRED in nearly collinear geometry in conjunction with the gas-filled separator RITU at the University of Jyv?skyl?. The experimental setup is discussed and the spectra are compared to Monte Carlo simulations. The implications for the ground-state configuration of ²⁵³No are discussed. Received: 21 March 2002 / Accepted: 16 May 2002 / Published online: 31 October 2002 RID="a" ID="a"e-mail: rdh@ns.ph.liv.ac.uk RID="b" ID="b"Present address: GANIL, F-14021 Caen, France. RID="c" ID="c"Permanent address: IReS Strasbourg, IN2P3-CNRS, F-67037-Strasbourg, France. RID="d" ID="d"Present address: CEA/DIF DCRE/SDE/LDN F-91680 Bruyeres-le-Chatel. RID="e" ID="e"Present address: Daresbury Laboratory, Daresbury WA4 4AD, UK. RID="f" ID="f"Permanent address: IPN Lyon, IN2P3-CNRS, F-69037 Lyon, France.     

Pentaerythrityltetramine scaffolds for solid-phase combinatorial chemistry

Straightforward synthesis for two pentaerythrityltetramine precursors, 2,2-bis(azidomethyl)propane-1,3-diamine (1) and 2-[N-(allyloxycarbonyl)aminomethyl]-2-azidomethylpropane-1,3-diamine (2), has been described. Both propane-1,3-diamines have been attached by reductive amination to a solid-supported backbone amide linker derived from 4-(4-formyl-3,5-dimethoxyphenoxy)butyric acid. The presence of the two methoxy substituents on the linker is essential to avoid cross-linking between two linkers. The remaining free primary amino group of the propane-1,3-diamine moiety may then be selectively acylated with an appropriately protected amino acid using conventional N,N-dicyclohexylcarbodiimide/1-hydroxybenzotriazole (DCC/HOBt) activation without any interference by the secondary amino function. The latter group may be subsequently acylated by an anhydride method. Sequential reduction of the azido group and removal of the allyloxycarbonyl protection from 2 allow further coupling of two different amino acids, and hence, this handle may be utilized in construction of branched structures containing four different amino acids or peptides. Solid-supported 1 may, in turn, be used for the synthesis of similar constructs containing two identical branches. It is worth noting that no acid-labile protecting groups are required in this approach, and hence, this dimension may be saved for the cleavage of the linker. The applicability of the scaffolds to library synthesis has been demonstrated by preparation of 11 pentaerythrityl-branched tetra- and octapeptides.     

From building block to natural products: a short synthesis and complete NMR spectroscopic characterization of (±)-anatabine and (±)-anabasine

A short and straightforward synthesis of the racemic tobacco alkaloids anatabine and anabasine in five and six steps, respectively, from 3-pyridinecarboxaldehyde utilizing Barbier-type Zn-mediated allylation and ring-closing olefin metathesis, as the key steps, is reported. Additionally, a complete NMR spectroscopic analysis of the final products is carried out and full assignment of the NMR spectra of anatabine and anabasine with accurate coupling constants is accomplished and reported here for the first time.