Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

Endoscopic Observation of Tissue by Narrowband Illumination

We propose a new illumination method for a medical endoscope: narrow band imaging (NBI), in which the spectral bandwidth of the filtered light is narrowed. To confirm how the spectral specifications of the filtered light influence a reproduced image, an experiment was conducted observing the endoscopic images of the back mucosa of a human tongue. In addition, the effect of NBI on endoscopic images was investigated through preliminary clinical tests in colonoscopy and upper gastrointestinal endoscopy. It has been shown that NBI can enhance the capillary pattern and the crypt pattern on the mucosa. These patterns are useful features for diagnosing an early cancer.     

THE FIRST EXPERIMENT OF A THz GYROTRON WITH A PULSE MAGNET

A THz gyrotron with a pulse magnet has been designed, constructed and operated in FIR FU. It is developed as one of high frequency gyrotrons included in Gyrotron FU Series. The gyrotron has already achieved the first experimental result for high frequency operations whose radiation frequency exceeds 1 THz. In this paper, the design detail and the operation test results for sub-terahertz to terahertz range are described. The second harmonic operation is confirmed experimentally at the expected frequency of 1.005 THz due to TE_6,11 cavity mode at the magnetic field intensity of 19.0 T.     

Successive phase transitions of [(PyO)(H/D)][AuCl4] (PyO=C5H5NO)

³⁵Cl NQR as well as heat capacity measurements of [(PyO)H][AuCl₄] and its deuterated analog [(PyO)D][AuCl₄] revealed successive phase transitions at 70.5 and 62.5 K, and at 71 and 63 K, respectively. The NQR frequency varied continuously through the upper transition point while discontinuously through the lower transition point. In the intermediate-temperature phase a remarkable decrease in the signal intensity was observed. These NQR observations as well as the feature of the heat capacity anomaly in which a broad peak is succeeded by a sharp peak with decreasing temperature suggest a possibility of normal-incommensurate-commensurate phase sequence.     

Melting behavior of poly(oxytetramethylene)-<Emphasis Type="Italic">alt</Emphasis>-(aromatic oligoamide) block copolymers

Using temperature-modulated differential scanning calorimetry, the melting behaviour of poly(oxytetramethylene)-alt-(aromatic oligoamide) (POTM-alt-AOA) has been studied in comparison with that of polyoxytetramethylene glycohols (POTMGs). The apparent melting temperature of the block copolymers is found to be less than that of the corresponding POTMGs by approximately 30°C. The relaxation time of melting of a POTM segment has been estimated and compared with that of POTMG. The relaxation time of POTM-alt-AOA is slightly shorter than that of POTMG when the molar mass of the POTM segment is 2900; however, it is longer when the molar mass is 1400.     

TG of polytetrahydrofuran/ isophoronediisocyanate reaction products

TG, swelling, and viscometric studies are presented for the residues, PTHF/IPDI polymer networks, and the extracts, the linear polymers and unreacted IPDI, after Soxhlet extraction of PTHF/IPDI reaction products. The products are obtained by reacting PTHF with 650, 1400, (2×650+1×2900), or 2900 of molecular mass with IPDI at various concentrations in bulk. The results on the swelling and the viscosity experiments suggest that the PTHF/IPDI reaction products have a usual expectable structure. All the TG curves are a double stage curve. The initial stage and the last stage seem to reflect decomposition of PTHF chains and vaporization of the remainder, IPDI, respectively. These are analyzed by a trial-and-error construction, supposing double event behavior. The values of ratio of mass loss associated with the initial event, W0₁, to the mass loss associated with the last event, W0₂, are smaller than the expectable those. This suggests that Event 2 involves vaporization of the decomposition products of PTHF moieties bonded to IPDI in addition to vaporization of IPDI. This revised version was published online in July 2006 with corrections to the Cover Date.     

Breakage of λ-DNA by inorganic tin and organotin compounds as environmental pollutants

In proportion to the environmental pollution problems caused by organotin compounds, the genotoxicities of tin compounds in the environments have become of interest so as to estimate their safety in recent years. In this work, isolated λ-DNA (double-strand DNA) was incubated with inorganic tin(II) and tin(IV) and five organotin compounds [n-butyltin trichloride, di(n-butyltin) dichloride, methyltin trichloride, dimethyltin dichloride and trimethyltin chloride] in reaction systems both with and without hydrogen peroxide (H₂O₂) content. The tin compounds tested in this study did not induce DNA breakage in the absence of hydrogen peroxide. Divalent inorganic tin (SnCl₂) and tetravalent inorganic tin (SnCl₄) caused DNA breakage in the presence of hydrogen peroxide (10 mM), and the DNA damage activity of inorganic tin was much more potent in divalent inorganic tin (SnCl₂) than in tetravalent inorganic tin (SnCl₄). Divalent inorganic tin (SnCl₂) induced DNA breakage in a concentration-dependent fashion at concentrations greater than 0.1 mM of SnCl₂ in the presence of hydrogen peroxide (10 mM). DNA breakage was not caused by n-butyltin compounds and methyltin compounds either in the presence or in the absence of hydrogen peroxide.     

Thermal analysis of polymer networks consisting of different homopolymers

TG and DSC were carried out on PMAA-net-POTM in order to elucidate the relation between the heterogeneity and the thermal changes; moreover, TG and DSC were carried out on PPOTMDM and PMAA to compare the results. The onset temperature in the last stage in the TG curve of PMAA-net-POTM increases as the concentrations of DMF and POTMDM in the polymerization decrease. This is explained in terms of plasticizers effects. A single peak due to fusion of POTM chains appears in the DSC curves of most copolymers. However, it is not seen in the DSC curves of copolymers with high heterogeneity. This is explained in terms of the freezing of POTM chains by frozen heterogeneous moieties.