Oxotitanium(IV) complexes of some bis‐unsymmetric Schiff bases: Synthesis,structural elucidation and biomedical applications

A number of oxotitanium(IV) complexes of the type TiOL with bis‐unsymmetric dibasic tetradentate Schiff base (LH₂) containing ONNO donor atoms have been synthesized. Mono‐Schiff base (OPD‐HNP) was prepared by the condensation of 1:3 molar ratio of 2‐hydroxy‐1‐naphthaldehyde (HNP) with o‐phenylenediamine (OPD). Dibasic unsymmetric tetradentate diamine Schiff bases were prepared by the reaction of OPD‐HNP with 2‐hydroxyacetophenone, 2‐hydroxypropeophenone, benzoylacetone, acetylacetone and ethylacetoacetate. Further, titanylacetylacetonate was reacted with these ligands to obtain their metal complexes. On the basis of analytical and physiochemical data, the formation of complexes as TiOL was suggested having square pyramidal geometry. Quantum mechanical approach also confirmed this geometry. The assessment of the synthesized ligands and their complexes showed that some behave as good inhibitors of mycelial growth against selected phytopathogic fungi but weak inhibitors against some selected bacteria. A few of them also showed antioxidant properties.     

Evaluating a time-delay of hydrogen production quantitatively in photosynthetic bacteria for stabilizing intermittency

Renewable energy is regarded as a clean energy source but has some problems, one of which is intermittency. To reduce this, the time-delay of hydrogen production by photosynthetic bacteria can be effective. In this study, we qualitatively evaluated the time-delay of hydrogen production by photosynthetic bacteria under various irradiation conditions, and we also quantitatively evaluated it by fitting the experimental data and the hydrogen production model with a genetic algorithm. As a result of model fitting, we found that the relationship between the lengths of the optimized time-delay of hydrogen production by photosynthetic bacteria and the amount of light irradiation is linear. And we also found that the time-delay of hydrogen production by photosynthetic bacteria had an upper limit under low light intensity. We have suggested the existence of an energy store mechanism in photosynthetic bacteria.     

Validation of primary formaldehyde gas standards prepared by dynamic thermogravimetry through a tri-national comparison of gaseous formaldehyde amount fraction

A validation study for primary formaldehyde gas standards was performed at three National Metrology Institutes: the Korea Research Institute of Standards and Science (KRISS), the National Metrology Institute of Japan (NMIJ) and the National Institute of Metrology of China (NIM). The studied materials had a nominal amount fraction of 2 μmol/mol formaldehyde in nitrogen balance and were prepared in 10-L aluminum cylinders by KRISS. The impurities in the materials were analyzed using a gas chromatograph/atomic emission detector and a Fourier-transform infrared spectrometer (FTIR). The stability of the materials was assessed for 1 year by KRISS using paraformaldehyde as a source for the primary standard gas and a cavity ring-down spectrometer (CRDS) instrument as the measurement method. The amount fraction of formaldehyde in the materials decreased linearly by 0.74 % each month. The studied materials that exhibited similar linear rates of decline were distributed to the participants. After the measurement was completed by the participants, the materials were returned to KRISS and the stability analysis based on the primary standard maintained at KRISS was repeated. NMIJ analyzed the materials using paraformaldehyde as the source of the primary standard of formaldehyde and FTIR analysis, whereas NIM used trioxane as the primary standard gas source and CRDS analysis. The results of the comparison revealed good agreement between the results and were within the expanded uncertainty of 2 % although each of them used different combinations of methods in the generation of primary gas standards and measurements.     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

Full automatic synthesis of [<Superscript>18</Superscript>F]THK-5351 for tau protein PET imaging in Alzheimer’s disease patients: 1 year experience

[¹⁸F]THK-5351, a new candidate for tau protein imaging, is based on an aryl quinoline structure. We report the full automatic synthesis using disposable cassettes under pH controlled [¹⁸F]fluorination. After the trapping of 88.5 ± 21.9 GBq of [¹⁸F]fluoride, it was eluted with potassium methansulfonate (KOMs) (pH 7.8)/K₂₂₂. After drying, 3 mg of the precursor was added to 1 mL DMSO and subjected to [¹⁸F]fluorination at 110 °C for 10 min. After hydrolysis, the final product was purified by HPLC. The overall radiochemical yield was 31.9 ± 11.1% (n = 22), satisfying all quality control criteria. It was stable for up to 6 h with high radiochemical purity as 99.8 ± 0.5%.     

A New Flexible Multibody Beam Element Based on the Absolute Nodal Coordinate Formulation Using the Global Shape Function and the Analytical Mode Shape Function

Several techniques for the reduced dimensionality of finite elementformulations were considered as component mode reduction methods in themiddle sixties. These techniques are widely used in flexiblemultibody simulations for solving small deformation problems. Theabsolute nodal coordinate formulation for solving large rotation anddeformation problems has been established as a full finite elementmethod instead of using similar kinds of reduction techniques. In thispaper, a reduced order absolute nodal coordinate formulation is newlyestablished by introducing the global beam shape function and theanalytical deformation modes as a full finite element. This formulationleads to a constant and symmetric mass matrix as the conventionalabsolute nodal coordinate formulation, and makes it possible to reducethe number of elements and system coordinates of the beam structurewhich undergoes large rotations and large deformations. Numericalexamples show that the excellent agreements between thepresent formulation and the conventional absolute nodal coordinateformulation using a large number of elements are examined. These results demonstratethat the present formulation has high accuracy in the sense that thepresent solutions are similar to the conventional ones with fewersystem coordinates, and high efficiency in computation.     

Thermal behavior and dismantlability of adhesives containing various inorganic salts

As a fundamental study on the development of dismantlable adhesives containing chemically reactive materials, the thermal behavior and dismantlability of an epoxy adhesive containing one of the twenty-seven inorganic salts (chlorides, perchlorates, and nitrates) were observed. In the thermal behavior measured by the differential scanning calorimetry, epoxy adhesives with inorganic salts containing iron, copper, zinc, and aluminum cations released heats of reaction at lower temperatures than the adhesive alone or the adhesives with other inorganic salts. Since such inorganic salts were considered to be effective candidates as fillers in dismantlable adhesives, the adhesion strengths of their mixtures with the adhesive were observed after heat aging at 270 °C for 30 min. The results showed that both chloride and perchlorate salts specifically decreased the adhesion strength after heating. On the other hand, the effect of nitrate salts on the decrease in adhesion strength was low in comparison with the chloride and perchlorate salts.     

Differences between PREMIER combustion in a natural gas spark-ignition engine and knocking with pressure oscillations

PREMIER (PREmixed Mixture Ignition in the End-gas Region) combustion occurs with auto-ignition in the end-gas region when the main combustion flame propagation is nearly finished. Auto-ignition is triggered by the increases in pressure and temperature induced by the main combustion flame. Similarly to engine knocking, heat is released in two stages when engines undergo this type of combustion. This pattern of heat release does not occur during normal combustion. However, engine knocking induces pressure oscillations that cause fatal damage to engines, whereas PREMIER combustion does not. The purpose of this study was to elucidate PREMIER combustion in natural gas spark-ignition engines, and differentiate the causes of knocking and PREMIER combustion. We applied combustion visualization and in-cylinder pressure analysis using a compression–expansion machine (CEM) to investigate the auto-ignition characteristics in the end-gas region of a natural gas spark-ignition engine. We occasionally observed knocking accompanied by pressure oscillations under the spark timings and initial gas conditions used to generate PREMIER combustion. No pressure oscillations were observed during normal and PREMIER combustion. Auto-ignition in the end-gas region was found to induce a secondary increase in pressure before the combustion flame reached the cylinder wall, during both knocking and PREMIER combustion. The auto-ignited flame area spread faster during knocking than during PREMIER combustion. This caused a sudden pressure difference and imbalance between the flame propagation region and the end-gas region, followed by a pressure oscillation.     

Monte carlo simulations for blue-phase structure in liquid crystals

Blue-phase liquid crystals form three-dimensional structures in a self-organizing manner and are similar to living tissue structures such as the teeth of mice and collagen tissues. This study presents numerical results regarding the conditions under which blue-phase liquid crystals occur. The Monte Carlo simulations are performed by employing an improved Lennard–Jones potential that considers anisotropy and chirality. The conditions for the formation of the blue phase, which vary with respect to the chirality, are examined first. The relationship between the anisotropic parameters and the chiral parameter for the formation of the blue phase is discussed. Identical blue-phase structures are obtained, even when the cell size and molecular number are varied drastically. This discussion is useful for considering the scale-up problem, which is almost always a difficult issue for molecular-scale simulations.