Two Coulomb waves theory for direct excitation

A theoretical model of Dewangan, in which the total scattering wave function is approximated by a distorted wave containing two Coulomb wave functions, is discussed and its relation with the Brauner-Briggs-Klar model for ionization is examined. An important feature of the theory is that it includes a second Born amplitude naturally and in addition, contains, albeit approximately, both real and imaginary parts of all higher order Born terms. The theory is applied to study the 1s→2s excitation of hydrogen by electrons in the energy range 54.4 to 400eV. The differential and integral cross sections predicted by the theory are compared with the results of other theories and experimental data at 54.4eV and a good agreement is found.     

Cyanine dyes as protectors of K562 cells from photosensitized cell damage

Several cyanine dyes were found to protect K562 leukemia cells against toxicity mediated by cis-di(4-sulfonatophenyl)diphenylporphine (TPPS2) and light. Most cyanine dyes derived from dimethylindole were better photoprotectors than cyanine dyes with other structures. This correlated with the fact that cyanine dyes derived from dimethylindole were predominately monomeric at millimolar concentrations within K562 cells, while other cyanine dyes formed aggregates. For cyanine dyes that are derived from dimethylindole and have absorption band wavelengths greater than 700 nm, fluorescence-energy transfer from TPPS2 to the cyanine dye was the most important mechanism for photoprotection. There was no spectroscopic evidence for complex formation between the cyanine dyes and TPPS2. The dimethylindole derivative, 1,1',3,3,3',3'-hexamethylindodicarbocyanine, was an excellent photoprotector, but a poor quencher of TPPS2 fluorescence and a relatively poor singlet-oxygen quencher. This cyanine dye may act by quenching excited triplet TPPS2. Singlet-oxygen quenching may contribute to the photoprotection provided by cyanine dyes not derived from dimethylindole. Differences in the subcellular distribution of the various cyanine dyes studied may have contributed to the different apparent mechanisms of photoprotection.     

Renewable sol-gel carbon ceramic electrodes modified with a Ru-complex for the amperometric detection of l-cysteine and glutathione

A renewable three-dimensional chemically modified carbon ceramic electrode containing Ru [(tpy)(bpy)Cl] PF₆ was constructed by sol-gel technique. It exhibits an excellent electro-catalytic activity for oxidation of l-cysteine and glutathione at pH range 2-8. Cyclic voltammetry was employed to characterize the electrochemical behavior of the chemically modified electrode. The electrocatalytic behavior is further exploited as a sensitive detection scheme for l-cysteine and glutathione by hydrodynamic amperometry. Optimum pH value for detection is 2 for both l-cysteine and glutathione. The catalytic rate constants for l-cysteine and glutathione were determined, which were about 2.1×10³ and 2.5×10³ M⁻¹ s⁻¹, respectively. Under the optimized condition the calibration curves are linear in the concentration range 5-685 and 5-700 μM for l-cysteine and glutathione determination, respectively. The detection limit (S/N=3) and sensitivity is 1 μM, 5 nA/μM for l-cysteine and 1 μM, 7.8 nA/μM for glutathione. The relative standard deviation (RSD) for the amperogram's currents with five injections of l-cysteine or glutathione at concentration range of linear calibration is <1.5%. The advantages of this amperometric detector are: high sensitivity, good catalytic effect, short response time (t<3 s), remarkable long-term stability, simplicity of preparation and reproducibility of surface fouling (RSD for six successive polishing is 3.31%). This sensor can be used as a chromatographic detector for analysis of l-cysteine and glutathione.     

Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.     

SINGLET-OXYGEN GENERATION AT GAS-LIQUID INTERFACES: A SIGNIFICANT ARTIFACT IN THE MEASUREMENT OF SINGLET-OXYGEN YIELDS FROM OZONE-BIOMOLECULE REACTIONS

Abstract— Several ozone-biomolecule reactions have previously been shown to generate singlet oxygen in high yields. For some of these orone-biomolecule reactions, we now show that the apparent singlet-oxygen yields determined from measurements of 1270 nm chemiluminescence were artifactually elevated by production of gas-phase singlet oxygen. The gas-phase singlet oxygen results from the reaction of gas-phase ozone with biomolecules near the surface of the solution. Through the use of a flow system that excludes air from the reaction chamber, accurate singlet-oxygen yields can be obtained. The revised singlet-oxygen yields (mol ¹O₂ per mol O₃) for the reactions of ozone with cysteine, reduced glutathione, NADH, NADPH, human albumin, methionine, uric acid and oxidized glutathione are 0.23 ± 0.02, 0.26 ± 0.02, 0.48 ± 0.04, 0.41 ± 0.01, 0.53 ± 0.06, 1.11 ± 0.04, 0.73 ± 0.05 and 0.75 ± 0.01, respectively. These revised singlet-oxygen yields are still substantial.     

Silver,iron, and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 MNPs catalyzed one‐pot five‐component reactions for the synthesis of tetrahydropyridines by tandem condensation of amines,aldehydes, and methyl acetoacetate

In this study, Ag, Ni²⁺, and Fe²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ nanoparticles (γ‐Fe₂O₃@HAp‐Ag, γ‐Fe₂O₃@HAp‐Ni²⁺, and γ‐Fe₂O₃@HAp‐Fe²⁺) as a new and reusable Lewis acid magnetic nanocatalyst was successfully synthesized and reported for an atom economic, extremely facile, and environmentally benign procedure for the synthesis of highly functionalized tetrahydropyridines derivatives 4a‐t is described by one‐pot five‐component reaction of 2 equiv of aldehydes 1 , 2 equiv of amines 2 , and 1 equiv of methyl acetoacetate 3 in EtOH at room temperature in good to high yields and short reaction time. The presented methodology offers several advantages such as easy work‐up procedure, reusability of the magnetic nanocatalyst, operational simplicity, green synthesis avoiding toxic reagents and solvent, mild reaction conditions, and no tedious column chromatographic separation.     

Sol–gel template synthesis of luminescent glass–ceramic rods

We report an original way to prepare luminescent glass–ceramic microrods containing Eu³⁺ doped BaF₂ nanocrystals by sol–gel chemistry within the pores of a polycarbonate template membrane. Structural characterization by scanning electron microscopy and X-ray diffraction has shown the formation of glass–ceramic microrods with 0.8-m diameter of and 10 μm length in which BaF₂ nanocrystals of about 30 nm size are embedded. Photoluminescence measurements have indicated the incorporation of Eu³⁺ ions inside the BaF₂ nanocrystals in a broad range of sites with low coordination symmetry. The comparison made with the bulk glass–ceramic indicated an influence of the dimensional constraints imposed by the membrane pores during xerogel formation and subsequent glass ceramization.     

A turn on ESIPT probe for rapid and ratiometric fluorogenic detection of homocysteine and cysteine in water with live cell-imaging

5(Benzothiazol-2-yl)-4-hydroxyisophthalaldehyde (BHI), an intense ESIPT containing molecule in mixed media loses its properties due to resonance-assisted H-bond (RAHB) in absolute water. Due to resonance-assisted H-bond the o-aldehyde is more reactive than the other one. With addition of cysteine/homocysteine into this solution the o-aldehyde group gets transformed into thiazolidine/thiazine ring, respectively, and the phenolic proton becomes free enough for transfer to nitrogen of the benzothiazole ring in excited state, that is, the ESIPT of BHI is turned on. Thus we can detect cysteine/homocysteine in water as well as in live cells.