调控碳材料的功函数以大幅度提升其电催化氧还原性能

氧的电催化还原反应是燃料电池装置与金属空气电池的阴极反应,具有重大的研究意义.在众多的非铂催化剂中,碳材料因其低廉的价格以及独特的物理化学性质受到了广泛的关注.自从发现氮掺杂的碳纳米阵列具有优异的氧还原活性后,不同类型的氮掺杂的碳也得到了深入研究.例如近年来兴起的由金属有机框架衍生的氮掺杂的碳材料,兼具丰富的氮位点及良好的三维结构.氮的掺杂对碳原子具有电子调控的作用,是其高氧还原活性的根本原因.本文对金属有机框架衍生的氮掺杂的碳材料进行进一步的电子结构的优化,以提升催化性能.功函是电子逸出表面所需的最少的能量,是材料的电子结构性质之一,其对氧还原反应的影响也有报道,早期以理论计算为基础,探究氧气分子在碳材料表面的解离能与氮掺杂的碳的表面功函的关系,后续则采用开尔文探针显微镜,直接测量了不同元素掺杂的碳表面功函,并建立起功函与氧还原动力学的线性关系.本文通过控制碳材料的功函来调节其电子结构.铯是一种经典的给电子物质,通过将电子注入到掺杂材料表面来降低其功函.因此,本文通过CsCO₃与2-甲基咪唑、Zn(NO₃)₂煅烧形成铯修饰的氮掺杂碳.电镜及XRD均观察不到所得材料中铯的存在,证明碳层中无大颗粒团聚的铯物种.EDS元素分布图表明,铯在碳层中呈原子级均匀分布.Raman谱结果表明,碳的G带发生明显的位置偏移,证明其面内电子结构发生了明显的改变.XPS结果证明铯成功与氮原子配位,通过铯氮键将电子注入到碳骨架.UPS则最终显示,经过铯的修饰,碳表面功函从4.25 eV下降到3.6 eV.表面功函的降低有利于氧气分子的解离,也调节OOH^*中间体的吸附,使其吸附的自由能更接近最优值.材料改性后氧还原性能明显提升,起始电位达到0.91 V vs RHE,半波电位达到0.83 V vs RHE,均接近商业Pt/C催化剂.氧还原反应的动力学电流密度随功函的降低而增大,验证了前人的结论.本文提供了一个较为新颖的电子结构调控策略,为设计新的氧还原催化剂提供了新的思路.     

Hierarchically Ordered Porous Carbon with Atomically Dispersed FeN4 for Ultraefficient Oxygen Reduction Reaction in Proton-Exchange Membrane Fuel Cells

The low catalytic activity and poor mass transport capacity of platinum group metal free (PGM-free) catalysts seriously restrict the application of proton-exchange membrane fuel cells (PEMFCs). Catalysts derived from Fe-doped ZIF-8 could in theory be as active as Pt/C thanks to the high intrinsic activity of FeN₄; however, the micropores fail to meet rapid mass transfer. Herein, an ordered hierarchical porous structure is introduced into Fe-doped ZIF-8 single crystals, which were subsequently carbonized to obtain an FeN₄-doped hierarchical ordered porous carbon (FeN₄/HOPC) skeleton. The optimal catalyst FeN₄/HOPC-c-1000 shows excellent performance with a half-wave potential of 0.80 V in 0.5 m H₂SO₄ solution, only 20 mV lower than that of commercial Pt/C (0.82 V). In a real PEMFC, FeN₄/HOPC-c-1000 exhibits significantly enhanced current density and power density relative to FeN₄/C, which does not have an optimized pore structure, implying an efficient utilization of the active sites and enhanced mass transfer to promote the oxygen reduction reaction (ORR).     

Tuning the electrocatalytic activity of Pt nanoparticles on carbon nanotubes via surface functionalization

Polyelectrolytes with various characteristic functional groups as interlinkers to anchor Pt nanoparticles were used to functionalize carbon nanotubes (CNTs) as Pt electrocatalyst support. It was found that polyanions (poly(styrenesulfonic acid) (PSS), and poly(acrylic acid sodium) (PAA)) have a beneficial effect on methanol electrooxidation on Pt nanoparticles supported on carbon nanotubes via modifying their electronic structure through charge transfer from polyanions to Pt sites and supply of oxygen-containing species. The increased electron density around Pt sites by the charge transfer from polyanions would cause partial filling of Pt 5d-bands, resulting in the downshift of d-band center and weaker chemisorption with oxygen-containing species (e.g. CO_ad). The weakened chemisorption of CO on Pt nanoparticles would promote the methanol electrooxidation. On the contrary, polycations would have an opposite effect on the electronic structure and chemisorption properties of Pt nanoparticles.     

复合材料梁Ⅱ型裂纹的有限元分析

对三点弯曲梁端部层间裂纹的Ⅱ型断裂性能进行了有限元分析。为克服裂纹面两岸节点相互嵌入问题，采用了界面元素，计算结果与理论预测进行了比较．     

Decorating Single-Atomic Mn Sites with FeMn Clusters to Boost Oxygen Reduction Reaction

The regulation of electron distribution of single-atomic metal sites by atomic clusters is an effective strategy to boost their intrinsic activity of oxygen reduction reaction (ORR). Herein we report the construction of single-atomic Mn sites decorated with atomic clusters by an innovative combination of post-adsorption and secondary pyrolysis. The X-ray absorption spectroscopy confirms the formation of Mn sites via Mn-N₄ coordination bonding to FeMn atomic clusters (FeMn_ac/Mn-N₄C), which has been demonstrated theoretically to be conducive to the adsorption of molecular O₂ and the break of O−O bond during the ORR process. Benefiting from the structural features above, the FeMn_ac/Mn-N₄C catalyst exhibits excellent ORR activity with half-wave potential of 0.79 V in 0.5 M H₂SO₄ and 0.90 V in 0.1 M KOH as well as preeminent Zn-air battery performance. Such synthetic strategy may open up a route to construct highly active catalysts with tunable atomic structures for diverse applications.     

Innovative Electrochemical Strategies for Hydrogen Production: From Electricity Input to Electricity Output

Renewable H₂ production by water electrolysis has attracted much attention due to its numerous advantages. However, the energy consumption of conventional water electrolysis is high and mainly driven by the kinetically inert anodic oxygen evolution reaction. An alternative approach is the coupling of different half-cell reactions and the use of redox mediators. In this review, we, therefore, summarize the latest findings on innovative electrochemical strategies for H₂ production. First, we address redox mediators utilized in water splitting, including soluble and insoluble species, and the corresponding cell concepts. Second, we discuss alternative anodic reactions involving organic and inorganic chemical transformations. Then, electrochemical H₂ production at both the cathode and anode, or even H₂ production together with electricity generation, is presented. Finally, the remaining challenges and prospects for the future development of this research field are highlighted.     

Electrocatalytic Synthesis of Nylon-6 Precursor at Almost 100 % Yield

Synthesis of cyclohexanone oxime via the cyclohexanone-hydroxylamine process is widespread in the caprolactam industry, which is an upstream industry for nylon-6 production. However, there are two shortcomings in this process, harsh reaction conditions and the potential danger posed by explosive hydroxylamine. In this study, we presented a direct electrosynthesis of cyclohexanone oxime using nitrogen oxides and cyclohexanone, which eliminated the usage of hydroxylamine and demonstrated a green production of caprolactam. With the Fe electrocatalysts, a production rate of 55.9 g h⁻¹ g_cat⁻¹ can be achieved in a flow cell with almost 100 % yield of cyclohexanone oxime. The high efficiency was attributed to their ability of accumulating adsorbed hydroxylamine and cyclohexanone. This study provides a theoretical basis for electrocatalyst design for C−N coupling reactions and illuminates the tantalizing possibility to upgrade the caprolactam industry towards safety and sustainability.     

Integrated Tandem Electrochemical-chemical-electrochemical Coupling of Biomass and Nitrate to Sustainable Alanine

Alanine is widely employed for synthesizing polymers, pharmaceuticals, and agrochemicals. Electrocatalytic coupling of biomass molecules and waste nitrate is attractive for the nitrate removal and alanine production under ambient conditions. However, the reaction efficiency is relatively low due to the activation of the stable substrates, and the coupling of two reactive intermediates remains challenging. Herein, we realize the integrated tandem electrochemical-chemical-electochemical synthesis of alanine from the biomass-derived pyruvic acid (PA) and waste nitrate (NO₃⁻) catalyzed by PdCu nano-bead-wires (PdCu NBWs). The overall reaction pathway is demonstrated as a multiple-step catalytic cascade process via coupling the reactive intermediates NH₂OH and PA on the catalyst surface. Interestingly, in this integrated tandem electrochemical-chemical-electrochemical catalytic cascade process, Cu facilitates the electrochemical reduction of nitrate to NH₂OH intermediates, which chemically couple with PA to form the pyruvic oxime, and Pd promotes the electrochemical reduction of pyruvic oxime to the desirable alanine. This work provides a green strategy to convert waste NO₃⁻ to wealth and enriches the substrate scope of renewable biomass feedstocks to produce high-value amino acids.     

PtRu nanoparticles supported on 1-aminopyrene-functionalized multiwalled carbon nanotubes and their electrocatalytic activity for methanol oxidation

A new synthesis method for the preparation of high-performance PtRu electrocatalysts on multiwalled carbon nanotubes (MWCNTs) is reported. In this method, bimetallic PtRu electrocatalysts are deposited onto 1-aminopyrene (1-AP)-functionalized MWCNTs by a microwave-assisted polyol process. The noncovalent functionalization of MWCNTs by 1-AP is simple and can be carried out at room temperature without the use of expensive chemicals or corrosive acids, thus preserving the integrity and the electronic structure of MWCNTs. PtRu electrocatalysts on 1-AP-functionalized MWCNTs show much better distribution with no formation of aggregates, higher electrochemically active surface area, and higher electrocatalytic activity for the electrooxidation of methanol in direct methanol fuel cells as compared to that on conventional acid-treated MWCNTs and carbon black supported PtRu electrocatalysts. PtRu electrocatalysts on 1-AP-functionalized MWCNTs also show significantly enhanced stability.