CeO2对低氟连铸保护渣转折温度和结晶性能的影响

研究了低氟条件下,稀土氧化物CeO2对连铸保护渣转折温度和结晶性能的影响,同时与常规的高氟连铸保护渣性能进行了对比分析。结果表明：在碱度R较低的条件下,随着CeO2含量的升高,转折温度和结晶温度均有先下降后上升的趋势;在碱度较高的情况下,CeO2的加入将明显提高连铸保护渣的转折温度和凝固温度。     

Silica supported potassium oxide catalyst for dehydration of 2-picolinamide to form 2-cyanopyridine

The dehydration of 2-picolinamide to produce 2-cyanopyridine was investigated thoroughly using silica supported potassium oxide as a heterogeneous catalyst. Both large specific surface area and pore size of SiO_2 (B) contributed to the favorable catalytic performance for the synthesis of 2-CP. In addition, the yield of 2-CP showed the linear relationship with the amounts of medium basicity of the catalysts,demonstrating that medium basic sites were the active sites of silica supported potassium oxide catalysts. The catalysts were further characterized by XRD and FT-IR to clarify the active species. The results indicated the Si—O—K group produced by the reaction of K_2CO_3 with Si—OH was the active species, which was further evidenced by the adjustment of the amount of Si—OH by silylation and hydroxylation procedure.     

碳酸二乙酯的合成方法

碳酸二乙酯是绿色的化工原料和合成中间体，具有很高的工业应用价值，它的合成受到国内外研究者的极大重视。本文简述了近些年来碳酸二乙酯合成方法的研究进展，介绍了光气法、酯交换法、氧化羰基化法、脱羰基法、二氧化碳直接合成法以及生化法的优缺点，并着重介绍了乙醇氧化羰基合成法。     

苯酚和草酸二甲酯在不同分子筛催化下的酯交换反应

研究了以TS－1、H－ZSM－5、Hβ和H－丝光沸石等不同分子筛为催化剂，苯酚和草酸二甲酯酯交换合成草酸二苯酯反应。通过对催化剂进行吸附吡啶的红外光谱和NH3－TPD表征，考察了不同分子筛催化剂的酸性和酸强度对草酸二苯酯合成反应的影响，确定了催化剂上的弱酸中心是催化苯酚和草酸二甲酯酯交换合成草酸二苯酯反应的活性位，且催化剂的酸性中心越多，酸量越大，催化活性越好。催化剂上的强酸中心促进了副产物苯甲醚的生成。     

Zhiber-Shabat方程的多辛几何和多辛隐式格式研究

Zhiber-Shabat方程,描述许多重要的物理现象,是一类重要的非线性方程,有着许多广泛的应用前景.本文给出Zhiber-Shabat方程的多辛几何结构和多辛Fourier拟谱方法.数值算例结果表明多辛离散格式具有较好的长时间的数值稳定性.     

高功率宽调谐范围掺Yb3+光子晶体光纤激光器

采用闪耀光栅作为色散元件,构建了前向、后向输出两种结构的可调谐掺Yb3 光子晶体光纤激光器,并对其输出特性进行了分析研究.在抽运功率5.75W时,前向输出结构实现了1050.6～1110.2 nm的连续调谐输出,光谱线宽约0.1 nm,边模抑制比大于44 dB.在调谐激光波长为1085 nm时,得到最高输出功率677 mW.结构改进的后向输出结构的可调谐输出结构在抽运功率4.43 W,调谐波长1075 nm,实现了2.21 W的功率输出,斜率效率为73%;调谐范围50.9 nm(1042.1～1093 nm),光谱线宽小于0.08 nm,边模抑制比大于50 dB.两种结构的可调谐激光器输出均为线偏振光,偏振度大于89.5%.     

An optimal insurance strategy for an individual under an intertemporal equilibrium

In this paper, we discuss how a risk-averse individual under an intertemporal equilibrium chooses his/her optimal insurance strategy to maximize his/her expected utility of terminal wealth. It is shown that the individual’s optimal insurance strategy actually is equivalent to buying a put option, which is written on his/her holding asset with a proper strike price. Since the cost of avoiding risk can be seen as a risk measure, the put option premium can be considered as a reasonable risk measure. Jarrow [Jarrow, R., 2002. Put option premiums and coherent risk measures. Math. Finance 12, 135-142] drew this conclusion with an axiomatic approach, and we verify it by solving the individual’s optimal insurance problem.     

Thermal behaviour and mechanical properties of novel RTV silicone rubbers using divinyl-hexa[(trimethoxysilyl)ethyl]-POSS as cross-linker

Divinyl-hexa[(trimethoxysilyl)ethyl]-POSS (DVPS) as an octavinyl-POSS derivative was first prepared. A series of novel polydimethylsiloxane (PDMS)/DVPS hybrid materials as room temperature vulcanized (RTV) silicone rubber were prepared. The chemical incorporation of novel POSS into hydroxyl-terminated PDMS system by hydrolytic condensation reaction was verified by attenuated total reflection (ATR) infrared spectroscopy. Thermal degradation, thermo-oxidative stability and mechanical properties of these novel RTV silicone rubbers were studied by means of thermogravimetric analysis and tensile testing. The results exhibited significantly enhanced effects on the thermal stabilities and mechanical properties as compared to the PDMS polymer prepared with tetraethoxysilane (TEOS). The observed improvements in thermal properties could be attributed to the effective three-dimensional network structures resulting from the structure of DVPS. The thermal decomposition of the RTV silicone rubbers in nitrogen was also monitored by TGA coupled with real-time FTIR, and the degradation residues were also characterized by FTIR. It was found that the POSS cross-linker facilitated the formation of cross-links in the degradation residues. The striking improvement in mechanical properties could be attributed to the synergistic action of the structure of three-dimensional multi-arm cross-linker (vinyl-POSS derivative), the plasticization of self-cross-linking Vinyl-POSS derivative and perfect distribution of vinyl-POSS derivative.